{"title":"Commercial Mixers \u0026 DSP","description":"","products":[{"product_id":"bss-blu-50-4x4-signal-processor-with-blu-link","title":"BSS BLU-50 4x4 Signal Processor with BLU Link","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-50 4x4 Signal Processor with BLU Link\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe BLU-50 is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable.\u003cbr\u003e\nThe analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.\u003cbr\u003e\nThe BLU-50 features BLU link, a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.\u003cbr\u003e\nThe BLU-50 is configured, controlled and monitored from HiQnet Audio Architect™ or HiQnet London Architect™ and is compatible with other members of the Soundweb London family. Its 48 channel BLU link bus represents channels 1-48 of the larger 256 channel BLU link bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus.\u003cbr\u003e\nAs with other Soundweb London devices, 12 Control Inputs, six Logic Outputs and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e4 Analog Inputs (with 48v Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e4 Analog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet London Architect\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12-48VDC or PoE+ Powering Options (12VDC Power Supply Included)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRack Mount, Surface Mount and Desk Mount Installation Options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e\nPer Input: Signal Present, CLIP, 48V (Input only)\u003cbr\u003e\nOther: COM, STAT, ERR, PWR\u003cbr\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 4 electronically balanced on Phoenix Mini Combicon removable screw connectors\u003cbr\u003e\nMic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e\nInput Impedance: 3.5kΩ\u003cbr\u003e\nMaximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e\nCMRR: \u0026gt;45dB at 1KHz\u003cbr\u003e\nInput Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003e\nPhantom Power: 48V nominal, selectable per input\u003cbr\u003e\nA\/D Latency: 37\/Fs \u0026lt;0.77ms@48k\u0026gt;\u003cbr\u003e\n\u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e 4 electronically balanced on Phoenix Mini Combicon removable screw connectors\u003cbr\u003e\nMaximum Output Level: +20dBu\u003cbr\u003e\nFrequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e\nTHD: 0.005% typical at +4 dBu, 1kHz, 0 dB input gain\u003cbr\u003e\nDynamic Range: 110dB A-weighted, \u0026gt;107dB unweighted\u003cbr\u003e\nCrosstalk: \u0026lt;-100dB\u003cbr\u003e\nOutput Impedance: 120Ω\u003cbr\u003e\nD\/A Latency: 29\/Fs \u0026lt;0.60ms@48k\u0026gt;\u003cbr\u003e\n\u003cstrong\u003eBLU link:\u003c\/strong\u003e\u003cbr\u003e\nConnectors: 2 x RJ45 Ethernet connectors\u003cbr\u003e\nMaximum Cable Length: 100m\/300ft on Category 5e cable between devices\u003cbr\u003e\nMax. Number of Nodes: 60\u003cbr\u003e\nLatency: 11\/Fs \u0026lt;0.23ms@48k\u0026gt;\u003cbr\u003e\nPass Through Latency: 4\/Fs \u0026lt;0.08ms@48k\u0026gt;\u003cbr\u003e\n\u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e\nPower Requirements: 12-48VDC\u003cbr\u003e\nPower Adapter: 100-240VAC 50\/60 Hz, 12VDC output\u003cbr\u003e\nPower Consumption: \u0026lt;55VA\u003cbr\u003e\nBTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e\nOperating Temp. Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e\nDims: (H(U) x W x D): 1.625” (41mm) x 8.63” (219mm) x 7.75” (197mm)\u003cbr\u003e\nWeight: 2.82 lbs \/ 1.28 kg\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510579105989,"sku":"BSS-SIGPRSS-BLU50","price":1975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/a67b6c1c-2feb-4647-b1df-4d264609a691.jpg?v=1737062236"},{"product_id":"jbl-csm14-4-inputs-1-output-unsurpassed-commercial-mixer","title":"JBL CSM14 4 Inputs 1 Output Unsurpassed Commercial Mixer","description":"\u003ch2\u003eJBL CSM14 | 4 Inputs 1 Output Unsurpassed Commercial Mixer\u003c\/h2\u003e\n\u003cp\u003eThe JBL CSM14 is the epitome of superior sound quality in the commercial sound mixer market. Engineered with the combined technological advancements of renowned HARMAN brands, this mixer is designed to deliver unparalleled audio performance. Whether it’s for background music in a restaurant or paging in a school, the JBL CSM14 proves to be an incredibly versatile unit that adapts to a wide range of applications. This robust commercial mixer stands out with its easy configuration, making it suitable for use in schools, hospitals, fitness facilities, and more. The JBL CSM14 ensures a seamless and efficient user experience, engineered for effortless operation and excellent results.\u003cbr\u003eThe JBL CSM14 features RJ45 connectors compatible with JBLCSR-V in-wall volume controls, providing a simplified setup for various environments. Its universal power supply is adept at handling AC voltages ranging from 100 to 240 VAC, 50\/60 Hz, making it globally compatible. Adhering to HARMAN’s GreenEdge standards, the JBL CSM14 is an energy-efficient unit, boasting a lighter weight and a space-saving design that aligns with RoHS standards. This commercial mixer is not just designed for performance but also for sustainability and convenience, offering a modern answer to commercial audio needs.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 inputs with 1 channel output\u003c\/li\u003e\n\u003cli\u003eFanless, space-saving 1U design\u003c\/li\u003e\n\u003cli\u003eConfigurable output routing (2 channel models only)\u003c\/li\u003e\n\u003cli\u003eIndependent base\/treble controls\u003c\/li\u003e\n\u003cli\u003eEuro-block type mic\/line input and output connectors, and unbalanced RCA inputs for consumer connection\u003c\/li\u003e\n\u003cli\u003eSupports JBL CSR-V wall controller via Ethernet cable\u003c\/li\u003e\n\u003cli\u003ePriority muting, VOX ducking, and phantom power for all models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 4\u003c\/li\u003e\n\u003cli\u003eOutput Channels: 1\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Mic): 3mVrms\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Line): 775mVrms\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (RCA): 300mVrms\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 27VDC\u003c\/li\u003e\n\u003cli\u003ePriority Muting: Yes\u003c\/li\u003e\n\u003cli\u003eConfigurable Output Routing: No\u003c\/li\u003e\n\u003cli\u003eAC Line Voltage: 100 - 240V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7\" x 8.6\" x 11.9\" (43.3mm x 218.5mm x 303.4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJBL CSM14 Commercial Mixer\u003c\/li\u003e\n\u003cli\u003ePower Cable\u003c\/li\u003e\n\u003cli\u003eUser Manual\u003c\/li\u003e\n\u003cli\u003eWarranty Card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBL Professional","offers":[{"title":"Default Title","offer_id":42510663221445,"sku":"JBL-MIXER-CSM14","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/e12e7a0b-8b15-42e3-a988-f3d47a735185.jpg?v=1737104963"},{"product_id":"jbl-csm28-8-inputs-2-outputs-unsurpassed-commercial-mixer","title":"JBL CSM28 8 Inputs 2 Outputs Unsurpassed Commercial Mixer","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eJBL CSM28 | 8 Inputs 2 Outputs Unsurpassed Commercial Mixer\u003c\/h2\u003e\u003cp\u003eThe JBL CSM28 8 Inputs 2 Outputs Unsurpassed Commercial Mixer is an ideal solution for diverse commercial audio applications including background music, security, and paging. This versatile mixer is engineered to meet the rigorous needs of environments such as schools, hospitals, restaurants, and fitness facilities. Designed with a consideration for energy efficiency, the CSM28 adheres to HARMAN’s GreenEdge clean standards, offering a lightweight and space-saving design that is also RoHS compliant.\u003c\/p\u003e\u003cp\u003eThis commercial mixer features RJ45 connectors to integrate seamlessly with JBL CSR-V in-wall volume controls, and its universal power supply accommodates AC voltages from 100 to 240 VAC, 50\/60 Hz. The CSM28 not only ensures excellent audio performance but also comes with a sleek industrial look, complete with illuminated rings for enhanced usability in low-light environments. Its fanless design conserves space and reduces noise, making it perfect for installations where quiet operation is critical.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 inputs with 2 channel outputs\u003c\/li\u003e\n\u003cli\u003eFanless, space-saving 1U design\u003c\/li\u003e\n\u003cli\u003eIndependent base\/treble controls\u003c\/li\u003e\n\u003cli\u003eEuro-block type mic\/line input and output connectors, and unbalanced RCA inputs for consumer connection\u003c\/li\u003e\n\u003cli\u003eSleek industrial look with illuminated rings\u003c\/li\u003e\n\u003cli\u003eConfigurable output routing (2 channel models only)\u003c\/li\u003e\n\u003cli\u003eSupports JBL CSR-V wall controller via Ethernet cable\u003c\/li\u003e\n\u003cli\u003ePriority muting, VOX ducking, and phantom power for all models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInputs: 8\u003c\/li\u003e\n\u003cli\u003eOutput Channels: 2\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Mic): 3mVrms\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Line): 775mVrms\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (RCA): 300mVrms\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 27VDC\u003c\/li\u003e\n\u003cli\u003ePriority Muting: Yes\u003c\/li\u003e\n\u003cli\u003eAC Line Voltage: 100 - 240V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.7\" x 17.2\" x 11.9\" (43.3mm x 437mm x 303.4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePackage Contents\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJBL CSM28 Commercial Mixer\u003c\/li\u003e\n\u003cli\u003ePower Supply Cable\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003eWarranty Information\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBL Professional","offers":[{"title":"Default Title","offer_id":42510663286981,"sku":"JBL-MIXER-CSM28","price":620.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/7f6c0fd1-afc9-438b-9f77-c03625e82d24.jpg?v=1737104968"},{"product_id":"bosch-plm-8m8-us-8-zone-channel-dsp-digital-matrix-mixer","title":"Bosch PLM-8M8-US 8-Zone Channel DSP Digital Matrix Mixer","description":"\u003cp\u003e\u003cstrong\u003eBosch PLM-8M8-US 8-Zone Channel DSP Digital Matrix Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe PLM-8M8 PLENA matrix 8 Channel DSP Matrix Mixer is designed for maximum flexibility and reliability. It is the heart and soul of the PLENA matrix system. When combined with PLM-8CS call stations, PLM-WCP wall control panels and the PLM-4Px2x amplifiers; it is suitable for almost any application that requires up to 8 zones of high fidelity speech and background music (BGM). The audio quality is suitable for live music, background music, high demand speech environments and zone announcement applications. Some typical application include: Shopping centers, schools, restaurants, bars, nightclubs, cafes, gyms, recreational facilities, churches, warehouses, office buildings, regional airports, train stations, bus terminals, boardrooms, meeting rooms, conference facilities, small theme parks, museums, back of house performing arts centers and sports stadia.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eComplete DSP zone matrix mixer and loudspeaker processor\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e4 microphone\/line, 3 music source, call station and emergency inputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 independent output zones, and \"Amp Link\" outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEthernet control and Windows PC GUI, and an iOS app for zone control via iPhone and iPad\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRS485 connection for call stations and wall control panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003ePower supply\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eMains voltage:\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eNominal input voltage\u003c\/strong\u003e\u003cbr\u003e 100 - 240 VAC -,+10%,\u003cbr\u003e 50\/60 Hz\u003cbr\u003e \u003cstrong\u003eInput voltage limits\u003c\/strong\u003e \u003cbr\u003e 90 - 264 VAC\u003cbr\u003e \u003cstrong\u003ePower consumption\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eNo devices connected\u003c\/strong\u003e \u003cbr\u003e \u003cstrong\u003eMax. load\/max. devices connected\u003c\/strong\u003e\u003cbr\u003e 54 W\u003cbr\u003e \u003cstrong\u003ePerformance\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eFrequency response (-1dB) \u003c\/strong\u003e\u003cbr\u003e 20 Hz to 20 kHz (+0\/-3 dB)\u003cbr\u003e \u003cstrong\u003eMic.\/line input 4x\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eInput Clip level:\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003ePad off \u003c\/strong\u003e\u003cbr\u003e 8.4 dBu (6.2 dBV)\u003cbr\u003e \u003cstrong\u003ePad on\u003c\/strong\u003e \u003cbr\u003e 24.2 dBu (21.9 dBV)\u003cbr\u003e \u003cstrong\u003eCMRR (1 kHz, 0 dBFS)) \u003c\/strong\u003e\u003cbr\u003e \u0026gt;46 dB\u003cbr\u003e \u003cstrong\u003ePhantom power supply \u003c\/strong\u003e\u003cbr\u003e 48 V\u003cbr\u003e \u003cstrong\u003eTHD \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eDynamic range (A\u003c\/strong\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cstrong\u003eweighted) \u003c\/strong\u003e\u003cbr\u003e \u0026gt;103 dB\u003cbr\u003e \u003cstrong\u003eConnectors \u003c\/strong\u003e\u003cbr\u003e 4x XLR\/TRS combo\u003cbr\u003e \u003cstrong\u003eBGM inputs 3x\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eInput clip (Pad on) \u003c\/strong\u003e\u003cbr\u003e 10.2 dBu (8 dBV)\u003cbr\u003e \u003cstrong\u003eTHD \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eDynamic range (A\u003c\/strong\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003cstrong\u003eweighted)\u003c\/strong\u003e\u003cbr\u003e \u0026gt;103 dB\u003cbr\u003e \u003cstrong\u003eConnectors \u003c\/strong\u003e\u003cbr\u003e 3x pair of Cinch RCA\u003cbr\u003e \u003cstrong\u003eOutputs\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eOutput level \u003c\/strong\u003e\u003cbr\u003e 17.7 dBu (15.5 dBV)\u003cbr\u003e \u003cstrong\u003eLogic inputs\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConnector \u003c\/strong\u003e\u003cbr\u003e 2-pole Phoenix terminal (metric) \u003cbr\u003e \u003cstrong\u003e8CS and WCP (RS485)\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eCall station connector \u003c\/strong\u003e\u003cbr\u003e 1x RJ45\u003cbr\u003e \u003cstrong\u003eWall control panel connector \u003c\/strong\u003e\u003cbr\u003e 1x RJ45\u003cbr\u003e \u003cstrong\u003eAmplifier 2x\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConnector \u003c\/strong\u003e\u003cbr\u003e RJ45\u003cbr\u003e \u003cstrong\u003eNominal level \u003c\/strong\u003e\u003cbr\u003e 1 V\u003cbr\u003e \u003cstrong\u003eImpedance \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eEthernet (10\/100 MbIt's) 1x\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eConnector \u003c\/strong\u003e\u003cbr\u003e RJ45\u003cbr\u003e \u003cstrong\u003eMechanical\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eDimensions (H x W x D) \u003c\/strong\u003e\u003cbr\u003e 45 x 440 x 358 mm\u003cbr\u003e 1.8 x 17.3 x 14.1 in\u003cbr\u003e (19\" wide, 1RU high)\u003cbr\u003e \u003cstrong\u003eMounting \u003c\/strong\u003e\u003cbr\u003e Stand-alone, 19\" rack\u003cbr\u003e \u003cstrong\u003eColor \u003c\/strong\u003e\u003cbr\u003e Trafic black (RAL 9017)\u003cbr\u003e Silver (RAL 9006)\u003cbr\u003e \u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e Approx. 6 kg\u003cbr\u003e Approx. 13.23 lb\u003cbr\u003e \u003cstrong\u003eEnvironmental\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eOperating temperature \u003c\/strong\u003e\u003cbr\u003e -10 degrees C to +45 degrees C\u003cbr\u003e \u003cstrong\u003eStorage temperature \u003c\/strong\u003e\u003cbr\u003e -40 degrees C to +70 degrees C\u003cbr\u003e \u003cstrong\u003eRelative humidity \u003c\/strong\u003e\u003cbr\u003e \u0026lt;95%\u003c\/p\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":42510664204485,"sku":"BOS-AMP-PLM8M8US","price":1979.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1plm8m8us__64276.jpg?v=1706835793"},{"product_id":"bss-blu-806-networked-signal-processor-with-dante-blu-link-chassis","title":"BSS BLU-806 Networked Signal Processor with Dante BLU Link Chassis","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-806 Networked Signal Processor with Dante BLU Link Chassis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-806 offers configurable I\/O, configurable signal processing, Dante audio and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e\nThe BLU-806 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e\nThis processor features Dante audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.\u003cbr\u003e\nPhantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.\u003cbr\u003e\n12 Control Inputs and 6 Logic Outputs allow the BLU-806 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e\nThe BLU-806 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eFour Input \/ Output Card Slots\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Inputs \/ Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAEC Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTelephone Hybrid Card\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDante Audio\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eInformative Front Panel Display\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIntegration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e\nPer Input: Signal Present, CLIP, SYNC\/48V, I\/O card type (IN, OUT, DIG, AEC)\u003cbr\u003e\nOther: LCD Display, Conductor active, Network Link active,Data Activity\u003cbr\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e\nMic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e\nInput Impedance: 3.5kΩ\u003cbr\u003e\nMaximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e\nCMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e\nInput Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003e\nPhantom Power: 48V nominal, selectable per input\u003cbr\u003e\nA\/D Latency: 38.7\/Fs\u003cbr\u003e\n\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e\nInput Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e\nSample Rate: 48kHz or 96kHz\u003cbr\u003e\nSample Rate Conversion: 8kHz-96kHz\u003cbr\u003e\nTHD+N: \u0026lt;-140dB\u003cbr\u003e\nLatency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e\n\u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e\nMaximum Output Level: +19dBu\u003cbr\u003e\nFrequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e\nTHD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e\nDynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e\nCrosstalk: \u0026lt;-75dB\u003cbr\u003e\nD\/A Latency: 28\/Fs\u003cbr\u003e\n\u003cstrong\u003eDigital Outputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e\nOutput Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e\nSample Rate: 48kHz or 96kHz\u003cbr\u003e\nSample Rate Conversion: 8kHz-96kHz\u003cbr\u003e\nTHD+N: \u0026lt;-140dB\u003cbr\u003e\nLatency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e\n\u003cstrong\u003eDante Audio Network:\u003c\/strong\u003e\u003cbr\u003e\nConnectors: 2 x RJ45 connectors\u003cbr\u003e\nMaximum Cable Length: 100m\/300ft on Category 5e cable between device and Ethernet switch or router\u003cbr\u003e\n\u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e\nMains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e\nPower Consumption: \u0026lt;55VA\u003cbr\u003e\nBTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e\nOperating Temperature Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e\nDimensions (H(U) x W x D): 1.75\" (1U) x 19\" x 12.5\" (45mm x 483mm x 318mm)\u003cbr\u003e\nWeight: 9 lbs \/ 4.1 kgs (estimated)\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812315845,"sku":"BSS-SIGPRSS-BLU806","price":9471.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu806__51146.jpg?v=1706839145"},{"product_id":"bss-blu-160-signal-processor-with-blu-link","title":"BSS BLU-160 Signal Processor with BLU Link","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-160 Signal Processor with BLU Link\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-160 offers configurable I\/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e 12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eFour Input \/ Output Card Slots\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Inputs \/ Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAEC Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTelephone Hybrid Card\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eInformative Front Panel Display\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIntegration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eFront Panel Led Indicators:\u003cbr\u003e Per Input: Signal Present, CLIP, SYNC\/48V, I\/O card type (IN, OUT, DIG, AEC)\u003cbr\u003e Other: LCD Display, Data Activity\u003cbr\u003e Analog Inputs: Up to 16 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e Mic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e Input Impedance: 3.5kΩ\u003cbr\u003e Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e CMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e Input Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003e Phantom Power: 48V nominal, selectable per input\u003cbr\u003e A\/D Latency: 38.7\/Fs\u003cbr\u003e Digital Inputs: Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Input Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e Analog Outputs: Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Maximum Output Level: +19dBu\u003cbr\u003e Frequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e THD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e Dynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e Crosstalk: \u0026lt;-75dB\u003cbr\u003e D\/A Latency: 28\/Fs\u003cbr\u003e Digital Outputs: Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Output Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e Digital Audio Bus:\u003cbr\u003e Connectors: 2 x RJ45 Ethernet connectors\u003cbr\u003e Maximum Cable Length: 100m\/300ft on Category 5e cable between devices\u003cbr\u003e Maximum Number of Nodes: 60\u003cbr\u003e Latency Per Node: 4(+\/-1)Fs\u003cbr\u003e Power and Dimensions:\u003cbr\u003e Mains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e Power Consumption: \u0026lt;35VA\u003cbr\u003e BTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e Operating Temperature Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e Dimensions (H(U) x W x D): 1.75\" (1U) x 19\" x 12.5\"(45mm x 483mm x 318mm)\u003cbr\u003e Weight: 9 lbs \/ 4.1 kgs (estimated)\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812545221,"sku":"BSS-SIGPRSS-BLU160","price":5110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu160__21919.jpg?v=1706839134"},{"product_id":"bss-blu-100-12x8-signal-processor-with-blu-link","title":"BSS BLU-100 12x8 Signal Processor with BLU Link","description":"\u003cp\u003eI will regenerate the HTML, ensuring the main specification categories now have the same bullet style as the \"Key Features\" and \"Package Content\" sections. The nested specifications will remain formatted with the p tags and inline styles you requested previously. BSS BLU-100: Open Architecture Signal Processor with BLU Link\u003c\/p\u003e\n\u003cp\u003eElevate your audio system's performance and design with the BSS BLU-100, a highly versatile and powerful open architecture signal processor. Ideal for a wide range of installed sound applications, from corporate meeting rooms to live performance venues, the BLU-100 offers a fixed configuration of 12 analog inputs and 8 analog outputs. Its open architecture allows for complete customization and configuration via the intuitive HiQnet™ Audio Architect software, providing a rich palette of processing and logic objects to meet the unique demands of your project. Featuring a 48-channel, low-latency, and fault-tolerant digital audio bus, the BLU-100 seamlessly integrates with other BSS Soundweb London devices using standard Category 5e cabling over distances up to 100 meters. The unit is designed for ease of use and reliability, with software-configurable gain and phantom power on each input channel, and a compact single-rack-space design that fits neatly into any setup. Achieve professional-grade signal processing and unparalleled control with the BSS BLU-100.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Architecture Signal Processor\u003c\/strong\u003e that is fully configurable using HiQnet™ Audio Architect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed I\/O Configuration\u003c\/strong\u003e with 12 analog inputs and 8 analog outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware-Configurable Gain and Phantom Power\u003c\/strong\u003e on each input for precise control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48-Channel BLU Link Digital Audio Bus\u003c\/strong\u003e for low-latency, fault-tolerant audio networking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-directional Locate Function\u003c\/strong\u003e for easy device identification and monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Control Integration\u003c\/strong\u003e with 12 control inputs and 6 logic outputs (GPIO), as well as RS-232.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb style=\"font-size: 1.1em;\"\u003eFront Panel LED Indicators\u003c\/b\u003e\n\u003cp style=\"margin-left: 1.3em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003ePer Input:\u003c\/strong\u003e Signal Present, CLIP, 48V (Input only)\u003c\/p\u003e\n\u003cp style=\"margin-left: 1.3em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eOther:\u003c\/strong\u003e COM, STAT, ERR, PWR\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"font-size: 1.1em;\"\u003eAnalog Inputs\u003c\/b\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ 12 electronically balanced on Phoenix Combicon removable screw connectors\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMic\/Line Inputs:\u003c\/strong\u003e Nominal gain 0dB, electronically switchable up to +48dB in +6dB steps\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 3.5kΩ\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e +20dBu with 0dB input gain, +8dBu with 12dB gain\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eCMRR:\u003c\/strong\u003e \u0026gt;75dB at 1KHz\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eInput Noise (E.I.N.):\u003c\/strong\u003e \u0026lt;-128dBu typical with 150Ω source\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003ePhantom Power:\u003c\/strong\u003e 48V nominal, selectable per input\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eA\/D Latency:\u003c\/strong\u003e 37\/Fs (\u0026lt;0.77ms@48k\u0026gt;)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"font-size: 1.1em;\"\u003eAnalog Outputs\u003c\/b\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ 8 electronically balanced on Phoenix\/Combicon removable screw connectors\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e +19dBu\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20Hz-20KHz (+0.5dB\/-1dB)\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eTHD:\u003c\/strong\u003e \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eDynamic Range:\u003c\/strong\u003e 108dB typical, 22Hz-22KHz unweighted\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eCrosstalk:\u003c\/strong\u003e \u0026lt;-75dB\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 40Ω balanced and 20Ω unbalanced\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eD\/A Latency:\u003c\/strong\u003e 29\/Fs (\u0026lt;0.60ms@48k\u0026gt;)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"font-size: 1.1em;\"\u003eBLU Link\u003c\/b\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eConnectors:\u003c\/strong\u003e 2 x RJ45 Ethernet connectors\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMaximum Cable Length:\u003c\/strong\u003e 100m\/300ft on Category 5e cable\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMax. Number of Nodes:\u003c\/strong\u003e 60\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eLatency:\u003c\/strong\u003e 11\/Fs (\u0026lt;0.23ms@48k\u0026gt;)\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003ePass Through Latency:\u003c\/strong\u003e 4\/Fs (\u0026lt;0.08ms@48k\u0026gt;)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb style=\"font-size: 1.1em;\"\u003ePower and Dimensions\u003c\/b\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 100-240V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003ePower Consumption:\u003c\/strong\u003e \u0026lt;55VA\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eBTU Rating:\u003c\/strong\u003e \u0026lt;188 BTU\/hr\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eOperating Temp. Range:\u003c\/strong\u003e 15 (59) to 35 (95) degrees C (degrees F)\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 1.75\" (1U) x 19\" x 9.0\" (45mm x 483mm x 229mm)\u003c\/p\u003e\n\u003cp style=\"margin-left: 1em; margin-top: .5em;\"\u003e▪ \u003cstrong\u003eWeight:\u003c\/strong\u003e 6.4 lbs \/ 2.9 kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Content\u003c\/h3\u003e\n\u003cp\u003ePackage content was not specified in the source documentation, but typically includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSS BLU-100\u003c\/strong\u003e Signal Processor.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower Cable.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUser Manual.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812807365,"sku":"BSS-SIGPRSS-BLU100","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/6533d32a-cbd8-436d-ae8d-fb24a4f617bc.jpg?v=1770831830"},{"product_id":"bss-blu-120-input-output-expander-with-blu-link","title":"BSS BLU-120 Input Output Expander with BLU Link","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-120 Input Output Expander with BLU Link\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-120 offers configurable I\/O and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e The BLU-120 is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e 12 Control Inputs and 6 Logic Outputs allow the BLU-120 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e The BLU-120 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eFour Input \/ Output Card Slots\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Inputs \/ Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAEC Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTelephone Hybrid Card\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eInformative Front Panel Display\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIntegration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e Per Input: Signal Present, CLIP, SYNC\/48V, I\/O card type (IN, OUT, DIG, AEC)\u003cbr\u003e Other: LCD Display, Data Activity\u003cbr\u003e \u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e Mic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e Input Impedance: 3.5kΩ\u003cbr\u003e Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e CMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e Input Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003e Phantom Power: 48V nominal, selectable per input\u003cbr\u003e A\/D Latency: 38.7\/Fs\u003cbr\u003e \u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Input Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e \u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Maximum Output Level: +19dBu\u003cbr\u003e Frequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e THD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e Dynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e Crosstalk: \u0026lt;-75dB\u003cbr\u003e D\/A Latency: 28\/Fs\u003cbr\u003e \u003cstrong\u003eDigital Outputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Output Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e \u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e Mains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e Power Consumption: \u0026lt;35VA\u003cbr\u003e BTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e Operating Temperature Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e Dimensions (H(U) x W x D): 1.75\" (1U) x 19\" x 12.5\"(45mm x 483mm x 318mm)\u003cbr\u003e Weight: 9 lbs \/ 4.1 kgs (estimated)\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812840133,"sku":"BSS-SIGPRSS-BLU120","price":3670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu120__61823.jpg?v=1706839148"},{"product_id":"bss-blu-102-conferencing-processor-with-aec-telephone-hybrid","title":"BSS BLU-102 Conferencing Processor with AEC Telephone Hybrid","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-102 Conferencing Processor with AEC Telephone Hybrid\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.\u003cbr\u003e The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e10 Analog Inputs (with 48v Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 Analog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRJ-11 Telephone Input\/Output Port\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e Per Input: Signal Present, CLIP, 48V (Input only)\u003cbr\u003e Other: COM, STAT, ERR, PWR\u003cbr\u003e \u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 10 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e Mic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e Input Impedance: 3.0kΩ\u003cbr\u003e Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e CMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e Input Noise (E.I.N.): \u0026lt;-125dBu typical with 150Ω source\u003cbr\u003e Phantom Power: 48V nominal, selectable per input\u003cbr\u003e A\/D Latency: 37\/Fs \u0026lt;0.77ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e 8 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Maximum Output Level: +19dBu\u003cbr\u003e Frequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e THD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e Dynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e Crosstalk: \u0026lt;-75dB\u003cbr\u003e Output Impedance: 40Ω balanced and 20Ω unbalanced\u003cbr\u003e D\/A Latency: 29\/Fs \u0026lt;0.60ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003eBLU link:\u003c\/strong\u003e\u003cbr\u003e Connectors: 2 x RJ45 Ethernet connectors\u003cbr\u003e Maximum Cable Length: 100m\/300ft on Category 5e cable between devices\u003cbr\u003e Max. Number of Nodes: 60\u003cbr\u003e Latency: 11\/Fs \u0026lt;0.23ms@48k\u0026gt;\u003cbr\u003e Pass Through Latency: 4\/Fs \u0026lt;0.08ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e Mains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e Power Consumption: \u0026lt;55VA\u003cbr\u003e BTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e Operating Temp. Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e Dims: (H(U) x W x D): 1.75” (45mm)(1U) x 19” (483mm) x 12.5” (318mm)\u003cbr\u003e Weight: 9.1 lbs \/ 4.1 kg\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812905669,"sku":"BSS-SIGPRSS-BLU102","price":4925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu102__36232.jpg?v=1706839156"},{"product_id":"bss-blu-103-conferencing-processor-with-aec-and-voip","title":"BSS BLU-103 Conferencing Processor with AEC and VoIP","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-103 Conferencing Processor with AEC and VoIP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-103 offers a fixed configuration of 8 analog inputs and 8 analog outputs, a Voice over IP (VoIP) interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e The VoIP port enables the BLU-103 to interface with two VoIP (SIP v2.0 or later) lines.\u003cbr\u003e The BLU-103 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e The BLU-103 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e8 Analog Inputs (with 48v Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 Analog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eVoIP Port\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet Audio Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eChasis 19” (single rack space)\u003cbr\u003e Custom I\/O (card based) no\u003cbr\u003e Analog Inputs 8\u003cbr\u003e Digital Inputs 0\u003cbr\u003e AEC Inputs 8\u003cbr\u003e Analog Outputs 8\u003cbr\u003e Digital Ouputs 0\u003cbr\u003e VolP Connection 1\u003cbr\u003e Max Inputs\/Outputs fixed\u003cbr\u003e Config software\u003cbr\u003e LCD Display no\u003cbr\u003e Logic Processing yes\u003cbr\u003e RS-232 yes\u003cbr\u003e GPIO yes\u003cbr\u003e Signal Processing (MHz) 400\u003cbr\u003e Cobranet no\u003cbr\u003e SWL Digital Audio Bus 48\u003cbr\u003e AVB no\u003cbr\u003e Dante no\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510813036741,"sku":"BSS-SIGPRSS-BLU103","price":4810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu103__73072.jpg?v=1706839152"},{"product_id":"bss-blu-101-conferencing-processor-with-aec","title":"BSS BLU-101 Conferencing Processor with AEC","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-101 Conferencing Processor with AEC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.\u003cbr\u003e The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel dig ital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.\u003cbr\u003e The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e12 Analog Inputs (with 48v Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e8 Analog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Signal Processing\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Processing and Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003cbr\u003e Clear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System Integration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e Per Input: Signal Present, CLIP, 48V (Input only)\u003cbr\u003e Other: COM, STAT, ERR, PWR\u003cbr\u003e \u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 12 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e Mic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e Input Impedance: 3.0kΩ\u003cbr\u003e Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e CMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e Input Noise (E.I.N.): \u0026lt;-125dBu typical with 150Ω source\u003cbr\u003e Phantom Power: 48V nominal, selectable per input\u003cbr\u003e A\/D Latency: 37\/Fs \u0026lt;0.77ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e 8 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Maximum Output Level: +19dBu\u003cbr\u003e Frequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e THD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e Dynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e Crosstalk: \u0026lt;-75dB\u003cbr\u003e Output Impedance: 40Ω balanced and 20Ω unbalanced\u003cbr\u003e D\/A Latency: 29\/Fs \u0026lt;0.60ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003eBLU link:\u003c\/strong\u003e\u003cbr\u003e Connectors: 2 x RJ45 Ethernet connectors\u003cbr\u003e Maximum Cable Length: 100m\/300ft on Category 5e cable between devices\u003cbr\u003e Max. Number of Nodes: 60\u003cbr\u003e Latency: 11\/Fs \u0026lt;0.23ms@48k\u0026gt;\u003cbr\u003e Pass Through Latency: 4\/Fs \u0026lt;0.08ms@48k\u0026gt;\u003cbr\u003e \u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e Mains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e Power Consumption: \u0026lt;55VA\u003cbr\u003e BTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e Operating Temp. Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e Dims: (H(U) x W x D): 1.75” (45mm)(1U) x 19” (483mm) x 12.5” (318mm)\u003cbr\u003e Weight: 9.1 lbs \/ 4.1 kg\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510813298885,"sku":"BSS-SIGPRSS-BLU101","price":4820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu101__06309.jpg?v=1706839149"},{"product_id":"bss-blu-dan-256-channel-low-latency-half-rack-dante-blu-link-bridge-signal-processor","title":"BSS BLU-DAN 256 Channel Low Latency Half Rack Dante BLU Link Bridge Signal Processor","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-DAN 256 Channel Low Latency Half Rack Dante BLU Link Bridge Signal Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to add Dante to one or more BLU link devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe BLU-DAN is configurable through HiQnet Audio Architect. A rich palette of logic objects and a drag and drop method of configuration provide a simple and familiar design environment.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe BLU-DAN features Dante audio. The BLU-DAN is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe BLU-DAN also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eDante Audio\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBLU link - 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAdd Dante to one or more BLU link devices\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet Audio Architect\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e1RU, Half-Rack Device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eChassis:\u003cbr\u003e Half rack (single space, half-width)\u003cbr\u003e Dante:\u003cbr\u003e yes\u003cbr\u003e SWL Digital Audio Bus:\u003cbr\u003e 256\u003cbr\u003e RS-232:\u003cbr\u003e Yes\u003cbr\u003e Dimensions H(U) x W x D:\u003cbr\u003e 1.75 Inches (1U) x 8.625 Inches x 13.5 Inches\u003cbr\u003e Weight:\u003cbr\u003e 5.3 lbs\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510815199429,"sku":"BSS-SIGPRSS-BLUDAN","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/7a7d6bc8-bee0-4aaa-a428-80a2119fa124.jpg?v=1737062242"},{"product_id":"dbx-zc-4-program-selector-with-contact-closure-for-driverack-and-zonepro","title":"DBX ZC-4 Program Selector with Contact Closure for DriveRack and ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-4 Program Selector with Contact Closure for DriveRack and ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. \u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall also provide contact closure programmable source selection, page assignment, or scene selection for the dbx ZonePRO devices. \u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-4 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815428805,"sku":"DBX-CNTLR-ZC4","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/21371918-8dc2-4e75-a52f-87ede87b2dce.jpg?v=1737072018"},{"product_id":"dbx-zonepro-640m-6x4-digital-zone-processor","title":"DBX ZonePro 640m 6x4 Digital Zone Processor","description":"\u003cp\u003e\u003cstrong\u003eDBX ZonePro 640m 6x4 Digital Zone Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZonePRO 640m offers fixed I\/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe 640m features a total of six inputs and four outputs. Inputs include four balanced mic\/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe 640m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eA link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAdditional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).\u003c\/p\u003e\n\u003cp class=\"description\"\u003eZonePRO Designerthe configuration, control and monitoring software for the ZonePRO family of devicesoffers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e6 Inputs \/ 4 Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e4 Balanced Mic\/Line Inputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e2 Unbalanced, Mono-Summed RCA Input Pairs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eMicrophone Gain per Channel\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003ePre-Configured Architecture\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTwo Configurable Input Insert Positions\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOne Configurable Output Insert Position\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAutoWarmth per Output Zone\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLink Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eComprehensive Signal Metering\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eFront Panel LCD\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eUser-Specified Front Panel Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOptional ZC Controllers\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEthernet Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSerial Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThird Party Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWizard-Driven Configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eIndicators          \u003c\/strong\u003e\u003cbr\u003e\n4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters\u003cbr\u003e\n\u003cstrong\u003eLCD Display       \u003c\/strong\u003e\u003cbr\u003e\nLCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute\u003cbr\u003e\n\u003cstrong\u003eInput    \u003c\/strong\u003e\u003cbr\u003e\n6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs\u003cbr\u003e\n\u003cstrong\u003eInput Connectors           \u003c\/strong\u003e\u003cbr\u003e\nEuroblock (Line and Mic) RCA (Source)\u003cbr\u003e\n\u003cstrong\u003eInput Type         \u003c\/strong\u003e\u003cbr\u003e\nElectronically balanced\/RF-filtered\u003cbr\u003e\n\u003cstrong\u003eInput Impedance           \u003c\/strong\u003e\u003cbr\u003e\nEuroblock: \u0026gt;50k Balanced, \u0026gt;25k Unbalanced, RF Filtered; RCA: \u0026gt;25k Unbalanced, RF Filtered\u003cbr\u003e\n\u003cstrong\u003eMax Input         \u003c\/strong\u003e\u003cbr\u003e\n+20dBu Mic\/Line, +12dBu RCA\u003cbr\u003e\n\u003cstrong\u003eCMRR   \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;40dB, typically \u0026gt;55dB @ 1 kHz\u003cbr\u003e\n\u003cstrong\u003eMic Preamp gain            \u003c\/strong\u003e\u003cbr\u003e\n30 to 60dB\u003cbr\u003e\n\u003cstrong\u003eMic Preamp Equivalent Input Noise (EIN)           \u003c\/strong\u003e\u003cbr\u003e\n\u0026lt; -118dBu, 22Hz-22kHz, 150 Source Impedance\u003cbr\u003e\n\u003cstrong\u003eMic Preamp Phantom Power    \u003c\/strong\u003e\u003cbr\u003e\n+15VDC\u003cbr\u003e\n\u003cstrong\u003eOutput               \u003c\/strong\u003e\u003cbr\u003e\n4 total\u003cbr\u003e\n\u003cstrong\u003eOutput Connectors        \u003c\/strong\u003e\u003cbr\u003e\nEuroblock\u003cbr\u003e\n\u003cstrong\u003eOutput Type     \u003c\/strong\u003e\u003cbr\u003e\nElectronically Balanced, RF Filtered\u003cbr\u003e\n\u003cstrong\u003eOutput Impedance        \u003c\/strong\u003e\u003cbr\u003e\n120 Balanced, 60 Unbalanced\u003cbr\u003e\n\u003cstrong\u003eMax Output      \u003c\/strong\u003e\u003cbr\u003e\n+20dBu\u003cbr\u003e\n\u003cstrong\u003eA\/D Converter \u003c\/strong\u003e\u003cbr\u003e\ndbx Type IV conversion system\u003cbr\u003e\n\u003cstrong\u003eA\/D Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e\n(line) \u0026gt;113 dB, A-weighted, \u0026gt;110 dB unweighted\u003cbr\u003e\n\u003cstrong\u003eType IV Dynamic Range              \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;119dB, A-weighted, 22kHz; BW: \u0026gt;117dB, unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eDigital Output Dynamic Range \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;114 dB A-weighted, 110dB unweighted\u003cbr\u003e\n\u003cstrong\u003eSample Rate     \u003c\/strong\u003e\u003cbr\u003e\n48kHz\u003cbr\u003e\n\u003cstrong\u003eD\/A Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e\n112 dB A-weighted, 109dB unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eDynamic Range              \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;109 dB A-weighted, \u0026gt;106 dB unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eTHD+Noise        \u003c\/strong\u003e\u003cbr\u003e\n0.003% typical at +4dBu, 1kHz, 0dB gain\u003cbr\u003e\n\u003cstrong\u003eFrequency Response     \u003c\/strong\u003e\u003cbr\u003e\n20Hz - 20kHz, +\/-0.5dB\u003cbr\u003e\n\u003cstrong\u003eInterchannel Crosstalk \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;80dB typical\u003cbr\u003e\n\u003cstrong\u003ePropagation Delay         \u003c\/strong\u003e\u003cbr\u003e\n0.6 msec\u003cbr\u003e\n\u003cstrong\u003eOperating Voltage         \u003c\/strong\u003e\u003cbr\u003e\n100VAC 50\/60Hz, 120VAC 60Hz and 230VAC 50\/60Hz\u003cbr\u003e\n\u003cstrong\u003ePower Consumption     \u003c\/strong\u003e\u003cbr\u003e\n29 W\u003cbr\u003e\n\u003cstrong\u003eBTU       \u003c\/strong\u003e\u003cbr\u003e\n\u0026lt;92.13\u003cbr\u003e\n\u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e\nUL 600065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815461573,"sku":"DBX-ZONEPRO640M-DBX640MV","price":1100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/2107c407-69f1-4c67-8a79-88906c3a69db.jpg?v=1737072135"},{"product_id":"dbx-zc-2-rotary-volume-control-with-mute-function-for-driverack-and-zonepro","title":"DBX ZC-2 Rotary Volume Control with Mute Function for DriveRack and ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-2 Rotary Volume Control with Mute Function for DriveRack and ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and ZonePRO products.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide computer programmable rotary potentiometer and push-button volume control and muting for the dbx DriveRack 260, 220i and ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-2 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e\n(2) RJ-45\u003cbr\u003e\n\u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e\nMaximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e\n\u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e\nUp to Six Zone Controllers: 1000 ft.\u003cbr\u003e\n\u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e\nCAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e\n\u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e\nUL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815494341,"sku":"DBX-CNTLR-ZC2","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1zc2__89461.jpg?v=1706839226"},{"product_id":"dbx-zc-7-page-assignment-controller-for-zonepro","title":"DBX ZC-7 Page Assignment Controller for ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-7 Page Assignment Controller for ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-7 is a programmable push -to-talk page assignment controller for the ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide computer programmable push-button up\/down volume control for the dbx ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-7 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815527109,"sku":"DBX-CNTLR-ZC7","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1zc7__76814.jpg?v=1706839214"},{"product_id":"dbx-zonepro-1261-12x6-digital-zone-processor-without-front-panel-control","title":"DBX ZonePro 1261 12x6 Digital Zone Processor without Front-Panel Control","description":"\u003cp\u003e\u003cstrong\u003eDBX ZonePro 1261 12x6 Digital Zone Processor without Front-Panel Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eWith 12 inputs and 6 outputs and Ethernet control the dbx ZonePRO 1261 is the newest members of the ZonePRO family providing a complete suite of signal processing and control for Commercial Audio applications.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eDesigned to offer superior system sonic performance and flexibility, the 1261\/1261 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1261 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eBeyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZonePRO 1261 will take your Commercial Audio system to the next level with advanced processing, versatility and control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eAdvanced Feedback Suppression (AFS)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAutowarmth\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAuto Gain Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eCompression\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLimiting\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNoise Gating\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNotch Filtering\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBandpass and Crossover Filters\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eParametric EQ\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSecurity Lockout\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWall Panel Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRS-232 Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIEC, UL and CSA Approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003e 12 Total (2) Switchable mic or line, (8) RCA, and (1) S\/PDIF\u003cbr\u003e \u003cstrong\u003eInput Connectors           \u003c\/strong\u003e\u003cbr\u003e Euroblock (Line and Mic) RCA (Source)\u003cbr\u003e \u003cstrong\u003eInput Impedance           \u003c\/strong\u003e\u003cbr\u003e Euroblock \u0026gt; 50k Balanced, \u0026gt;25k Unbalanced, RF Filtered; RCA \u0026gt;25k Unbalanced, RF Filtered\u003cbr\u003e \u003cstrong\u003eMax Input         \u003c\/strong\u003e\u003cbr\u003e +20dBu Mic\/Line, +12dBu RCA\u003cbr\u003e \u003cstrong\u003eCMRR   \u003c\/strong\u003e\u003cbr\u003e \u0026gt; 40dB, typically \u0026gt;55db @ 1kHz\u003cbr\u003e \u003cstrong\u003eMic Preamp gain            \u003c\/strong\u003e\u003cbr\u003e 30 to 60dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Equivalent Input Noise (EIN)           \u003c\/strong\u003e\u003cbr\u003e \u0026lt;-118dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Phantom Power    \u003c\/strong\u003e\u003cbr\u003e 15V\u003cbr\u003e \u003cstrong\u003eOutput               \u003c\/strong\u003e\u003cbr\u003e 6 Analog\u003cbr\u003e \u003cstrong\u003eOutput Connectors        \u003c\/strong\u003e\u003cbr\u003e Euroblock\u003cbr\u003e \u003cstrong\u003eOutput Type     \u003c\/strong\u003e\u003cbr\u003e Electronically balanced, RF filtered\u003cbr\u003e \u003cstrong\u003eOutput Impedance        \u003c\/strong\u003e\u003cbr\u003e 120 ohms balanced, 60ohm unbalanced\u003cbr\u003e \u003cstrong\u003eMax Output      \u003c\/strong\u003e\u003cbr\u003e +20dBu\u003cbr\u003e \u003cstrong\u003eA\/D Converter \u003c\/strong\u003e\u003cbr\u003e dbx Type IV conversion system\u003cbr\u003e \u003cstrong\u003eA\/D Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e (line) \u0026gt;113 dB, A-weighted, \u0026gt;110 dB unweighted\u003cbr\u003e \u003cstrong\u003eType IV Dynamic Range \u003c\/strong\u003e\u003cbr\u003e \u0026gt;119 dB, A-weighted, 22kHz BW; \u0026gt;117 dB, A-weighted, 22kHz BW\u003cbr\u003e \u003cstrong\u003eSample Rate     \u003c\/strong\u003e\u003cbr\u003e 48kHz\u003cbr\u003e \u003cstrong\u003eD\/A Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e 112 dB A-weighted, 109dB unweighted\u003cbr\u003e \u003cstrong\u003eDynamic Range              \u003c\/strong\u003e\u003cbr\u003e \u0026gt;110 dB A-weighted, \u0026gt;107dB unweighted\u003cbr\u003e \u003cstrong\u003eTHD+Noise        \u003c\/strong\u003e\u003cbr\u003e 0.003% typical at +4dBu, 1kHz, 0dB gain\u003cbr\u003e \u003cstrong\u003eFrequency Response     \u003c\/strong\u003e\u003cbr\u003e 20Hz - 20kHz, +\/-0.5dB\u003cbr\u003e \u003cstrong\u003eInterchannel Crosstalk \u003c\/strong\u003e\u003cbr\u003e \u0026gt;80dB typical\u003cbr\u003e \u003cstrong\u003ePropagation Delay         \u003c\/strong\u003e\u003cbr\u003e 0.6 msec\u003cbr\u003e \u003cstrong\u003eOperating Voltage         \u003c\/strong\u003e\u003cbr\u003e 100-240 VAC, 50\/60Hz\u003cbr\u003e \u003cstrong\u003ePower Consumption     \u003c\/strong\u003e\u003cbr\u003e 27 W\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, E 60065, EN 55013\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815690949,"sku":"DBX-SIGPRSS-ZONEPRO1261","price":1185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1zonepro1261__07882.jpg?v=1706839221"},{"product_id":"dbx-zonepro-641-6x4-digital-zone-processor-without-front-panel-control","title":"DBX ZonePro 641 6x4 Digital Zone Processor without Front-Panel Control","description":"\u003cp\u003e\u003cstrong\u003eDBX ZonePro 641 6x4 Digital Zone Processor without Front-Panel Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eWith 6 inputs and 4 outputs the dbx ZonePRO 641 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eDesigned to offer superior system sonic performance and flexibility, the 641\/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 641 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eBeyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZonePRO 641 will take your Commercial Audio system to the next level with advanced processing, versatility and control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eAdvanced Feedback Suppression (AFS)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAutowarmth\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAuto Gain Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eCompression\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLimiting\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNoise Gating\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNotch Filtering\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBandpass and Crossover Filters\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eParametric EQ\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSecurity Lockout\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWall Panel Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRS-232 Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWindows 2000 and XP GUI\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIEC, UL and CSA Approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eInput    \u003c\/strong\u003e\u003cbr\u003e (6 total) (2) Switchable line or mic inputs (4) RCA Source\u003cbr\u003e \u003cstrong\u003eInput Connectors           \u003c\/strong\u003e\u003cbr\u003e Euroblock (Line and Mic) RCA (Source)\u003cbr\u003e \u003cstrong\u003eInput Type         \u003c\/strong\u003e\u003cbr\u003e Electronically balanced\/RF-filtered\u003cbr\u003e \u003cstrong\u003eInput Impedance           \u003c\/strong\u003e\u003cbr\u003e 50k ohm balanced, \u0026gt;75k ohm unbalanced\u003cbr\u003e \u003cstrong\u003eMax Input         \u003c\/strong\u003e\u003cbr\u003e +20dBu Mic\/Line, +12dBu RCA\u003cbr\u003e \u003cstrong\u003eCMRR   \u003c\/strong\u003e\u003cbr\u003e \u0026gt;40dB, typically \u0026gt;55dB @ 1 kHz\u003cbr\u003e \u003cstrong\u003eMic Preamp gain            \u003c\/strong\u003e\u003cbr\u003e 30 to 60dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Equivalent Input Noise (EIN)           \u003c\/strong\u003e\u003cbr\u003e \u0026lt;-118dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Phantom Power    \u003c\/strong\u003e\u003cbr\u003e 15V\u003cbr\u003e \u003cstrong\u003eOutput               \u003c\/strong\u003e\u003cbr\u003e 4 total\u003cbr\u003e \u003cstrong\u003eOutput Connectors        \u003c\/strong\u003e\u003cbr\u003e Euroblock\u003cbr\u003e \u003cstrong\u003eOutput Type     \u003c\/strong\u003e\u003cbr\u003e Electronically Balanced, RF Filtered\u003cbr\u003e \u003cstrong\u003eOutput Impedance        \u003c\/strong\u003e\u003cbr\u003e 120 ohms balanced, 60ohm unbalanced\u003cbr\u003e \u003cstrong\u003eMax Output      \u003c\/strong\u003e\u003cbr\u003e +20dBu\u003cbr\u003e \u003cstrong\u003eA\/D Converter \u003c\/strong\u003e\u003cbr\u003e dbx Type IV conversion system\u003cbr\u003e \u003cstrong\u003eA\/D Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e (line) \u0026gt;113 dB, A-weighted, \u0026gt;110 dB unweighted\u003cbr\u003e \u003cstrong\u003eType IV Dynamic Range              \u003c\/strong\u003e\u003cbr\u003e \u0026gt;119dB, A-weighted, 22kHz; BW: \u0026gt;117dB, unweighted, 22kHz BW\u003cbr\u003e \u003cstrong\u003eDigital Output   \u003c\/strong\u003e\u003cbr\u003e RCA 24-Bit oversampling\u003cbr\u003e \u003cstrong\u003eDigital Output Dynamic Range \u003c\/strong\u003e\u003cbr\u003e \u0026gt;114 dB A-weighted, 110dB unweighted\u003cbr\u003e \u003cstrong\u003eSample Rate     \u003c\/strong\u003e\u003cbr\u003e 48kHz\u003cbr\u003e \u003cstrong\u003eD\/A Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e 112 dB A-weighted, 109dB unweighted\u003cbr\u003e \u003cstrong\u003eDynamic Range              \u003c\/strong\u003e\u003cbr\u003e \u0026gt;109 dB A-weighted, \u0026gt;106 dB unweighted\u003cbr\u003e \u003cstrong\u003eTHD+Noise        \u003c\/strong\u003e\u003cbr\u003e 0.003% typical at +4dBu, 1kHz, 0dB gain\u003cbr\u003e \u003cstrong\u003eFrequency Response     \u003c\/strong\u003e\u003cbr\u003e 20Hz - 20kHz, +\/-0.5dB\u003cbr\u003e \u003cstrong\u003eInterchannel Crosstalk \u003c\/strong\u003e\u003cbr\u003e \u0026gt;80dB typical\u003cbr\u003e \u003cstrong\u003ePropagation Delay         \u003c\/strong\u003e\u003cbr\u003e 0.6 msec\u003cbr\u003e \u003cstrong\u003eOperating Voltage         \u003c\/strong\u003e\u003cbr\u003e 100VAC 50\/60Hz, 120VAC 60Hz and 230VAC 50\/60Hz\u003cbr\u003e \u003cstrong\u003ePower Consumption     \u003c\/strong\u003e\u003cbr\u003e 29 W\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 600065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815756485,"sku":"DBX-SIGPRSS-ZONEPRO641","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1zonepro641__75029.jpg?v=1706839205"},{"product_id":"dbx-zc-6-push-button-volume-control-for-zonepro","title":"DBX ZC-6 Push-Button Volume Control for ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-6 Push-Button Volume Control for ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-6 is a programmable volume control for ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide computer programmable push-button up\/down volume control for the dbx ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-6 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815789253,"sku":"DBX-CNTLR-ZC6","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/f7a7c15f-7157-4709-9438-8270a0d8053f.jpg?v=1737072023"},{"product_id":"dbx-zonepro-641m-6x4-digital-zone-processor","title":"DBX ZonePro 641m 6x4 Digital Zone Processor","description":"\u003cp\u003e\u003cstrong\u003eDBX ZonePro 641m 6x4 Digital Zone Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZonePRO 641m offers fixed I\/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe 641m features a total of six inputs and four outputs. Inputs include four balanced mic\/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eA link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAdditional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designerthe configuration, control and monitoring software for the ZonePRO family of devicesoffers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003e6 Inputs \/ 4 Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e4 Balanced Mic\/Line Inputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e2 Unbalanced, Mono-Summed RCA Input Pairs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eMicrophone Gain per Channel\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003ePre-Configured Architecture\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTwo Configurable Input Insert Positions\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOne Configurable Output Insert Position\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAutoWarmth per Output Zone\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLink Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOptional ZC Controllers\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEthernet Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSerial Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThird Party Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWizard-Driven Configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eIndicators          \u003c\/strong\u003e\u003cbr\u003e\nNetwork Traffic, Power\u003cbr\u003e\n\u003cstrong\u003eInput    \u003c\/strong\u003e\u003cbr\u003e\n6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs\u003cbr\u003e\n\u003cstrong\u003eInput Connectors           \u003c\/strong\u003e\u003cbr\u003e\nEuroblock (Line and Mic) RCA (Source)\u003cbr\u003e\n\u003cstrong\u003eInput Type         \u003c\/strong\u003e\u003cbr\u003e\nElectronically balanced\/RF-filtered\u003cbr\u003e\n\u003cstrong\u003eInput Impedance           \u003c\/strong\u003e\u003cbr\u003e\nEuroblock: \u0026gt;50k Balanced, \u0026gt;25k Unbalanced, RF Filtered; RCA: \u0026gt;25k Unbalanced, RF Filtered\u003cbr\u003e\n\u003cstrong\u003eMax Input         \u003c\/strong\u003e\u003cbr\u003e\n+20dBu Mic\/Line, +12dBu RCA\u003cbr\u003e\n\u003cstrong\u003eCMRR   \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;40dB, typically \u0026gt;55dB @ 1 kHz\u003cbr\u003e\n\u003cstrong\u003eMic Preamp gain            \u003c\/strong\u003e\u003cbr\u003e\n30 to 60dB\u003cbr\u003e\n\u003cstrong\u003eMic Preamp Equivalent Input Noise (EIN)           \u003c\/strong\u003e\u003cbr\u003e\n\u0026lt; -118dBu, 22Hz-22kHz, 150 Source Impedance\u003cbr\u003e\n\u003cstrong\u003eMic Preamp Phantom Power    \u003c\/strong\u003e\u003cbr\u003e\n+15VDC\u003cbr\u003e\n\u003cstrong\u003eOutput               \u003c\/strong\u003e\u003cbr\u003e\n4 total\u003cbr\u003e\n\u003cstrong\u003eOutput Connectors        \u003c\/strong\u003e\u003cbr\u003e\nEuroblock\u003cbr\u003e\n\u003cstrong\u003eOutput Type     \u003c\/strong\u003e\u003cbr\u003e\nElectronically Balanced, RF Filtered\u003cbr\u003e\n\u003cstrong\u003eOutput Impedance        \u003c\/strong\u003e\u003cbr\u003e\n120 Balanced, 60 Unbalanced\u003cbr\u003e\n\u003cstrong\u003eMax Output      \u003c\/strong\u003e\u003cbr\u003e\n+20dBu\u003cbr\u003e\n\u003cstrong\u003eA\/D Converter \u003c\/strong\u003e\u003cbr\u003e\ndbx Type IV conversion system\u003cbr\u003e\n\u003cstrong\u003eA\/D Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e\n(line) \u0026gt;113 dB, A-weighted, \u0026gt;110 dB unweighted\u003cbr\u003e\n\u003cstrong\u003eType IV Dynamic Range              \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;119dB, A-weighted, 22kHz; BW: \u0026gt;117dB, unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eDigital Output Dynamic Range \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;114 dB A-weighted, 110dB unweighted\u003cbr\u003e\n\u003cstrong\u003eSample Rate     \u003c\/strong\u003e\u003cbr\u003e\n48kHz\u003cbr\u003e\n\u003cstrong\u003eD\/A Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e\n112 dB A-weighted, 109dB unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eDynamic Range              \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;109 dB A-weighted, \u0026gt;106 dB unweighted, 22kHz BW\u003cbr\u003e\n\u003cstrong\u003eTHD+Noise        \u003c\/strong\u003e\u003cbr\u003e\n0.003% typical at +4dBu, 1kHz, 0dB gain\u003cbr\u003e\n\u003cstrong\u003eFrequency Response     \u003c\/strong\u003e\u003cbr\u003e\n20Hz - 20kHz, +\/-0.5dB\u003cbr\u003e\n\u003cstrong\u003eInterchannel Crosstalk \u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;80dB typical\u003cbr\u003e\n\u003cstrong\u003ePropagation Delay         \u003c\/strong\u003e\u003cbr\u003e\n0.6 msec\u003cbr\u003e\n\u003cstrong\u003eOperating Voltage         \u003c\/strong\u003e\u003cbr\u003e\n100VAC 50\/60Hz, 120VAC 60Hz and 230VAC 50\/60Hz\u003cbr\u003e\n\u003cstrong\u003ePower Consumption     \u003c\/strong\u003e\u003cbr\u003e\n29 W\u003cbr\u003e\n\u003cstrong\u003eBTU       \u003c\/strong\u003e\u003cbr\u003e\n\u0026lt;92.13\u003cbr\u003e\n\u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e\nUL 600065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815822021,"sku":"DBX-SIGPRSS-ZONEPRO641M","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/dea2eef5-3c9b-4fa4-a978-8902e5bc5169.jpg?v=1737072116"},{"product_id":"dbx-zc-8-source-selector-and-volume-control-for-zonepro","title":"DBX ZC-8 Source Selector and Volume Control for ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-8 Source Selector and Volume Control for ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-8 provides both programmable source selection and volume control to ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide computer programmable push-button up\/down volume control for the dbx ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-8 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815920325,"sku":"DBX-CNTLR-ZC8","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/5c9f3c5e-4d5a-4d69-b2f8-fb116eb07171.jpg?v=1737072027"},{"product_id":"dbx-zc-1-rotary-volume-control-for-driverack-and-zonepro","title":"DBX ZC-1 Rotary Volume Control for DriveRack and ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-1 Rotary Volume Control for DriveRack and ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eProvide computer programmable rotary potentiometer volume control for the dbx DriveRack 260, 220i and ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHave DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-1 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e\n(2) RJ-45\u003cbr\u003e\n\u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e\nMaximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e\n\u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e\nUp to Six Zone Controllers: 1000 ft.\u003cbr\u003e\n\u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e\nCAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e\n\u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e\nUL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510815985861,"sku":"DBX-CNTLR-ZC1","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/980beb61-5f00-4ce5-a36b-6487ce3e22ed.jpg?v=1737072014"},{"product_id":"dbx-zc-bob-breakout-box-for-driverack-and-zonepro","title":"DBX ZC-BOB Breakout Box for DriveRack and ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-BOB Breakout Box for DriveRack and ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ -45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-BOB allows “home run” or parallel wiring to the DriveRack and ZonePRO devices.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide up to 6 RJ-45 input jacks for “Home Run” or parallel wiring configurations of the dbx ZC wall panel controllers, and one output RJ-45 jack for connection to the dbx DriveRack or ZonePRO device.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-BOB remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510816018629,"sku":"DBX-ACC-ZCBOB","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/3a15ac68-8440-47e9-a59d-5b90e3672d71.jpg?v=1737072009"},{"product_id":"dbx-zc-9-8-position-rotary-source-selector-for-zonepro","title":"DBX ZC-9 8-Position Rotary Source Selector for ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-9 8-Position Rotary Source Selector for ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide computer programmable push-button up\/down volume control for the dbx ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe device shall be a dbx ZC-9 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510816182469,"sku":"DBX-CNTLR-ZC9","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/fa637303-ccc9-4c98-b8ce-bd3b5e7dfc77.jpg?v=1737072031"},{"product_id":"dbx-zc-3-program-source-selector-for-driverack-and-zonepro","title":"DBX ZC-3 Program\/Source Selector for DriveRack and ZonePro","description":"\u003cp\u003e\u003cstrong\u003eDBX ZC-3 Program\/Source Selector for DriveRack and ZonePro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eAll information is subject to change without notice.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall provide programmable rotary switch program selection for the dbx DriveRack 220i and 260 devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall also provide rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePRO devices.\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eThe remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-3 remote controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eConnectors        \u003c\/strong\u003e\u003cbr\u003e (2) RJ-45\u003cbr\u003e \u003cstrong\u003eSeries Wiring    \u003c\/strong\u003e\u003cbr\u003e Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring using ZC-BOB     \u003c\/strong\u003e\u003cbr\u003e Up to Six Zone Controllers: 1000 ft.\u003cbr\u003e \u003cstrong\u003eParallel Wiring Cable     \u003c\/strong\u003e\u003cbr\u003e CAT5 or CAT5E with 28.6 Ohm\/M (Ohm\/1000ft.) nominal DCR and rated VW-1 or higher.\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 60065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510816313541,"sku":"DBX-CNTLR-ZC3","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1zc3__46631.jpg?v=1706839216"},{"product_id":"dbx-zonepro-640-6x4-digital-zone-processor-without-front-panel-control","title":"DBX ZonePro 640 6x4 Digital Zone Processor without Front-Panel Control","description":"\u003cp\u003e\u003cstrong\u003eDBX ZonePro 640 6x4 Digital Zone Processor without Front-Panel Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eWith 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eDesigned to offer superior system sonic performance and flexibility, the 640\/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eBeyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.\u003c\/p\u003e\n\u003cp class=\"description\"\u003eRecommended for: Installed.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eAdvanced Feedback Suppression (AFS)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAutowarmth\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAuto Gain Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eCompression\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLimiting\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNoise Gating\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNotch Filtering\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBandpass and Crossover Filters\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eParametric EQ\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSecurity Lockout\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWall Panel Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRS-232 Control\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eWindows 2000 and XP GUI\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIEC, UL and CSA Approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eInput \u003c\/strong\u003e\u003cbr\u003e (6 total) (2) Switchable line or mic inputs (4) RCA Source\u003cbr\u003e \u003cstrong\u003eInput Connectors\u003c\/strong\u003e\u003cbr\u003e Euroblock (Line and Mic) RCA (Source)\u003cbr\u003e \u003cstrong\u003eInput Type\u003c\/strong\u003e\u003cbr\u003e Electronically balanced\/RF-filtered\u003cbr\u003e \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e 50k ohm balanced, \u0026gt;75k ohm unbalanced\u003cbr\u003e \u003cstrong\u003eMax Input \u003c\/strong\u003e\u003cbr\u003e +20dBu Mic\/Line, +12dBu RCA\u003cbr\u003e \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e \u0026gt;40dB, typically \u0026gt;55dB @ 1 kHz\u003cbr\u003e \u003cstrong\u003eMic Preamp gain \u003c\/strong\u003e\u003cbr\u003e 30 to 60dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Equivalent Input Noise (EIN)           \u003c\/strong\u003e\u003cbr\u003e \u0026lt;-118dB\u003cbr\u003e \u003cstrong\u003eMic Preamp Phantom Power    \u003c\/strong\u003e\u003cbr\u003e 15V\u003cbr\u003e \u003cstrong\u003eOutput \u003c\/strong\u003e\u003cbr\u003e 4 total\u003cbr\u003e \u003cstrong\u003eOutput Connectors \u003c\/strong\u003e\u003cbr\u003e Euroblock\u003cbr\u003e \u003cstrong\u003eOutput Type     \u003c\/strong\u003e\u003cbr\u003e Electronically Balanced, RF Filtered\u003cbr\u003e \u003cstrong\u003eOutput Impedance        \u003c\/strong\u003e\u003cbr\u003e 120 ohms balanced, 60ohm unbalanced\u003cbr\u003e \u003cstrong\u003eMax Output      \u003c\/strong\u003e\u003cbr\u003e +20dBu\u003cbr\u003e \u003cstrong\u003eA\/D Converter \u003c\/strong\u003e\u003cbr\u003e dbx Type IV conversion system\u003cbr\u003e \u003cstrong\u003eA\/D Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e (line) \u0026gt;113 dB, A-weighted, \u0026gt;110 dB unweighted\u003cbr\u003e \u003cstrong\u003eType IV Dynamic Range              \u003c\/strong\u003e\u003cbr\u003e \u0026gt;119dB, A-weighted, 22kHz; BW: \u0026gt;117dB, unweighted, 22kHz BW\u003cbr\u003e \u003cstrong\u003eDigital Output   \u003c\/strong\u003e\u003cbr\u003e RCA 24-Bit oversampling\u003cbr\u003e \u003cstrong\u003eDigital Output Dynamic Range \u003c\/strong\u003e\u003cbr\u003e \u0026gt;114 dB A-weighted, 110dB unweighted\u003cbr\u003e \u003cstrong\u003eSample Rate     \u003c\/strong\u003e\u003cbr\u003e 48kHz\u003cbr\u003e \u003cstrong\u003eD\/A Dynamic Range      \u003c\/strong\u003e\u003cbr\u003e 112 dB A-weighted, 109dB unweighted\u003cbr\u003e \u003cstrong\u003eDynamic Range              \u003c\/strong\u003e\u003cbr\u003e \u0026gt;109 dB A-weighted, \u0026gt;106 dB unweighted\u003cbr\u003e \u003cstrong\u003eTHD+Noise        \u003c\/strong\u003e\u003cbr\u003e 0.003% typical at +4dBu, 1kHz, 0dB gain\u003cbr\u003e \u003cstrong\u003eFrequency Response     \u003c\/strong\u003e\u003cbr\u003e 20Hz - 20kHz, +\/-0.5dB\u003cbr\u003e \u003cstrong\u003eInterchannel Crosstalk \u003c\/strong\u003e\u003cbr\u003e \u0026gt;80dB typical\u003cbr\u003e \u003cstrong\u003ePropagation Delay         \u003c\/strong\u003e\u003cbr\u003e 0.6 msec\u003cbr\u003e \u003cstrong\u003eOperating Voltage         \u003c\/strong\u003e\u003cbr\u003e 100VAC 50\/60Hz, 120VAC 60Hz and 230VAC 50\/60Hz\u003cbr\u003e \u003cstrong\u003ePower Consumption     \u003c\/strong\u003e\u003cbr\u003e 29 W\u003cbr\u003e \u003cstrong\u003eSafety Agency Certifications      \u003c\/strong\u003e\u003cbr\u003e UL 600065, IEC 60065, EN 55013, E60065\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"DBX","offers":[{"title":"Default Title","offer_id":42510816444613,"sku":"DBX-640-DBX640VVM","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/5a37277d-b024-440c-a4a0-aca22b0eefb6.jpg?v=1737071986"},{"product_id":"bose-freespace-3-system-loudspeaker-suspension-hardware-omni-pendant-mount-kit-white","title":"Bose FreeSpace 3 System Loudspeaker Suspension Hardware Omni Pendant Mount Kit White","description":"\u003cp\u003e\u003cstrong\u003eBose FreeSpace 3 System Loudspeaker Suspension Hardware Omni Pendant Mount Kit White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSuspension hardware and loudspeaker cosmetic covers designed for hanging a complete FreeSpace- 3 series II system (FS 3BF bass loudspeaker with four FS 3S satellite loudspeakers) from a single hangpoint with open ceilings. Kit includes: cover with wires, suspension cables, eye screws, washers, and hex-head screws. Loudspeakers must be purchased separately.\u003c\/p\u003e","brand":"Bose","offers":[{"title":"Default Title","offer_id":42510862123205,"sku":"BOSE-ACC-37084","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/Bose.webp?v=1741643626"},{"product_id":"rolls-rm67-microphone-source-mixer","title":"Rolls RM67 Microphone\/Source Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls RM67 Microphone\/Source Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RM67 is  a single rack space mixer designed for the install\/contractor market. The unit  mixes three balanced microphones with four stereo sources to mono or stereo  balanced outputs. The XLR Microphone Inputs have Mic\/Line level switches, a  send\/return Insert jack, and individually switchable +12 VDC phantom power.  Priority talkover, with variable Duck Sensitivity is available on one  microphone for paging, and on one Source input for use on a jukebox. telephone  system, etc. Each Microphone input has a level and tone control, and each  Source input has a level control. Bass and Treble controls have been provided  for all the sources, and a Master Output Level control adjusts the level of all  mixed signals. Source One has an added front-panel 3.5mm input. A pre-Master  RCA output has been provided for recording, and a Remote Volume output jack is  provided for connection to a 100K ohm linear taper potentiometer and used as an  external master level control.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree XLR  mic inputs with switchable phantom power and input padding     \u003c\/li\u003e\n\u003cli\u003eClip LEDs  for each Mic input     \u003c\/li\u003e\n\u003cli\u003eMute jack,  contact closure to ground main output mute     \u003c\/li\u003e\n\u003cli\u003eMaster Level  control     \u003c\/li\u003e\n\u003cli\u003eRemote  Volume jack (connects to an optional 100K ohm potentiometer)     \u003c\/li\u003e\n\u003cli\u003eStereo  Record Out     \u003c\/li\u003e\n\u003cli\u003ePriority  ducking\/talk-over for microphone paging, and jukebox     \u003c\/li\u003e\n\u003cli\u003eMic Insert  jack for adding signal processing to the Mic Inputs     \u003c\/li\u003e\n\u003cli\u003eFour stereo  RCA line\/consumer level inputs     \u003c\/li\u003e\n\u003cli\u003eMaster Bass  and Treble controls (sources only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical  Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e   600 Ohms XLR  balanced\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   19\" x  1.75\" x 6\" (48.3 x 4.5 x 15 cm)\u003cbr\u003e   \u003cstrong\u003eNoise Floor\u003c\/strong\u003e\u003cbr\u003e   - 80 dB, THD:  \u0026lt;.025%, S\/N Ratio: 96 dB\u003cbr\u003e   \u003cstrong\u003eTone Controls\u003c\/strong\u003e\u003cbr\u003e   +\/-12 dB 100  Hz Bass +\/-12 dB 11kHz Treble\u003cbr\u003e   \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e   Mic: 60 dB  Source: 26 dB\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   51 Ohms\u003cbr\u003e   \u003cstrong\u003eOutput Level\u003c\/strong\u003e\u003cbr\u003e   +17 dBV max\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   +12 VDC\u003cbr\u003e   \u003cstrong\u003eConnectors\u003c\/strong\u003e\u003cbr\u003e   3: XLR, 6:  Stereo RCA, 3: 1\/4\" TRS, 1: 1\/4\" TS, 1: 3.5mm\u003cbr\u003e   \u003cstrong\u003eMax Input Level\u003c\/strong\u003e\u003cbr\u003e   Mic: -14 dBV  +20 dB Line level\u003cbr\u003e   \u003cstrong\u003eMic Insert\u003c\/strong\u003e\u003cbr\u003e   22K Ohms  1\/4\" TS unbal.\u003cbr\u003e   \u003cstrong\u003eSource\u003c\/strong\u003e\u003cbr\u003e   22K Ohms  gold plated RCA\u003cbr\u003e   \u003cstrong\u003eLine\u003c\/strong\u003e\u003cbr\u003e   22K Ohms\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 5 lbs. (2.3  kg)\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511571255493,"sku":"RLS-RM67","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/ff0eb48a-ff13-47ce-8df3-346629fbf84f.jpg?v=1737480729"},{"product_id":"rolls-rm316-3-zone-mixer","title":"Rolls RM316 3 Zone Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls RM316 3 Zone Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new  ROLLS RM316 Three Zone Mixer combines three microphones or XLR line level  signals with three RCA line level source inputs. Each input is switch selected  to output to any combination of three zone outputs. The outputs are all  balanced phoenix connectors, remote volume provides each zone with the means  for external remote volume control. The Microphone inputs feature selectable  ducking, paging for each individual zone. The RM316 is easy for anyone to use  from the front, from the rear it is just complex enough it will fill even the  most demanding three zone installation requirements. The RM316 is the ideal  solution for restaurants, offices, night clubs, etc.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree Mic  Inputs with independent switchable phantom power     \u003c\/li\u003e\n\u003cli\u003eThree RCA  source inputs and one front panel 3.5mm stereo input     \u003c\/li\u003e\n\u003cli\u003eThree  Balanced Phoenix Connector Zone Outputs     \u003c\/li\u003e\n\u003cli\u003eRemote Volume  for each output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical  Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   10K Ohms  balanced Line\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   50 Ohms  balanced\u003cbr\u003e   \u003cstrong\u003eMax Input Level\u003c\/strong\u003e\u003cbr\u003e   Mic\u003cbr\u003e   -30 dB \/ Source\u003cbr\u003e   +22 dB\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   +15 Volts DC\u003cbr\u003e   \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e   60 dB mic 30  dB line\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e   \u0026gt;75 dB\u003cbr\u003e   \u003cstrong\u003eTHD\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; .3%\u003cbr\u003e   \u003cstrong\u003eIMD (SMPTE)\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; .3%\u003cbr\u003e   \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e   60 dB\u003cbr\u003e   \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   20Hz to  20kHz +\/- 0 dB\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e 19” x 1.75”  x 6.5”\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511571452101,"sku":"RLS-RM316","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/40cd54c2-48e2-4749-8773-fb7f495a935d.jpg?v=1737480726"},{"product_id":"rolls-mx153-mixmate-1-2ru-2-mic-and-3-stereo-source-mixer-with-ps27","title":"Rolls MX153 MixMate 1\/2RU 2 Mic and 3 Stereo Source Mixer with PS27","description":"\u003cp\u003e\u003cstrong\u003eRolls MX153 MixMate 1\/2RU 2 Mic and 3 Stereo Source Mixer with PS27\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Rolls MX153 is a one-half rack space, two microphone and three stereo source mixer. The unit provides a compact and efficient way to mix sources such as AM\/FM tuners, CD players, and video players with dynamic or condenser microphones. Applications include background music and paging for small clubs, churches, schools, restaurants, etc.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Mic inputs with available phantom power\u003c\/li\u003e\n\u003cli\u003eTreble or Bass cut controls for each mic\u003c\/li\u003e\n\u003cli\u003eThree stereo source inputs\u003c\/li\u003e\n\u003cli\u003eBass and Treble controls on source 1 and 2\u003c\/li\u003e\n\u003cli\u003eSignal muting (ducking) on mic 1 and source 3\u003c\/li\u003e\n\u003cli\u003eSwitchable Mono or Stereo mode on unbalanced outputs\u003c\/li\u003e\n\u003cli\u003eUses 12VDC power for easy use in mobile applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003eMic input Z 600 ohm balanced\u003cbr\u003e \u003cstrong\u003eSource input\u003c\/strong\u003e\u003cbr\u003e Z \u0026gt;10K ohms RCA\u003cbr\u003e \u003cstrong\u003eMic Max input\u003c\/strong\u003e\u003cbr\u003e -14dBV\u003cbr\u003e \u003cstrong\u003eMax source input\u003c\/strong\u003e\u003cbr\u003e 24dBV\u003cbr\u003e \u003cstrong\u003ePhantom Voltage\u003c\/strong\u003e\u003cbr\u003e 12VDC\u003cbr\u003e \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e 60 dBV mic\u003cbr\u003e \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e 24 dBV\/Channel source\u003cbr\u003e \u003cstrong\u003eMuting\u003c\/strong\u003e\u003cbr\u003e 60dBV\u003cbr\u003e \u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e 12VDC 100Ma.\u003cbr\u003e \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e 6.5 x 1.5 x 5 (W x H x D)\u003cbr\u003e \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 2 lbs (.8Kg)\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511572140229,"sku":"RLS-MX153","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/43888379-0815-4ba8-870a-1020abc2b49c.jpg?v=1737480538"},{"product_id":"studio-technologies-742a-audio-mixer","title":"Studio Technologies 742A Audio Mixer","description":"\u003cp\u003e\u003cstrong\u003eStudio Technologies 742A Audio Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model  742A Audio Mixer is expressly designed for use in electronic-news-gathering  (ENG) vehicles and small production truck applications. Many other fixed and  mobile audio production, on-air, and utility applications can also be  supported. Model 742A features include four mic\/line inputs with +48 volt  phantom power, four line inputs, two output buses, LED level metering, flexible  monitoring, and AC and DC powering. The Model 742A was specifically designed as  a dual-channel audio mixer, rather than as a typical stereo device. This  approach makes it excellent for \"dual-path\" on-air applications. As a  utility mixer the Model 742A can create two independent monaural signals,  excellent for general signal monitoring, talent cueing, or intercom support  uses.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour  mic\/line and four line-only inputs     \u003c\/li\u003e\n\u003cli\u003eSetup  oscillator with dedicated output     \u003c\/li\u003e\n\u003cli\u003eStudio-quality  compressors     \u003c\/li\u003e\n\u003cli\u003eInternal  power supply     \u003c\/li\u003e\n\u003cli\u003eFlexible  monitor section     \u003c\/li\u003e\n\u003cli\u003e10-segment  LED meters     \u003c\/li\u003e\n\u003cli\u003eAC mains and  DC powering     \u003c\/li\u003e\n\u003cli\u003e+48 volt  phantom power     \u003c\/li\u003e\n\u003cli\u003eAll operator  controls on front panel     \u003c\/li\u003e\n\u003cli\u003eSingle  rack-space mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical  Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   20 Hz to 20  kHz, -0.5 dB, mic\/line in to main outs\u003cbr\u003e   \u003cstrong\u003eDistortion (THD+N)\u003c\/strong\u003e\u003cbr\u003e   0.03 %,  measured at 1 kHz, +4 dBu, mic\/line in to main outs\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e   74 dB,  referenced to +4 dBu, mic\/line in to main outs, 22 Hz to 22 kHz\u003cbr\u003e   \u003cstrong\u003eMic\/Line Inputs\u003c\/strong\u003e\u003cbr\u003e   4\u003cbr\u003e   \u003cstrong\u003eInput Sensitivity\u003c\/strong\u003e\u003cbr\u003e   Switch  selectable for microphone or line-level signals; 44 dB line input  \"pad\" implemented using sealed bifurcated contact telecom relays\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   48 Vdc,  nominal, meets IEC 61938 P48 standard\u003cbr\u003e   \u003cstrong\u003eOperating Level Range\u003c\/strong\u003e\u003cbr\u003e   Mic input  position: -76 to -8 dBu; line position: -32 to +28 dBu. Range specified to give  +4 dBu on main outs, master level controls set to unity gain.\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Electronically  balanced\u003cbr\u003e   \u003cstrong\u003eImpedance\u003c\/strong\u003e\u003cbr\u003e   Mic position  1.3 k ohms, line position 15 k ohms\u003cbr\u003e   \u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e   74 dB @ 60  Hz, 73 dB @ 40 kHz (typical), mic position, ref +4 dBu on main outs\u003cbr\u003e   \u003cstrong\u003eStatus LED\u003c\/strong\u003e\u003cbr\u003e   Dual-color,  displays signal present and peak\u003cbr\u003e   \u003cstrong\u003eLine Inputs\u003c\/strong\u003e\u003cbr\u003e   4\u003cbr\u003e   \u003cstrong\u003eOperating Level Range\u003c\/strong\u003e\u003cbr\u003e   -14 to +28  dBu. Range specified to give +4 dBu on main outs, master level controls set to  unity gain.\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Electronically  balanced\u003cbr\u003e   \u003cstrong\u003eImpedance\u003c\/strong\u003e\u003cbr\u003e   24 k ohms,  nominal\u003cbr\u003e   \u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e   85 dB @ 60  Hz, 85 dB @ 40 kHz (typical), ref +4 dBu on main outs\u003cbr\u003e   \u003cstrong\u003eStatus LED\u003c\/strong\u003e\u003cbr\u003e   Dual-color,  displays signal present and peak\u003cbr\u003e   \u003cstrong\u003eCompressors\u003c\/strong\u003e\u003cbr\u003e   2\u003cbr\u003e   \u003cstrong\u003eFunction\u003c\/strong\u003e\u003cbr\u003e   Controls  dynamic range of output buses 1 and 2\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Single-knee,  VCA-controlled\u003cbr\u003e   \u003cstrong\u003eSlope\u003c\/strong\u003e\u003cbr\u003e   5:1\u003cbr\u003e   \u003cstrong\u003eThreshold\u003c\/strong\u003e\u003cbr\u003e   Configurable,  choices are: 6 dB over nominal (+10 dBu on main output, factory default); 2 dB  over nominal (+6 dBu on main out); disabled\u003cbr\u003e   \u003cstrong\u003eAttack Time\u003c\/strong\u003e\u003cbr\u003e   2 ms\u003cbr\u003e   \u003cstrong\u003eRelease Time\u003c\/strong\u003e\u003cbr\u003e   100 ms\u003cbr\u003e   \u003cstrong\u003eStatus LEDs\u003c\/strong\u003e\u003cbr\u003e   2,  compressor active\u003cbr\u003e   \u003cstrong\u003eMain Outputs\u003c\/strong\u003e\u003cbr\u003e   2\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Electronically  balanced, capacitor-coupled, intended to drive balanced or unbalanced loads of  600 ohms or greater\u003cbr\u003e   \u003cstrong\u003eSource Impedance\u003c\/strong\u003e\u003cbr\u003e   50 ohms,  nominal\u003cbr\u003e   \u003cstrong\u003eNominal Level\u003c\/strong\u003e\u003cbr\u003e   +4 dBu\u003cbr\u003e   \u003cstrong\u003eMaximum Level\u003c\/strong\u003e\u003cbr\u003e   +26 dBu into  10 k ohms, +25 dBu into 600 ohms\u003cbr\u003e   \u003cstrong\u003eMonitor Outputs\u003c\/strong\u003e\u003cbr\u003e   2\u003cbr\u003e   \u003cstrong\u003eSignal Sources\u003c\/strong\u003e\u003cbr\u003e   Output buses  1 and 2\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Electronically  balanced, capacitor-coupled, intended to drive balanced or unbalanced loads of  600 ohms or greater\u003cbr\u003e   \u003cstrong\u003eSource Impedance\u003c\/strong\u003e\u003cbr\u003e   50 ohms,  nominal\u003cbr\u003e   \u003cstrong\u003eNominal Level\u003c\/strong\u003e\u003cbr\u003e   Configurable,  choice are: +6 dBu, with monitor level control @ 100%, mode configured for POST  level control; -10 dBu when configured for PRE -10; +4 dBu when configured for  PRE +4\u003cbr\u003e   \u003cstrong\u003eMaximum Level\u003c\/strong\u003e\u003cbr\u003e   +26 dBu into  10 k ohms, +25 dBu into 600 ohms\u003cbr\u003e   \u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003e   1\u003cbr\u003e   \u003cstrong\u003eSignal Sources\u003c\/strong\u003e\u003cbr\u003e   Output buses  1 and 2 (\"post\" monitor level controls)\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   Stereo,  configured to drive headphones through 100 ohm series resistors\u003cbr\u003e   \u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e   Intended for  connection to headphones with impedance of 100 ohms or greater\u003cbr\u003e   \u003cstrong\u003eMaximum Voltage\u003c\/strong\u003e\u003cbr\u003e   8 Vpp, 100  ohm load\u003cbr\u003e   \u003cstrong\u003eReference Tone\u003c\/strong\u003e\u003cbr\u003e   \u003cstrong\u003eFrequency and Wave Form\u003c\/strong\u003e\u003cbr\u003e   400 Hz  nominal, sine wave (technician can revise to 1 kHz)\u003cbr\u003e   \u003cstrong\u003eDirect Output Level\u003c\/strong\u003e\u003cbr\u003e   +4 dBu,  nominal, adjustable over -1\/+3 dB range\u003cbr\u003e   \u003cstrong\u003eDirect Output Type\u003c\/strong\u003e\u003cbr\u003e   Electronically  balanced, capacitor-coupled, intended to drive balanced or unbalanced loads of  600 ohms or greater\u003cbr\u003e   \u003cstrong\u003eDirect Output Source Impedance\u003c\/strong\u003e\u003cbr\u003e   100 ohms,  nominal\u003cbr\u003e   \u003cstrong\u003eMeters\u003c\/strong\u003e\u003cbr\u003e   2\u003cbr\u003e   \u003cstrong\u003eFunction\u003c\/strong\u003e\u003cbr\u003e   Displays  level of output buses 1 and 2\u003cbr\u003e   \u003cstrong\u003eType\u003c\/strong\u003e\u003cbr\u003e   10-segment  LED, modified VU ballistics\u003cbr\u003e   \u003cstrong\u003eConnectors\u003c\/strong\u003e\u003cbr\u003e   \u003cstrong\u003eMic\/Line and Line Inputs\u003c\/strong\u003e\u003cbr\u003e   3-pin female  XLR\u003cbr\u003e   \u003cstrong\u003eMain Outputs\u003c\/strong\u003e\u003cbr\u003e   3-pin male  XLR\u003cbr\u003e   Reference  Tone Direct Output, Monitor Outputs, Headphone Output: 1\/4-inch 3-conductor  phone jack\u003cbr\u003e   \u003cstrong\u003eAC Mains Input\u003c\/strong\u003e\u003cbr\u003e   3-blade, IEC  320 C14-compatible (mates with IEC 320 C13)\u003cbr\u003e   \u003cstrong\u003eDC Input\u003c\/strong\u003e\u003cbr\u003e   4-pin male  XLR\u003cbr\u003e   \u003cstrong\u003eAC Mains Requirement\u003c\/strong\u003e\u003cbr\u003e   100-240  volts (-15\/+10%), 50\/60 Hz, 15 W maximum\u003cbr\u003e   \u003cstrong\u003eDC Input\u003c\/strong\u003e\u003cbr\u003e   10-18 volts  DC, 1.0 A maximum @ 12 volts; 1.1 A maximum @ 10 volts; current draw when AC  present is less than 100 uA\u003cbr\u003e   \u003cstrong\u003eDimensions (Overall)\u003c\/strong\u003e\u003cbr\u003e   19.0 inches  wide (48.3 cm) x 1.72 inches high (8.9 cm) x 9.2 inches deep (23.4 cm)\u003cbr\u003e   \u003cstrong\u003eMounting\u003c\/strong\u003e\u003cbr\u003e   One space  (1U) in a standard 19-inch rack\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 4.3 pounds  (1.9 kg)\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":42511572304069,"sku":"STUT-742A","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/80fab5ef-9708-4a82-9f8e-1b2aaa9a11b3.jpg?v=1737497700"},{"product_id":"rolls-mx410-4-channel-field-mixer-with-led-meters","title":"Rolls MX410 4 Channel Field Mixer with LED Meters","description":"\u003cp\u003e\u003cstrong\u003eRolls MX410 4 Channel Field Mixer with LED Meters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Rolls MX410 is a four channel, microphone mixer with balanced XLR inputs and outputs. The unit is ideal for the broadcast and video markets. It has the same features of other ENG \/ portable mixers without the extremely high price.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour balanced XLR Inputs.\u003c\/li\u003e\n\u003cli\u003eTwo transformer-balanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Output Level ( Line level, or mic)\u003c\/li\u003e\n\u003cli\u003eSwitchable Phantom Power for each input.\u003c\/li\u003e\n\u003cli\u003eLevel controls for each channel.\u003c\/li\u003e\n\u003cli\u003e3.5mm Headphone Output and Level control.\u003c\/li\u003e\n\u003cli\u003eRolls PS27s external power supply included.\u003c\/li\u003e\n\u003cli\u003ePowered by two 9 volt batteries or the included power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e 600 Ohm bal. \/10K Ohm Aux.\u003cbr\u003e \u003cstrong\u003eOutput Attn. Switch\u003c\/strong\u003e\u003cbr\u003e 0\/-30 dB\u003cbr\u003e \u003cstrong\u003eSelf Noise\u003c\/strong\u003e\u003cbr\u003e -65 dB maximum, -90 dB typical\u003cbr\u003e \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e +55 db\u003cbr\u003e \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e 115 dB\u003cbr\u003e \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e 20 Hz - 20 kHz | +0, -3 dB\u003cbr\u003e \u003cstrong\u003eMax Input\u003c\/strong\u003e\u003cbr\u003e -20 dBV\u003cbr\u003e \u003cstrong\u003eCurrent Draw\u003c\/strong\u003e\u003cbr\u003e 30 mA with no Phantom Power or Signal.\u003cbr\u003e \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e +18 VDC\u003cbr\u003e \u003cstrong\u003eConnectors\u003c\/strong\u003e\u003cbr\u003e 4: Female XLR, 2: Male XLR, 3: (3.5mm), 1 Center Negative power jack.\u003cbr\u003e \u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e 12-15VDC \/ \u0026lt; 300-500 mA\u003cbr\u003e \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e 9\" W x 6.75\" D x 1.5\" H\u003cbr\u003e \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 2.45 lbs\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511573647557,"sku":"RLS-MX410","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/7b498f3a-ddb7-45a5-8be6-7ccec3e822b9.jpg?v=1737480571"},{"product_id":"cloud-electronics-mx141m-1u-media-mixer","title":"Cloud Electronics MX141M 1U Media Mixer","description":"\u003cp\u003e\u003cstrong\u003eCloud Electronics MX141M 1U Media Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cloud MX141M is a cost-effective, rack mounting (1U) stereo audio mixer\/media player ideal for use in all types of commercial premises. It is simple to install and operate and provides a useful range of features and configuration options. It combines an audio mixer for one of four stereo music sources plus a microphone: one of the music sources is an on-board media player which incorporates both Bluetooth wireless technology and an FM tuner. The MX141M is supplied with an infrared remote control for the media player functions and is the perfect centrepiece for commercial sound systems in hospitality and fitness centre applications.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 Line Level Inputs (RCA)\u003c\/li\u003e\n\u003cli\u003e1 x Slave FOH Input (Stereo TRS)\u003c\/li\u003e\n\u003cli\u003e1 Media Input (Bluetooth, USB, FM)\u003c\/li\u003e\n\u003cli\u003e1 Mic Input (Combo XLR \u0026amp; TRS)\u003c\/li\u003e\n\u003cli\u003eSingle Output (Euro Con or RCA or TRS)\u003c\/li\u003e\n\u003cli\u003eEQ Control for Mic \u0026amp; Master Output\u003c\/li\u003e\n\u003cli\u003eIR Remote for Media Player Functions\u003c\/li\u003e\n\u003cli\u003eEmergency Line Level Input\u003c\/li\u003e\n\u003cli\u003eMusic Mute Contact (NO only)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cloud Electronics","offers":[{"title":"Default Title","offer_id":42511573909701,"sku":"CLDELEC-MX141M","price":330.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/f6585b29-169a-44d7-8359-f6b6d8898d8c.jpg?v=1737064485"},{"product_id":"cloud-electronics-mx155-1u-7-channel-mic-line-mixer","title":"Cloud Electronics MX155 1U 7-Channel Mic\/Line Mixer","description":"\u003cp\u003e\u003cstrong\u003eCloud Electronics MX155 1U 7-Channel Mic\/Line Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX155 is a 7-Channel mic\/line mixer with 5 multi-purpose mic\/line inputs, one dedicated microphone input and talk-over feature. All inputs feature EQ’s and Gain control. The balanced output is provided via Euroblock connector. Remote muting and emergency signal replay facilitate the use in installed sound systems.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 x Mic\/Line Level Inputs (Euro\/RCA)\u003c\/li\u003e\n\u003cli\u003e1 x Slave FOH or AUX Input (Stereo TRS or 3.5mm Stereo Jack)\u003c\/li\u003e\n\u003cli\u003e1 x Dedicated Mic Input w\/VOX Feature (Euro Con)\u003c\/li\u003e\n\u003cli\u003eHeadphone Pre-Fade Monitor Jack\u003c\/li\u003e\n\u003cli\u003eStereo REC Output (RCA)\u003c\/li\u003e\n\u003cli\u003eStereo Balanced Output (Euro Con)\u003c\/li\u003e\n\u003cli\u003eEmergency Line Level Input\u003c\/li\u003e\n\u003cli\u003eMusic Mute Contact (NO only)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cloud Electronics","offers":[{"title":"Default Title","offer_id":42511574270149,"sku":"CLDELEC-MX155","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1mx155__86514-scaled.jpg?v=1706849830"},{"product_id":"art-mx821s-8-channel-mic-line-mixer-with-stereo-outputs","title":"ART MX821S 8-Channel Mic\/Line Mixer with Stereo Outputs","description":"\u003cp\u003e\u003cstrong\u003eART MX821S 8-Channel Mic\/Line Mixer with Stereo Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1\/4-inch TS line-level signal and provides independent level and pan controls.\u003c\/p\u003e\n\u003cp\u003e+48 Volt phantom power may be independently selected on each microphone input. A master level control adjusts the signal output to the low-impedance balanced 1\/4-inch TRS jacks.\u003c\/p\u003e\n\u003cp\u003ePrefade output (not affected by the master level control) and Aux Bus input RCA jacks allow patching of multiple units when more channels are needed.\u003c\/p\u003e\n\u003cp\u003eThe ART MX821S may be used on stage, in the studio, or for permanent install applications including conference rooms, corporate boardrooms, churches, restaurants, small clubs, health clubs and more. A built-in power supply and single high 19-inch rack mount format allows for easy installation and reliable long-term operation.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEight input channels with individual level and pan controls\u003c\/li\u003e\n\u003cli\u003ePan controls place each input mono signal anywhere in the output stereo image\u003c\/li\u003e\n\u003cli\u003eBalanced microphone XLR or unbalanced 1\/4-inch TS inputs on each channel\u003c\/li\u003e\n\u003cli\u003eFull +48V low noise phantom power switchable for each microphone input\u003c\/li\u003e\n\u003cli\u003eBalanced left and right 1\/4-inch TRS main output jacks with master level control\u003c\/li\u003e\n\u003cli\u003ePrefade Output jacks and Aux Bus Input jacks allow units to be chained to provide extra inputs\u003c\/li\u003e\n\u003cli\u003eEach line input jack may be individually converted to a direct line output by means of internal jumpers\u003c\/li\u003e\n\u003cli\u003eRugged 1U rack-mount steel chassis with built-in power supply\u003c\/li\u003e\n\u003cli\u003ePerfect for stage, studio and permanent installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Connections\u003c\/strong\u003e\u003cbr\u003e\nXLR female balanced (Mic, channels 1-8)\u003cbr\u003e\n1\/4-inch TS unbalanced (Line, channels 1-8)\u003cbr\u003e\nRCA unbalanced (Aux Bus In, Left and Right)\u003cbr\u003e\n\u003cstrong\u003eOutput Connections\u003c\/strong\u003e\u003cbr\u003e\n1\/4-inch TRS balanced (Main Outputs, Left and Right)\u003cbr\u003e\nRCA unbalanced (Prefade Out, Left and Right)\u003cbr\u003e\n\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e\n2k OHM (Mic), 20k OHM (Line), 51k OHM (Aux Bus In)\u003cbr\u003e\n\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e\n200 OHM (Main Outputs, balanced),\u003cbr\u003e\n100 OHM (Prefade Out)\u003cbr\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n20 Hz - 20 kHz (+0, -1 dB) (CH 1-8 in, M\u003cbr\u003e\n\u003cstrong\u003eTotal Harmonic Distortion\u003c\/strong\u003e\u003cbr\u003e\n\u0026lt;0.01% @ 1 kHz, typical\u003cbr\u003e\n\u003cstrong\u003ePhase Response\u003c\/strong\u003e\u003cbr\u003e\nAll connections are phase coherent\u003cbr\u003e\n\u003cstrong\u003eSignal to Noise Ratio\u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;99dB typical (Ref 0dBu)\u003cbr\u003e\n\u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n\u0026gt;43 dB typical\u003cbr\u003e\n\u003cstrong\u003eMaximum Input Level\u003c\/strong\u003e\u003cbr\u003e\n-4 dBu (Mic), +22 dBu (Line)\u003cbr\u003e\n\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e\n+24 dBu (balanced), +18 dBu (unbalanced)\u003cbr\u003e\n\u003cstrong\u003eMaximum Gain\u003c\/strong\u003e\u003cbr\u003e\n54 dB (Mic), 29 dB (Line)\u003cbr\u003e\n\u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e\nSwitch Selectable, +48V DC (regulated and filtered), 7 mA current limiting per leg\u003cbr\u003e\n\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e\nUSA: 95-125 VAC, 50-60 Hz, \u0026lt;15W\u003cbr\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n1.75” x 19” x 6” (4.5cm x 48.3cm x 15.2cm)\u003cbr\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e\n6.3 lbs (2.9 kg)\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":42511576039621,"sku":"ARTP-MX821S","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/af518973-ebb1-4f05-b88a-9a96c3c2bf80.jpg?v=1737054588"},{"product_id":"toa-electronics-a-9060sm2-1-x-60w-digital-matrix-mixer","title":"TOA Electronics A-9060SM2 1 x 60W Digital Matrix Mixer","description":"\u003cp\u003e\u003cstrong\u003eTOA Electronics A-9060SM2 1 x 60W Digital Matrix Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-9060SM2 CU Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. Since it comes with one 60W power amplifier, it can individually perform multi-origin braodcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.\u003c\/p\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":42511576563909,"sku":"TOA-A9060SM2","price":1025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/a5a54016-0a04-46ba-9355-35de79fac023.jpg?v=1737502224"},{"product_id":"toa-electronics-a-9240shm2cu-1-x-240w-digital-matrix-mixer","title":"TOA Electronics A-9240SHM2CU 1 x 240W Digital Matrix Mixer","description":"\u003cp\u003e\u003cstrong\u003eTOA Electronics A-9240SHM2CU 1 x 240W Digital Matrix Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-9240SHM2  Amplifier is designed to be used in conjunction with optional modules and can  be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as  existing 900 series input modules can be used. The most appropriate modules can  be selected depending on applications. Since it comes with one 240 W power  amplifier, it can individually perform multi-origin broadcasts. It is equipped  with signal processing and control functions necessary for sound reinforcement,  permitting all parameters to be set at the mixer. Settings data can be stored  inside the unit and called up using the keys on the front panel.\u003c\/p\u003e\n\u003cp class=\"specs\"\u003eTechnical  Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e\u003cbr\u003e   120 V AC, 60  Hz\u003cbr\u003e   \u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003cbr\u003e   250 W\u003cbr\u003e   \u003cstrong\u003eRated Output\u003c\/strong\u003e\u003cbr\u003e   240 W\u003cbr\u003e   \u003cstrong\u003eAudio Input\u003c\/strong\u003e\u003cbr\u003e   Max. 8  channels, modular construction (modules optional)\u003cbr\u003e   Power  amplifier input: 0 dB(*1), 10 k, RCA pin jack\u003cbr\u003e   \u003cstrong\u003eAudio Output\u003c\/strong\u003e\u003cbr\u003e   Preamplifier  output 1: 0 dB(*1), 300 , unbalanced, RCA pin jack\u003cbr\u003e   Preamplifier  output 2: 0 dB(*1), 600 , balanced, removable terminal block (3 pins)\u003cbr\u003e   Speaker output:  240 W, 21 , BTL output, removable terminal block (4 pins)\u003cbr\u003e   \u003cstrong\u003eModule Slot\u003c\/strong\u003e\u003cbr\u003e   Analog input  (slot 1 - 8): -10 dB(*1), 10 k, unbalanced\u003cbr\u003e   Digital  input (slot 1 - 4): 24 bit\/48 kHz\u003cbr\u003e   MIX output  (slot 1 - 8): -14 dB(*1), 330  (CH 1 prefader output), unbalanced\u003cbr\u003e   Digital  output (slot 5 - 7): 24 bit\/48 kHz\u003cbr\u003e   Power supply  (slot 1 - 8): +24 V, -24 V, +6 V DC\u003cbr\u003e   \u003cstrong\u003eDigital Audio Signal Reference Level\u003c\/strong\u003e\u003cbr\u003e   -20 dBFS\u003cbr\u003e   \u003cstrong\u003ePower Bandwidth\u003c\/strong\u003e\u003cbr\u003e   20 Hz - 20  kHz, 0.008 % THD\u003cbr\u003e   \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   Power  amplifier section: 20 Hz - 20 kHz, +0, -1 dB\u003cbr\u003e   Analog input  module to speaker output: 20 Hz - 20 kHz, +1, -3 dB\u003cbr\u003e   \u003cstrong\u003eTotal Harmonic Distortion\u003c\/strong\u003e\u003cbr\u003e   Power  amplifier section: 0.0008 % (22 kHz LPF, 1 kHz, rated power)\u003cbr\u003e   Analog input  module to speaker output: 0.008 % (22 kHz LPF, 1 kHz, rated power)\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e   At Input short,  20 Hz - 20 kHz, set to ALL FLAT or OFF setting\u003cbr\u003e   Output  volume min.: 90 dB (preamplifier output)\u003cbr\u003e   Output  volume max.: 61 dB\u003cbr\u003e   (preamplifier  output, Input 1 volume: 0 dB, Other Inputs: OFF)\u003cbr\u003e   Power  amplifier section: 110 dB\u003cbr\u003e   \u003cstrong\u003eCross Talk\u003c\/strong\u003e\u003cbr\u003e   64 dB or  more (at 20 kHz)\u003cbr\u003e   \u003cstrong\u003eTone Control\u003c\/strong\u003e\u003cbr\u003e   Bass: -12 dB  (at 100 Hz)\u003cbr\u003e   Treble:  %%p12 dB (at 10 kHz)\u003cbr\u003e   \u003cstrong\u003eParametric Equalizer\u003c\/strong\u003e\u003cbr\u003e   10 bands,  Frequency: 20 Hz - 20 kHz, 31 points, Variable range: -12 dB, Q: 0.3 - 5\u003cbr\u003e   \u003cstrong\u003eSpeaker Equalizer\u003c\/strong\u003e\u003cbr\u003e   10 (setup  software has 30 TOA speaker presets)\u003cbr\u003e   \u003cstrong\u003eHigh-pass Filter\u003c\/strong\u003e\u003cbr\u003e   -12 dB\/oct,  Variable frequency range: 20 Hz - 20 kHz, 31 points\u003cbr\u003e   \u003cstrong\u003eLow-pass Filter\u003c\/strong\u003e\u003cbr\u003e   -12 dB\/oct,  Variable frequency range: 20 Hz - 20 kHz, 31 points\u003cbr\u003e   \u003cstrong\u003eCompressor\u003c\/strong\u003e\u003cbr\u003e   Depth: 1 - 5\u003cbr\u003e   \u003cstrong\u003eDelay\u003c\/strong\u003e\u003cbr\u003e   0 - 40 ms (1  ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only\u003cbr\u003e   \u003cstrong\u003eScene\/Event Memory\u003c\/strong\u003e\u003cbr\u003e   32\u003cbr\u003e   \u003cstrong\u003eAuxiliary Function\u003c\/strong\u003e\u003cbr\u003e   Key lock  function\u003cbr\u003e   \u003cstrong\u003eControl Input\/Output\u003c\/strong\u003e\u003cbr\u003e   RS-232C(*2),  D-sub connector (9 P, female)\u003cbr\u003e   Control  input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,\u003cbr\u003e   short-circuit  current: 1 mA or less, removable terminal block (14 pins)\u003cbr\u003e   Control  output: 4 outputs, open collector output, withstand voltage: 27 V DC,\u003cbr\u003e   control  current: 50 mA, removable terminal block (14 pins)\u003cbr\u003e   Remote  volume: 2 channels, connect a 10 k\/linear taper variable resistor or\u003cbr\u003e   input the DC  voltage of 0 to +10 V, removable terminal block (14 pins)\u003cbr\u003e   \u003cstrong\u003eOperating Humidity\u003c\/strong\u003e\u003cbr\u003e   35 % to 80  %RH (no condensation)\u003cbr\u003e   \u003cstrong\u003eFinish\u003c\/strong\u003e\u003cbr\u003e   Panel:  Aluminum, hair-line, black\u003cbr\u003e   Case:  Surface-treated steel plate, black, paint\u003cbr\u003e   \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e   420 (W)   107.6 (H) - 395 (D) mm (16.54\" - 4.24\" - 15.55\")\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 11 kg (24.25  lb)\u003c\/p\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":42511576662213,"sku":"TOA-A9240SHM2CU","price":1592.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/50752410-99d7-4c4c-b8aa-f5ade531820a.jpg?v=1737502246"},{"product_id":"toa-electronics-a-9120sm2-1-x-120w-digital-matrix-mixer","title":"TOA Electronics A-9120SM2 1 x 120W Digital Matrix Mixer","description":"\u003cp\u003e\u003cstrong\u003eTOA Electronics A-9120SM2 1 x 120W Digital Matrix Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-9120SM2 CU Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. Since it comes with one 120W power amplifier, it can individually perform multi-origin braodcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.\u003c\/p\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":42511577448645,"sku":"TOA-A9120SM2","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/655eeb26-25ca-4a83-8eef-3fe3d57b0c79.jpg?v=1737502237"},{"product_id":"yorkville-mm5d-micromix-series-powered-box-mixer","title":"Yorkville MM5D MicroMix Series Powered Box Mixer","description":"\u003cp\u003e\u003cstrong\u003eYorkville MM5D MicroMix Series Powered Box Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MicroMix MM5D powered box mixer is the ideal PA solution for most applications where 2 x 90 watts (stereo) is enough power yet input flexibility is required. Balanced XLR mic, 1\/4-inch phone and dual RCA line inputs, onboard user controlled digital effect unit and tape outs (with separate level controls) make the MM5D the perfect powered mixer for live PA, rehearsal, installation or announcement PA applications.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 input channels ( XLR \u0026amp; 1\/4-inch in, 2-band EQ, level \u0026amp; effects send control per channel)\u003c\/li\u003e\n\u003cli\u003eAdditional CD\/Tape in with level control\u003c\/li\u003e\n\u003cli\u003eSeparate Record out with level control\u003c\/li\u003e\n\u003cli\u003eStereo 7-band master Graphic EQ\u003c\/li\u003e\n\u003cli\u003e2 x 90w powered out (stereo)\u003c\/li\u003e\n\u003cli\u003e1\/4-inch \u0026amp; Speakon speaker output jacks\u003c\/li\u003e\n\u003cli\u003eOn-board Digital effects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNumber of Channels\u003c\/strong\u003e\u003cbr\u003e 5\u003cbr\u003e \u003cstrong\u003eMono Channel EQ\u003c\/strong\u003e\u003cbr\u003e 2 band shelving\u003cbr\u003e \u003cstrong\u003eChannel Effects\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eInputs - XLR (bal)\u003c\/strong\u003e\u003cbr\u003e Ch. 1 - 5\u003cbr\u003e \u003cstrong\u003eInputs - 1\/4\"\u003c\/strong\u003e\u003cbr\u003e Ch. 1 - 5\u003cbr\u003e \u003cstrong\u003eInputs - RCA (unbal)\u003c\/strong\u003e\u003cbr\u003e Tape\/CD in\u003cbr\u003e \u003cstrong\u003eInternal Effects\u003c\/strong\u003e\u003cbr\u003e 16 Digital Effects: reverb, echo, chorus, flange\u003cbr\u003e \u003cstrong\u003eEffects Send\u003c\/strong\u003e\u003cbr\u003e No\u003cbr\u003e \u003cstrong\u003eEffects Return\u003c\/strong\u003e\u003cbr\u003e No\u003cbr\u003e \u003cstrong\u003eEffects Return to Main\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eEffects Return to Monitor\u003c\/strong\u003e\u003cbr\u003e No\u003cbr\u003e \u003cstrong\u003eRecord Outputs\u003c\/strong\u003e\u003cbr\u003e Stereo RCA with level control\u003cbr\u003e \u003cstrong\u003eMax Gain to Line Out -Mic Input (dB)\u003c\/strong\u003e\u003cbr\u003e 84dB\u003cbr\u003e \u003cstrong\u003eMax Gain to Line Out -Line Input (dB)\u003c\/strong\u003e\u003cbr\u003e 70dB\u003cbr\u003e \u003cstrong\u003eMain Outputs (Line Level)\u003c\/strong\u003e\u003cbr\u003e No\u003cbr\u003e \u003cstrong\u003eOutputs - Amp A - 1\/4\" Jacks\u003c\/strong\u003e\u003cbr\u003e 1\u003cbr\u003e \u003cstrong\u003eOutputs - Amp A - Speakon 4-pin\u003c\/strong\u003e\u003cbr\u003e 1\u003cbr\u003e 40Hz - 20,000Hz\u003cbr\u003e \u003cstrong\u003eAmp A-Power Output@8 Ohms (0.1 PER THD 1kHz)\u003c\/strong\u003e\u003cbr\u003e 2 x 60 watts\u003cbr\u003e \u003cstrong\u003eAmp A - Power Output @ 4 Ohms\u003c\/strong\u003e\u003cbr\u003e 2 x 90 watts\u003cbr\u003e \u003cstrong\u003eTHD - 1kHz (dB)\u003c\/strong\u003e\u003cbr\u003e less than 0.1%\u003cbr\u003e \u003cstrong\u003eTypical crosstalk -1 kHz (dB-\u003c\/strong\u003e\u003cbr\u003e less than - 60dB\u003cbr\u003e \u003cstrong\u003ePower Consumption (typ\/max)\u003c\/strong\u003e\u003cbr\u003e 1.0 A @ 120VAC \/ 0.5 A @ 230VAC\u003cbr\u003e \u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003e Clip limiter, thermal shutdown\u003cbr\u003e \u003cstrong\u003eCooling\u003c\/strong\u003e\u003cbr\u003e Passive heatsink and internal Fan\u003cbr\u003e \u003cstrong\u003eDimensions (DWH, inches)\u003c\/strong\u003e\u003cbr\u003e 9 x 17.75 x 6\u003cbr\u003e \u003cstrong\u003eDimensions (DWH, cm)\u003c\/strong\u003e\u003cbr\u003e 22.85 x 45 x 15.25\u003cbr\u003e \u003cstrong\u003eWeight (lbs\/kg)\u003c\/strong\u003e\u003cbr\u003e 19.2 \/ 9.7\u003c\/p\u003e\n\u003cp\u003e \u003cscript type=\"text\/javascript\" src=\"chrome-extension:\/\/hhojmcideegachlhfgfdhailpfhgknjm\/web_accessible_resources\/index.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e","brand":"Yorkville","offers":[{"title":"Default Title","offer_id":42511577514181,"sku":"YOR-MM5D","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/4c206e17-660a-49d6-8c97-0c052bc7694c_ff39e747-a197-4357-93b7-d04ffec88068.jpg?v=1737569710"},{"product_id":"yorkville-pgm8-8-channel-compact-live-sound-mixer","title":"Yorkville PGM8 8 Channel Compact Live Sound Mixer","description":"\u003cp\u003e\u003cstrong\u003eYorkville PGM8 8 Channel Compact Live Sound Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe  Yorkville PGM8 delivers all of the essential features needed in a professional  mixer in a convenient, ultra-compact package. High quality 60mm faders  throughout, effective fully featured input channel design, 24-bit digital  effects, and break switch make the PGM8 the perfect mixer for live music  applications and for small installs.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour Mono  Input Channels with XLR \u0026amp; -inch TRS inputs     \u003c\/li\u003e\n\u003cli\u003eChannel 4  Mono Input has a Hi-Z input switch     \u003c\/li\u003e\n\u003cli\u003eTwo  Additional stereo line input channels (5\/6 and 7\/8)     \u003c\/li\u003e\n\u003cli\u003eAdditional  XLR mono input per stereo channel for maximum 6 Mic inputs     \u003c\/li\u003e\n\u003cli\u003eInput gain  level control with Non-defeatable soft multi-slope compressor on every input     \u003c\/li\u003e\n\u003cli\u003e3-band EQ,  High Pass Filter, Monitor send , Effect Send, Clip LED, Mute Switch and Pan  control per Channel     \u003c\/li\u003e\n\u003cli\u003e60mm Faders  Throughout     \u003c\/li\u003e\n\u003cli\u003eGlobal 48  volt Phantom Power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical  Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNumber of Channels\u003c\/strong\u003e\u003cbr\u003e   8\u003cbr\u003e   \u003cstrong\u003eMono Channel EQ\u003c\/strong\u003e\u003cbr\u003e   3-band\u003cbr\u003e   \u003cstrong\u003eBalance Controls\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003ePan Controls\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003eChannel Overload Protection\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003eInputs - XLR (bal)\u003c\/strong\u003e\u003cbr\u003e   6\u003cbr\u003e   \u003cstrong\u003eInputs - 1\/4\"\u003c\/strong\u003e\u003cbr\u003e   6\u003cbr\u003e   \u003cstrong\u003eInputs - RCA (unbal)\u003c\/strong\u003e\u003cbr\u003e   1 stereo  pair\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   48 volt +  LED indicator\u003cbr\u003e   \u003cstrong\u003eVU Meter\u003c\/strong\u003e\u003cbr\u003e   2 x 10  Segment LEDs\u003cbr\u003e   \u003cstrong\u003eHeadphone Monitor Features\u003c\/strong\u003e\u003cbr\u003e   yes\u003cbr\u003e   \u003cstrong\u003eInternal Effects\u003c\/strong\u003e\u003cbr\u003e   24 bit  stereo 16 effects\u003cbr\u003e   \u003cstrong\u003eEffects Send\u003c\/strong\u003e\u003cbr\u003e   2 (1  internal, 1 external)\u003cbr\u003e   \u003cstrong\u003eEffects Return to Main\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003eEffects Return to Monitor\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003eReverb \/ Effects Footswitch\u003c\/strong\u003e\u003cbr\u003e   Yes\u003cbr\u003e   \u003cstrong\u003eRecord Outputs\u003c\/strong\u003e\u003cbr\u003e   1 stereo  pair\u003cbr\u003e   \u003cstrong\u003eMixer - Signal to Noise Ratio (dB)\u003c\/strong\u003e\u003cbr\u003e   Greater Than  -100dB 20Hz - 20KHz\u003cbr\u003e   \u003cstrong\u003eMixer THD (Main out w\/ -10dB input)\u003c\/strong\u003e\u003cbr\u003e   Less Than  0.05%\u003cbr\u003e   \u003cstrong\u003eTypical crosstalk -1 kHz (dB-\u003c\/strong\u003e\u003cbr\u003e   Greater Than  -60dB\u003cbr\u003e   \u003cstrong\u003eCMRR @ 60Hz (min\/typ)\u003c\/strong\u003e\u003cbr\u003e   55dB\/65dB\u003cbr\u003e   \u003cstrong\u003ePower Consumption (typ\/max)\u003c\/strong\u003e\u003cbr\u003e   26VA  (typical)\u003cbr\u003e   \u003cstrong\u003eChassis Construction\u003c\/strong\u003e\u003cbr\u003e   Steel\u003cbr\u003e   \u003cstrong\u003eDimensions (DWH, inches)\u003c\/strong\u003e\u003cbr\u003e   14.2 x 12.8  x 2.8\u003cbr\u003e   \u003cstrong\u003eDimensions (DWH, cm)\u003c\/strong\u003e\u003cbr\u003e   36 x 32.5 x  7\u003cbr\u003e   \u003cstrong\u003eWeight (lbs\/kg)\u003c\/strong\u003e\u003cbr\u003e 8.5\/3.8\u003c\/p\u003e","brand":"Yorkville","offers":[{"title":"Default Title","offer_id":42511577841861,"sku":"YOR-PGM8","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/64815456-eeab-4d89-80eb-fd52b49a267a.jpg?v=1737569757"},{"product_id":"yorkville-vgm14-10-channel-compact-live-sound-mixer","title":"Yorkville VGM14 10 Channel Compact Live Sound Mixer","description":"\u003cp\u003e\u003cstrong\u003eYorkville VGM14 10 Channel Compact Live Sound Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Yorkville VGM14 delivers the essential features needed in a professional ultra-compact live sound mixer. All metal chassis design, effective fully featured input channel design, high quality 60mm faders throughout, 24-bit digital effects, and break switch make the VGM14 the perfect mixer for live music applications and for small installs. An IEC AC input (no proprietary adaptor or wall-wart required) for ultra reliable mobile operation. USB Audio I\/O, additional media inputs, two High Impedance instrument level inputs for acoustic guitars or bass offer maximum connectivity for various audio sources.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTen Mono Input Channels with XLR \u0026amp; ¼-inch TRS inputs\u003c\/li\u003e\n\u003cli\u003eChannel 9 \u0026amp; 10 Mono Inputs have a Hi-Z input switch\u003c\/li\u003e\n\u003cli\u003eTwo Additional stereo line input channels (11\/12 and 13\/14)\u003c\/li\u003e\n\u003cli\u003eAdditional XLR mono input per stereo channel for maximum 12 Mic inputs\u003c\/li\u003e\n\u003cli\u003eInput gain level control with Non-defeatable soft multi-slope compressor on every input\u003c\/li\u003e\n\u003cli\u003e3-band EQ with Sweep Mid, High Pass Filter, Monitor, Aux and Effect Send, Clip LED, Mute Switch and Pan control per Channel. 4-band EQ's on Stereo Channels\u003c\/li\u003e\n\u003cli\u003e60mm Faders Throughout\u003c\/li\u003e\n\u003cli\u003eGlobal 48 volt Phantom Power\u003c\/li\u003e\n\u003cli\u003eStereo 9-band graphic EQ Assignable Main\/Monitor\u003c\/li\u003e\n\u003cli\u003eStereo RCA Media Outputs with Level Control\u003c\/li\u003e\n\u003cli\u003eBREAK Switch (mutes all input channels)\u003c\/li\u003e\n\u003cli\u003eStereo RCA Media Input Jacks with Rotary Level Control (returns pre equalizer, post BREAK switch).\u003c\/li\u003e\n\u003cli\u003eUSB Audio I\/O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNumber of Channels\u003c\/strong\u003e\u003cbr\u003e 14\u003cbr\u003e \u003cstrong\u003eChannel Inserts\u003c\/strong\u003e\u003cbr\u003e 10\u003cbr\u003e \u003cstrong\u003eMono Channel EQ\u003c\/strong\u003e\u003cbr\u003e 3-Band w\/ mid Sweep\u003cbr\u003e \u003cstrong\u003eStereo Channel EQ\u003c\/strong\u003e\u003cbr\u003e 4-Band\u003cbr\u003e \u003cstrong\u003eBalance Controls\u003c\/strong\u003e\u003cbr\u003e 11\/12, 13\/14\u003cbr\u003e \u003cstrong\u003ePan Controls\u003c\/strong\u003e\u003cbr\u003e 1 to 10\u003cbr\u003e \u003cstrong\u003eChannel Overload Protection\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eInputs - XLR (bal)\u003c\/strong\u003e\u003cbr\u003e 12\u003cbr\u003e \u003cstrong\u003eInputs - 1\/4\"\u003c\/strong\u003e\u003cbr\u003e 14\u003cbr\u003e \u003cstrong\u003eInputs - RCA (unbal)\u003c\/strong\u003e\u003cbr\u003e 1 Stereo Pair\u003cbr\u003e \u003cstrong\u003eSolo Switches\u003c\/strong\u003e\u003cbr\u003e Yes - All Channels\u003cbr\u003e \u003cstrong\u003eMute Switches\u003c\/strong\u003e\u003cbr\u003e Yes - All Channels\u003cbr\u003e \u003cstrong\u003eHi Pass Switches\u003c\/strong\u003e\u003cbr\u003e Yes - All Channels\u003cbr\u003e \u003cstrong\u003eActivity \/ Solo LED\u003c\/strong\u003e\u003cbr\u003e Yes - All Channels\u003cbr\u003e \u003cstrong\u003eClip \/ Mute LED\u003c\/strong\u003e\u003cbr\u003e Yes - All Channels\u003cbr\u003e \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e 48 volt + LED indicator\u003cbr\u003e \u003cstrong\u003eInternal Effects\u003c\/strong\u003e\u003cbr\u003e 24 BIt'stereo \/ 16 Effects w\/ Modify Control\u003cbr\u003e \u003cstrong\u003eAuxiliary Sends\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eEffects Send\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eEffects Return\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eEffects Return to Main\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eEffects Return to Monitor\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eReverb \/ Effects Footswitch\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eRecord Outputs\u003c\/strong\u003e\u003cbr\u003e Yes (RCA and USB)\u003cbr\u003e \u003cstrong\u003eMax Gain to Line Out -Mic Input (dB)\u003c\/strong\u003e\u003cbr\u003e 80dB\u003cbr\u003e \u003cstrong\u003eMax Gain to Line Out -Line Input (dB)\u003c\/strong\u003e\u003cbr\u003e 65dB\u003cbr\u003e \u003cstrong\u003eMixer - Signal to Noise Ratio (dB) Greater than\u003c\/strong\u003e\u003cbr\u003e 100dB 20Hz - 20KHz\u003cbr\u003e \u003cstrong\u003eMixer- Input Ref Noise to line out @150 Ohms(dBv)\u003c\/strong\u003e\u003cbr\u003e -118dBv (@ 150 ohms)\u003cbr\u003e \u003cstrong\u003eMixer THD (Main out w\/ -10dB input)\u003c\/strong\u003e\u003cbr\u003e Less Than 0.05%\u003cbr\u003e \u003cstrong\u003eTypical crosstalk -1 kHz (dB-\u003c\/strong\u003e\u003cbr\u003e Less Than -60dB\u003cbr\u003e \u003cstrong\u003eCMRR @ 60Hz (min\/typ)\u003c\/strong\u003e\u003cbr\u003e 55dB\/65dB\u003cbr\u003e \u003cstrong\u003ePower Consumption (typ\/max)\u003c\/strong\u003e\u003cbr\u003e 26VA (typical)\u003cbr\u003e \u003cstrong\u003eCooling\u003c\/strong\u003e\u003cbr\u003e Fan\u003cbr\u003e \u003cstrong\u003eTransformer Type\u003c\/strong\u003e\u003cbr\u003e SMPS\u003cbr\u003e \u003cstrong\u003eChassis Construction\u003c\/strong\u003e\u003cbr\u003e Steel\u003cbr\u003e \u003cstrong\u003eConsole Lamp Connector 12V DC (BNC)\u003c\/strong\u003e\u003cbr\u003e Yes - 12V DC (BNC)\u003cbr\u003e \u003cstrong\u003eOther Features\u003c\/strong\u003e\u003cbr\u003e Zone Output, Hi-Z Inputs (Ch9\u0026amp;10) USB I\/O\u003cbr\u003e \u003cstrong\u003eDimensions (DWH, inches)\u003c\/strong\u003e\u003cbr\u003e 16 x 19 x 2.8\u003cbr\u003e \u003cstrong\u003eDimensions (DWH, cm)\u003c\/strong\u003e\u003cbr\u003e 40.6 x 48.3 x 7.1\u003cbr\u003e \u003cstrong\u003eWeight (lbs\/kg)\u003c\/strong\u003e\u003cbr\u003e 13\/5.9\u003c\/p\u003e\n\u003cp\u003e \u003cscript type=\"text\/javascript\" src=\"chrome-extension:\/\/hhojmcideegachlhfgfdhailpfhgknjm\/web_accessible_resources\/index.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e","brand":"Yorkville","offers":[{"title":"Default Title","offer_id":42511578104005,"sku":"YOR-VGM14","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/5c0a8907-70de-448c-ae23-58f1cef374e6.jpg?v=1737569872"},{"product_id":"toa-electronics-a-9060dhm2cu-2-channel-60-watt-digital-matrix-mixer","title":"TOA Electronics A-9060DHM2CU 2 Channel 60 Watt Digital Matrix Mixer","description":"\u003cp\u003e\u003cstrong\u003eTOA Electronics A-9060DHM2CU 2 Channel 60 Watt Digital Matrix Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A-9060DHM2 CU Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The more appropriate modules can be selected depending on applications. Since it comes with two 60W power amplifiers, it can individually perform multi-origin braodcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.\u003c\/p\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":42511578464453,"sku":"TOA-A9060DHM2CU","price":1425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/700f6f0b-681e-478f-b3cf-64c8d42929b2_cb34bd4f-9e90-41bc-a9ec-67796592c07e.jpg?v=1737568364"},{"product_id":"rolls-mx122-minimix-pro-mic-source-mixer","title":"Rolls MX122 MiniMix Pro Mic\/Source Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX122 MiniMix Pro Mic\/Source Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX122 is a five channel audio mixer which combines a  single microphone signal with four stereo instrument or line level signals. The  XLR Microphone input has a trim control and switchable +12 VDC phantom power  available. The unit is ideal for musicians needing to mix stereo keyboards and  sound modules with a single microphone.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 XLR Mic Input with rear panel Trim control, balanced     \u003c\/li\u003e\n\u003cli\u003e4 individual 1\/4” Stereo Inputs     \u003c\/li\u003e\n\u003cli\u003eBalanced 1\/4” TRS Outputs     \u003c\/li\u003e\n\u003cli\u003eBalance control on each channel (Pan on the Mic channel)     \u003c\/li\u003e\n\u003cli\u003eHeadphone \/ Auxiliary Outputs     \u003c\/li\u003e\n\u003cli\u003e+12VDC Phantom Power     \u003c\/li\u003e\n\u003cli\u003eExternal Power Supply included for low noise operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   \u003cstrong\u003eLine\u003c\/strong\u003e\u003cbr\u003e   10 K Ohms unbalanced\u003cbr\u003e   \u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e   10 K Ohms balanced\u003cbr\u003e   \u003cstrong\u003ePhantom Power Voltage\u003c\/strong\u003e\u003cbr\u003e   +12 VDC\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   50 Ohms balanced\u003cbr\u003e   \u003cstrong\u003eMax Input Level\u003c\/strong\u003e\u003cbr\u003e   +24 dBV line, -8 dBV microphone\u003cbr\u003e   \u003cstrong\u003ePhase Shift\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; 10 deg. 20 Hz - 20 kHz\u003cbr\u003e   \u003cstrong\u003eConnectors\u003c\/strong\u003e\u003cbr\u003e   8: 1\/4” TS Inputs, 1: XLR Mic Input, 3: 1\/4” TRS, 1: 1\/8”  (3.5mm) Outputs\u003cbr\u003e   \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e   26 dB Line, 26 dB Aux, 80 dB Mic\u003cbr\u003e   \u003cstrong\u003eMic CMRR\u003c\/strong\u003e\u003cbr\u003e   95 dB\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e   \u0026gt;90 dB\u003cbr\u003e   \u003cstrong\u003eTHD\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; .004%\u003cbr\u003e   \u003cstrong\u003eIMD (SMPTE)\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; .004%\u003cbr\u003e   \u003cstrong\u003eSelf Noise\u003c\/strong\u003e\u003cbr\u003e   \u0026lt; - 82 dB\u003cbr\u003e   \u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e   12 VDC\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   8.4” x 1.7” x 5”, (21.3 x 4.3 x 13 cm)\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e   2.5 lbs (1.14 kg)\u003cbr\u003e   \u003cstrong\u003eCurrent drain\u003c\/strong\u003e\u003cbr\u003e 40ma nominal one mic 15vdc\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511580397765,"sku":"RLS-MX122","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/e93ca250-133b-4fd7-9780-b71c736e8e24_f6470b7c-8873-4e75-bf44-99ea2c4b5940.jpg?v=1737480534"},{"product_id":"rolls-mx22s-mini-mix-2-channel-mixer","title":"Rolls MX22s Mini Mix 2 Channel Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX22s Mini Mix 2 Channel Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX22s is a 2 Channel mixer for mixing an 1\/8” line level  signal such as a laptop, phone or tablet, and a stereo RCA signal such as a CD  player, DAC or any preamp. The MX22s has plenty of output gain to drive any  power amplifier directly. It is ideal for audio visual applications or audio  mixing including studio applications. The MX22s can be configured as either  Stereo (default) or Mono. Power adapter is included.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8” and RCA line level signals     \u003c\/li\u003e\n\u003cli\u003eDual RCA Stereo output     \u003c\/li\u003e\n\u003cli\u003eIndividual controls for each channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCH1 Max Gain\u003c\/strong\u003e\u003cbr\u003e   32 dB\u003cbr\u003e   \u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e   15 VDC 500 mA\u003cbr\u003e   \u003cstrong\u003eCH2 Max Gain\u003c\/strong\u003e\u003cbr\u003e   20 dB\u003cbr\u003e   \u003cstrong\u003eCH1 Input Impedance\u003c\/strong\u003e\u003cbr\u003e   10 Ohms\u003cbr\u003e   \u003cstrong\u003eCHI Input Impedance\u003c\/strong\u003e\u003cbr\u003e   20K Ohms\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   50 Ohms\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   2.75” x 2.35” x 1.5” (7 x 6 x 3.8cm)\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 1 lb (.45Kg)\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511580725445,"sku":"RLS-MX22S","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/fd4a7068-92a7-4fbb-9476-e62bac062b92.jpg?v=1737480542"},{"product_id":"rolls-mx44-pro-4-channel-stereo-mixer","title":"Rolls MX44 Pro 4 Channel Stereo Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX44 Pro 4 Channel Stereo Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMX44 Pro 4 Channel Stereo Mixer. This unit is designed to mix up to four stereo line-level signals such as smart phones, instruments, CD players, DVD players, MP3 players, laptop computers, etc. to a single stereo output.\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511580922053,"sku":"RLS-MX44PRO","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/085e5d73-bc22-4a2a-bca7-4bc47d16560e_924f11dd-4f63-4a47-a501-503e3af8854f.jpg?v=1737480589"},{"product_id":"rolls-mx41b-4-channel-passive-stereo-mixer","title":"Rolls MX41b 4 Channel Passive Stereo Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX41b 4 Channel Passive Stereo Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX41b is a stereo four channel passive mixer for  expanding a console mixer, mixing instruments, CD players, cassette players,  computers etc. It requires no batteries or other power source. The unit may  also be used as a 1 In 4 Out stereo splitter box when all controls are set to  maximum.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour Stereo 1\/4” and 1\/8” Inputs     \u003c\/li\u003e\n\u003cli\u003eStereo 1\/4” and 1\/8” Outputs     \u003c\/li\u003e\n\u003cli\u003e100K Ohm Potentiometers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 Stereo Inputs\u003c\/strong\u003e\u003cbr\u003e   4: 1\/4” and 4: 1\/8”\u003cbr\u003e   Stereo 1\/4” and 1\/8” Outputs.\u003cbr\u003e   \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   10K to 47K Ohms\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   2.5K to 10K Ohms\u003cbr\u003e   \u003cstrong\u003eGain\u003c\/strong\u003e\u003cbr\u003e   -12 dB MAX\u003cbr\u003e   \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e   3.6” x 2.7” x 1.42” (W x H x D)\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 1 lb.\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511581085893,"sku":"RLS-MX41B","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/63d02784-b91e-434d-be27-52a6c58474fb.jpg?v=1737480575"},{"product_id":"rolls-mx34c-live-mix-2-channel-microphone-mixer","title":"Rolls MX34c Live Mix 2 Channel Microphone Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX34c Live Mix 2 Channel Microphone Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX34c LiveMix - two channel microphone mixer. Although  having many uses, this little mixer was originally designed with the video  camera operator in mind. The MX34c is a two channel microphone mixer with  balanced XLR inputs, phantom power, and stereo 1\/8” (3.5mm) outputs. The 3.5mm  output may be switched either mic or line level. It has a stereo 1\/8” (3.5mm)  Auxiliary input for connection to any stereo line-level source such as a phone,  tablet or CD player. A 3.5mm headset mic in on the front for narration. Each  channel has a Level and Pan control, and a separate headphone circuit allows  for monitoring all signals without effecting the main output signal. Holes for  a shoulder strap, easy-access controls, and smart Input\/Output jack placement  make the MX34c ideal for the live recording enthusiast.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9V Battery or AC adapter operation     \u003c\/li\u003e\n\u003cli\u003e2 Mic Inputs     \u003c\/li\u003e\n\u003cli\u003e+18VDC Phantom Power     \u003c\/li\u003e\n\u003cli\u003e3.5mm Stereo Output     \u003c\/li\u003e\n\u003cli\u003e3.5mm Stereo Headphone Output     \u003c\/li\u003e\n\u003cli\u003ePan control on each channel     \u003c\/li\u003e\n\u003cli\u003eAuxiliary 3.5mm Input     \u003c\/li\u003e\n\u003cli\u003e3.5mm mic in jack for headset or other mic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   Mic - 600 Ohms or greater (XLR), Aux - 47K stereo (3.5mm)\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   50 Ohms\u003cbr\u003e   \u003cstrong\u003eTHD + Noise\u003c\/strong\u003e\u003cbr\u003e   .02%\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e\u003cbr\u003e   110 dB\u003cbr\u003e   \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   20 Hz - 30 kHz (+0 \/ -1 dB)\u003cbr\u003e   \u003cstrong\u003eMax Output Level\u003c\/strong\u003e\u003cbr\u003e   + 14 dB\u003cbr\u003e   \u003cstrong\u003eMax Input Level\u003c\/strong\u003e\u003cbr\u003e   +20 dB\u003cbr\u003e   \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e   +70 dB\u003cbr\u003e   \u003cstrong\u003eBatteries\u003c\/strong\u003e\u003cbr\u003e   2 X 9V Alkaline\u003cbr\u003e   \u003cstrong\u003eCurrent Draw\u003c\/strong\u003e\u003cbr\u003e   30 mA\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   +18 VDC\u003cbr\u003e   \u003cstrong\u003eInput Connectors\u003c\/strong\u003e\u003cbr\u003e   2 Female XLR, 1\/8” (3.5mm)\u003cbr\u003e   \u003cstrong\u003eOutput connectors\u003c\/strong\u003e\u003cbr\u003e   3.5mm Stereo Main Out, 3.5mm Headphone\u003cbr\u003e   \u003cstrong\u003eDC Power Jack\u003c\/strong\u003e\u003cbr\u003e   (5.5mm X 2.1mm Tip Negative)\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   6.3”w x 3.7”d x 1.4”h\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e 1 lbs.\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511581184197,"sku":"RLS-MX34C","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/121dd410-9368-4bff-b52b-c6cb907bc426.jpg?v=1737480563"},{"product_id":"rolls-mx310-3-channel-microphone-mixer-combiner","title":"Rolls MX310 3 Channel Microphone Mixer\/Combiner","description":"\u003cp\u003e\u003cstrong\u003eRolls MX310 3 Channel Microphone Mixer\/Combiner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX310 is a professional three channel microphone mixer.  The mixer was originally designed for people that need to plug 2 or 3 more mics  into a mic input. With balanced XLR inputs, phantom power select able for each  mic input, XLR Mic or Line level output the MX310 can be used in many different  applications. A stereo 1\/8” (3.5mm) Auxiliary input has been added for  connection to any stereo line-level source such as a phone, AM\/FM tuner, CD  player etc. An additional 3.5mm stereo output jack is provided for connection  to a camera, computer, ear buds, or other monitoring.\u003c\/p\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   5.25” x 3.75” x 1.5”\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e   1 lbs.\u003cbr\u003e   \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   600 Ohms\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   600 Ohms Mic - 200 Ohms line\u003cbr\u003e   \u003cstrong\u003eTHD Noise\u003c\/strong\u003e\u003cbr\u003e   .05% Typical\u003cbr\u003e   \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   20 Hz - 20 kHz ( 0 \/ -3 dB)\u003cbr\u003e   \u003cstrong\u003eVoltage Gain\u003c\/strong\u003e\u003cbr\u003e   50 dB line\/10 dB Mic\u003cbr\u003e   \u003cstrong\u003eLow Cut\u003c\/strong\u003e\u003cbr\u003e   -3 dB @ 100 Hz\u003cbr\u003e   \u003cstrong\u003eCurrent Draw\u003c\/strong\u003e\u003cbr\u003e   20 mA\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   15 VDC\u003cbr\u003e   \u003cstrong\u003eMaximum Supply  Voltage\u003c\/strong\u003e\u003cbr\u003e 16 VDC\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511581511877,"sku":"RLS-MX310","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/fd5ca890-967d-42f0-892e-379f2d1d1404.jpg?v=1737480549"},{"product_id":"audac-mtx88-8-zone-audio-matrix","title":"Audac MTX88 8-Zone Audio Matrix","description":"\u003cp\u003e\u003cstrong\u003eAudac MTX88 8-Zone Audio Matrix\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MTX88 is the eight-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided where to any line-level music source such as a CD-player, Tuner or MP3 player, ... can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the iPhone\/ iPad Remote app. The RS232 port makes the MTX compatible with any home \u0026amp; industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScroll-Push control\u003c\/li\u003e\n\u003cli\u003eAUDAC Touch enabled\u003c\/li\u003e\n\u003cli\u003eIntegrated pre-listening loudspeaker with volume control\u003c\/li\u003e\n\u003cli\u003eIndividual zone control section (8x)\u003c\/li\u003e\n\u003cli\u003eRS-232 \u0026amp; Ethernet remote control connection\u003c\/li\u003e\n\u003cli\u003eWall panel connections (8x)\u003c\/li\u003e\n\u003cli\u003ePaging microphone connection - MPX48\u003c\/li\u003e\n\u003cli\u003ePriority mute connection\u003c\/li\u003e\n\u003cli\u003e24V emergency power input\u003c\/li\u003e\n\u003cli\u003eMic \/ line inputs with priority, 3-band EQ and phantom power (2x)\u003c\/li\u003e\n\u003cli\u003eUnbalanced stereo line inputs (4x)\u003c\/li\u003e\n\u003cli\u003eBalanced stereo zone outputs (8x)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrosstalk (@ 1 kHz)\u003c\/strong\u003e\u003cbr\u003e\n-85 dB\u003cbr\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e\u003cbr\u003e\nFront panel\u003cbr\u003e\nRS-232\u003cbr\u003e\nTCP\/IP (RJ45)\u003cbr\u003e\nWall panel (RS-485)\u003cbr\u003e\nAudac Touch\u003cbr\u003e\nWeb (Flash)\u003cbr\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n18.98 x 3.46 x 13.19” (W x H x D)\u003cbr\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e\n10.67 lb\u003cbr\u003e\n\u003cstrong\u003eUnit height\u003c\/strong\u003e\u003cbr\u003e\n2 HE\u003c\/p\u003e","brand":"Audac","offers":[{"title":"Default Title","offer_id":42511582036165,"sku":"AUDA-MTX88-AUMTX88","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1mtx88__41294-scaled.jpg?v=1706849907"},{"product_id":"rolls-mx54s-promix-plus-3-channel-microphone-mixer","title":"Rolls MX54s ProMix Plus 3 Channel Microphone Mixer","description":"\u003cp\u003e\u003cstrong\u003eRolls MX54s ProMix Plus 3 Channel Microphone Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MX54s Pro-Mix Plus mixes three microphones into two  transformer balanced outputs. It has three XLR inputs, each with individually  switchable phantom power, and Low Cut (100 Hz high pass filter) switches, a  Level control, and a Pan control. As mentioned, it has two transformer  balanced, XLR outputs. A 1\/4 inch Aux\/Headphone output has been provided along  with a Clip indicator, Power indicator, and Power switch. The unit is also  powered by two 9-Volt alkaline batteries.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixes three microphones to stereo XLR outputs     \u003c\/li\u003e\n\u003cli\u003eOutput level controls for mic or line-level output     \u003c\/li\u003e\n\u003cli\u003eTransformer isolated outputs     \u003c\/li\u003e\n\u003cli\u003ePhantom Power and Low-Cut switches for each Mic input     \u003c\/li\u003e\n\u003cli\u003eBattery and AC powered     \u003c\/li\u003e\n\u003cli\u003eHandy shoulder strap mounts     \u003c\/li\u003e\n\u003cli\u003eSwitchable Low Cut filter (100 Hz high pass) for each  channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e   600 Ohms\u003cbr\u003e   \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e   XLR 600 Ohms\u003cbr\u003e   \u003cstrong\u003eTHD + Noise\u003c\/strong\u003e\u003cbr\u003e   .02%\u003cbr\u003e   \u003cstrong\u003eS\/N Ratio:\u003c\/strong\u003e\u003cbr\u003e   84 dB\u003cbr\u003e   \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e   25 Hz - 16 kHz (+0 \/ -3 dB)\u003cbr\u003e   \u003cstrong\u003eMax Output Level\u003c\/strong\u003e\u003cbr\u003e   + 14 dB\u003cbr\u003e   \u003cstrong\u003eMax Input Level\u003c\/strong\u003e\u003cbr\u003e   -14 dB\u003cbr\u003e   \u003cstrong\u003eMax Gain\u003c\/strong\u003e\u003cbr\u003e   +60 dB\u003cbr\u003e   \u003cstrong\u003eLow Cut\u003c\/strong\u003e\u003cbr\u003e   -3 dB @ 100 Hz\u003cbr\u003e   \u003cstrong\u003eCurrent Draw\u003c\/strong\u003e\u003cbr\u003e   20 mA\u003cbr\u003e   \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e   +18 VDC\u003cbr\u003e   \u003cstrong\u003eConnectors\u003c\/strong\u003e\u003cbr\u003e   3: Female XLR, 2: Male XLR, 1: 1\/4” TRS, DC Power Jack\u003cbr\u003e   \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e   5.3” x 3.7” x 2”\u003cbr\u003e   \u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e   1 lbs.\u003cbr\u003e Current drain 15ma nominal one mic 15vdc\u003c\/p\u003e","brand":"Rolls","offers":[{"title":"Default Title","offer_id":42511582167237,"sku":"RLS-MX54S","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/f0489b7f-8f97-4c7a-a9d2-414ea300ff4a.jpg?v=1737480599"}],"url":"https:\/\/avlgear.com\/collections\/commercial-mixers-dsp.oembed?page=2","provider":"AVLGEAR","version":"1.0","type":"link"}