{"title":"Commercial Network Audio","description":"","products":[{"product_id":"rdl-ru-lb4p-line-level-bi-directional-network-interface","title":"RDL RU-LB4P Line-Level Bi-Directional Network Interface","description":"\u003cp\u003e\u003cstrong\u003eRDL RU-LB4P Line-Level Bi-Directional Network Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION\u003cbr\u003e The RU-LB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources to Dante network audio channels.\u003c\/p\u003e\n\u003cp\u003eNetwork to Line Level Interface Section\u003cbr\u003e The RU-LB4 converts four Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level.\u003c\/p\u003e\n\u003cp\u003eOne front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.\u003c\/p\u003e\n\u003cp\u003eLine Level to Network Interface Section\u003cbr\u003e The RU-LB4 converts four line-level audio sources to Dante networked digital audio channels. Each input is equipped with a front-panel gain trimmer and associated Dual-LED VU meter to facilitate optimal input gain adjustment. Each input supports the complete range of normal unbalanced -10 dBV and balanced +4 dBu line-level sources. Input gain adjusted according to the Dual-LED VU meter assures an operating level that preserves full headroom with the lowest noise floor.\u003c\/p\u003e\n\u003cp\u003eThe RU-LB4 is powered from an external 24 Vdc power supply, available separately. The RU-LB4P is equipped to operate from a PoE enabled network switch. The RU-LB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.\u003c\/p\u003e\n\u003cp\u003eThe RU-LB4’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.\u003c\/p\u003e\n\u003cp\u003eThe RU-LB4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Standard Line-Level Audio Sources to Dante Network Channels \u003c\/li\u003e\n\u003cli\u003eLine-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with \u0026gt;18 dB Headroom \u003c\/li\u003e\n\u003cli\u003eFront-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input \u003c\/li\u003e\n\u003cli\u003eConverts Four Dante Network Audio Signals to Balanced Line Level \u003c\/li\u003e\n\u003cli\u003eLine-Level Outputs Provide +4 dBu with \u0026gt;18 dB Headroom \u003c\/li\u003e\n\u003cli\u003eSignal LEDs Indicate Audio for Each of the Received Network Signal Channels \u003c\/li\u003e\n\u003cli\u003eInterfaces Four Dante Inputs and Four Dante Outputs \u003c\/li\u003e\n\u003cli\u003eHigh Resolution 24 Bit Analog to Digital and Digital to Analog Conversion \u003c\/li\u003e\n\u003cli\u003eLegendary RDL Analog Filtering Enhances Superb Audio Performance \u003c\/li\u003e\n\u003cli\u003eLED Indicators Show Network Sync Status \u003c\/li\u003e\n\u003cli\u003eNormal or Hot-Standby Operation from PoE (Model RU-LB4P) \u003c\/li\u003e\n\u003cli\u003eEquipped for Rack Mounting or Surface Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connector\u003c\/strong\u003e\u003cbr\u003e RJ45 with Link and Speed indicators\u003cbr\u003e \u003cstrong\u003eDigital Audio Ethernet Protocol\u003c\/strong\u003e\u003cbr\u003e Dante\u003cbr\u003e \u003cstrong\u003eTransmission Rate\u003c\/strong\u003e\u003cbr\u003e 100 Mbps\u003cbr\u003e \u003cstrong\u003eSample Rates Supported\u003c\/strong\u003e\u003cbr\u003e 44.1 kHz, 48 kHz (default)\u003cbr\u003e \u003cstrong\u003eBit Depth Supported\u003c\/strong\u003e\u003cbr\u003e 24 bits\u003cbr\u003e \u003cstrong\u003eAudio Operating Levels\u003c\/strong\u003e\u003cbr\u003e -18 dBFS = +4 dBu\u003cbr\u003e \u003cstrong\u003eLine Inputs to Network Interface Section\u003c\/strong\u003e\u003cbr\u003e Inputs (4)\u003cbr\u003e \u003cstrong\u003eBalanced, detachable terminal block\u003c\/strong\u003e\u003cbr\u003e Input Level for +4 dBu\u003cbr\u003e -16 dBu to +12 dBu, +22 dBu maximum\u003cbr\u003e \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e \u0026gt; 20 kOHM\u003cbr\u003e \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e 20 Hz to 20 kHz (+\/- 0.5 dB)\u003cbr\u003e \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e \u0026lt; 0.05%\u003cbr\u003e \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e \u0026lt; -80 dB\u003cbr\u003e \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e \u0026gt; 60 dB (50 Hz to 120 Hz)\u003cbr\u003e \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e \u0026lt; 85 dB (20 Hz to 20 kHz)\u003cbr\u003e \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e \u0026gt; 18 dB\u003cbr\u003e Network to Line Level Interface Section\u003cbr\u003e \u003cstrong\u003eOutputs (4)\u003c\/strong\u003e\u003cbr\u003e Balanced, detachable terminal block\u003cbr\u003e \u003cstrong\u003eOutput Level\u003c\/strong\u003e\u003cbr\u003e +4 dBu (nominal)\u003cbr\u003e \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e 150 OHM balanced; 75 OHM unbalanced\u003cbr\u003e \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e 20 Hz to 20 kHz (+\/- 0.5 dB)\u003cbr\u003e \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e \u0026lt; 0.05%\u003cbr\u003e \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e \u0026lt; -80 dB (output active); \u0026lt; -95 dB (outputs muted)\u003cbr\u003e \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e \u0026lt; 85 dB (20 Hz to 20 kHz)\u003cbr\u003e \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e \u0026gt; 18 dB\u003cbr\u003e Indicators (17)\u003cbr\u003e Power In (1); Output Signal LEDs (4); Input Dual-LED VU Meters (8); Network Sys and Sync (2), Ethernet Link and Speed (2)\u003cbr\u003e Power Connections (2)\u003cbr\u003e Power Jack; Detachable Terminal Block\u003cbr\u003e \u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003cbr\u003e 0 C to 40 C\u003cbr\u003e \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e 24 Vdc @ 140 mA plus connected loads, or PoE (RU-LB4P)\u003cbr\u003e \u003cstrong\u003ePoE (RU-LB4P)\u003c\/strong\u003e\u003cbr\u003e Class 0, IEEE 802.3af\u003cbr\u003e \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e 5.8\" (15 cm) W; 1.7\" (4.3 cm) H; 5.2\" (13.2 cm) D\u003cbr\u003e \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e Cardboard Box\u003cbr\u003e \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e 6 x 6 x 2.625 in.\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42509920370885,"sku":"RDL-RULB4P","price":870.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/f4a7f655-1b23-4014-9936-076202395a42.jpg?v=1737420035"},{"product_id":"rdl-sf-nd2-network-to-digital-audio-interface","title":"RDL SF-ND2 Network to Digital Audio Interface","description":"\u003cp\u003e\u003cstrong\u003eRDL SF-ND2 Network to Digital Audio Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES\/EBU on XLR, or coaxial and optical S\/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.\u003cbr\u003e The SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003cbr\u003e The SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eConverts Two Dante Network Audio Signals to Left\/Right Digital Audio\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAES\/EBU or S\/PDIF Coaxial or Optical Output\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSelectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Audio Output Sample Rate Equals Dante Sample Rate\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTransformer-Isolated AES\/EBU Output\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDante Audio Signals Remain in the Digital Domain through the Output\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLED Indicator for Valid Power and Network Sync\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOperation from PoE Power (Class 0, IEEE 802.3af)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEquipped for SysFlex Rack Mounting or Surface Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eNetwork Connector: RJ45 with Link and Speed indicators\u003cbr\u003e Digital Audio Ethernet Protocol: Dante\u003cbr\u003e Transmission Rate: 100 Mbps\u003cbr\u003e Sample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz\u003cbr\u003e Bit Depth Supported: 24 bits \u003cbr\u003e Outputs (3): 110 ohms AES\/EBU XLR, transformer isolated; 75 ohms S\/PDIF RCA jack; S\/PDIF optical (selectable)\u003cbr\u003e Indicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)\u003cbr\u003e Ambient Operating Environment: 0° C to 50° C\u003cbr\u003e Power Requirement: PoE Class 0, IEEE 802.3af\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42510786592965,"sku":"RDL-INTRFCE-SFND2","price":506.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/f5b69e7b-cc37-4eab-92c7-255536706a5c.jpg?v=1737419987"},{"product_id":"rdl-sf-nl2-network-to-audio-interface","title":"RDL SF-NL2 Network to Audio Interface","description":"\u003cp\u003e\u003cstrong\u003eRDL SF-NL2 Network to Audio Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The SF-NL2 is a professional grade product for studio quality fidelity and low noise performance.\u003cbr\u003e The SF-NL2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003cbr\u003e The SF-NL2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eConverts Two Dante Network Audio Signals to Balanced Analog\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSelectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEach Output Switch-Selectable for Mic or Line Level\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eNormal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eMicrophone Output Level is Attenuated 50 dB\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEach Output is Protected Against Phantom Voltage up to 48 Vdc\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eExceptional Low-Noise and Low-Distortion Performance\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHigh Resolution 24 Bit Digital to Analog Conversion\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLegendary RDL Analog Filtering Enhances Superb Audio Performance\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLED Indicator for Valid Power and Network Sync\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOperation from PoE Power (Class 0, IEEE 802.3af)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEquipped for SysFlex Rack Mounting or Surface Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eNetwork Connector: RJ45 with Link and Speed indicators\u003cbr\u003e Digital Audio Ethernet Protocol: Dante\u003cbr\u003e Transmission Rate: 100 Mbps\u003cbr\u003e Sample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz\u003cbr\u003e Bit Depth Supported: 24 bits\u003cbr\u003e Audio Operating Level: -20 dBFS = +4 dBu\u003cbr\u003e Reference Level: 0 dBFS = +24 dBu\u003cbr\u003e Outputs (2): XLR (male)\u003cbr\u003e Output Level (operating): +4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 ohms)\u003cbr\u003e Output Level (maximum): +24 dBu LINE level\u003cbr\u003e Output Impedance: \u0026lt; 100 ohms balanced\u003cbr\u003e Selector per output: Mic\/Line\u003cbr\u003e Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)\u003cbr\u003e THD+N: \u0026lt; 0.1% (20 Hz to 20 kHz, +4 dBu\/-20 dBFS); 0.015% at 1 kHz (typ)\u003cbr\u003e Noise: \u0026lt; -75 dB (below +4 dBu); \u0026lt; -95 (below +24 dBu)\u003cbr\u003e Crosstalk: Below Noise Floor (1 kHz, output to output); \u0026lt; -60 d5 dB (20 kHz)\u003cbr\u003e Headroom above +4 dBu\/-20 dBFS: 20 dB\u003cbr\u003e Indicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)\u003cbr\u003e Ambient Operating Environment: 0° C to 50° C\u003cbr\u003e Power Requirement: PoE Class 0, IEEE 802.3af\u003cbr\u003e Specification Conditions: Gain\/Level: ± 1 dB\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42510786691269,"sku":"RDL-INTRFCE-SFNL2","price":440.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/95a5549d-607a-4468-a64a-9533e57483e9.jpg?v=1737419991"},{"product_id":"rdl-sf-dn4-digital-audio-to-network-interface","title":"RDL SF-DN4 Digital Audio to Network Interface","description":"\u003cp\u003e\u003cstrong\u003eRDL SF-DN4 Digital Audio to Network Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S\/PDIF optical, S\/PDIF coaxial, or AES\/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional grade product for studio quality performance.\u003cbr\u003e The SF-DN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003cbr\u003e The SF-DN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eConverts Two Left\/Right Digital Audio Sources to Four Dante Network Audio Signals\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAES\/EBU or S\/PDIF Coaxial or Optical Inputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSupports Input Sampling Rates from 44.1 kHz to 192 kHz\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSelectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Signal Lock Indicator for Valid Inputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTransformer-Isolated AES\/EBU Input\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Audio Sources Remain in the Digital Domain through the Dante Network Output\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSpecial Software Not Required for Module Setup\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eLED Indicator for Valid Power and Network Sync\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eOperation from PoE Power (Class 0, IEEE 802.3af)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eEquipped for SysFlex Rack Mounting or Surface Mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003eNetwork Connector:RJ45 with Link and Speed indicators\u003cbr\u003e Digital Audio Ethernet Protocol:Dante\u003cbr\u003e Transmission Rate:100 Mbps\u003cbr\u003e Input Sample Rates Supported:32 kHz to 192 kHz\u003cbr\u003e Output (Dante) Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz\u003cbr\u003e Bit Depth Supported:24 bits \u003cbr\u003e Inputs (6):110 ohms AES\/EBU XLR, transformer isolated (2); 75 ohms S\/PDIF RCA jack (2); S\/PDIF optical (2)\u003cbr\u003e Indicators (5):Ethernet Link and Speed (2, rear panel); Sync (front panel); Lock (2, front panel)\u003cbr\u003e Ambient Operating Environment:0° C to 50° C\u003cbr\u003e Power Requirement:PoE Class 0, IEEE 802.3af\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42510786756805,"sku":"RDL-INTRFCE-SFDN4","price":774.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/38daf1fb-a51e-4b59-af52-a76b2580ddb3.jpg?v=1737419983"},{"product_id":"bss-blu-326-input-output-expander-with-blu-link-dante","title":"BSS BLU-326 Input Output Expander with BLU Link Dante","description":"\u003cp\u003e\u003cstrong\u003eBSS BLU-326 Input Output Expander with BLU Link Dante\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"description\"\u003eThe Soundweb London BLU-326 offers configurable I\/O, Dante audio, and a high bandwidth, fault tolerant digital audio bus.\u003cbr\u003e The BLU-326 is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.\u003cbr\u003e This processor features Dante audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.\u003cbr\u003e The BLU-326 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.\u003cbr\u003e The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.\u003cbr\u003e The BLU-326 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullets\"\u003eFour Input \/ Output Card Slots\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfigurable Inputs \/ Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAnalog Outputs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Inputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDigital Outputs (AES\/EBU and S\/PDIF)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eAEC Inputs (with Phantom Power per Channel)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eTelephone Hybrid Card\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eRich Palette of Logic Objects\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eDante Audio\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e256 Channel, Low Latency, Fault Tolerant Digital Audio Bus\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eClear Front Panel LED Indication\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eInformative Front Panel Display\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eBi-Directional Locate Functionality\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e12 Control Inputs and 6 Logic Outputs for GPIO Integration\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eSoundweb London Interface Kit for Third Party Control System\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eIntegration (Documentation)\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eHiQnet Device\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eConfiguration, Control and Monitoring from HiQnet London Architect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp class=\"description\"\u003e\u003cstrong\u003eFront Panel Led Indicators:\u003c\/strong\u003e\u003cbr\u003e Per Input: Signal Present, CLIP, SYNC\/48V, I\/O card type (IN, OUT, DIG, AEC)\u003cbr\u003e Other: LCD Display, Conductor active, Network Link active,Data Activity\u003cbr\u003e \u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix Combicon removable screw connectors\u003cbr\u003e Mic\/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps\u003cbr\u003e Input Impedance: 3.5kΩ\u003cbr\u003e Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain\u003cbr\u003e CMRR: \u0026gt;75dB at 1KHz\u003cbr\u003e Input Noise (E.I.N.): \u0026lt;-128dBu typical with 150Ω source\u003cbr\u003e Phantom Power: 48V nominal, selectable per input\u003cbr\u003e A\/D Latency: 38.7\/Fs\u003cbr\u003e \u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Input Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e \u003cstrong\u003eAnalog Outputs:\u003c\/strong\u003e Up to 16 electronically balanced on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Maximum Output Level: +19dBu\u003cbr\u003e Frequency Response: 20Hz-20KHz (+0.5dB\/-1dB)\u003cbr\u003e THD: \u0026lt;0.01% 20Hz to 20KHz, +10dBu output\u003cbr\u003e Dynamic Range: 108dB typical, 22Hz-22KHz unweighted\u003cbr\u003e Crosstalk: \u0026lt;-75dB\u003cbr\u003e D\/A Latency: 28\/Fs\u003cbr\u003e \u003cstrong\u003eDigital Outputs:\u003c\/strong\u003e Up to 16 AES\/EBU or S\/PDIF on Phoenix\/Combicon removable screw connectors\u003cbr\u003e Output Impedance: 110 ohm (AES\/EBU), 75 ohm (S\/PDIF)\u003cbr\u003e Sample Rate: 48kHz or 96kHz\u003cbr\u003e Sample Rate Conversion: 8kHz-96kHz\u003cbr\u003e THD+N: \u0026lt;-140dB\u003cbr\u003e Latency: 3\/Fso + (56.581\/Fsi) + (55.658\/Fso)\u003cbr\u003e \u003cstrong\u003eDante Audio Network:\u003c\/strong\u003e\u003cbr\u003e Connectors: 2 x RJ45 connectors\u003cbr\u003e Maximum Cable Length: 100m\/300ft on Category 5e cable between device and Ethernet switch or router\u003cbr\u003e \u003cstrong\u003ePower and Dimensions:\u003c\/strong\u003e\u003cbr\u003e Mains Voltage: 100-240V AC, 50\/60Hz\u003cbr\u003e Power Consumption: \u0026lt;35VA\u003cbr\u003e BTU Rating: \u0026lt;188 BTU\/hr\u003cbr\u003e Operating Temperature Range: 15 (59) to 35 (95) degrees C (degrees F)\u003cbr\u003e Dimensions (H(U) x W x D): 1.75\" (1U) x 19\" x 12.5\" (45mm x 483mm x 318mm)\u003cbr\u003e Weight: 9 lbs \/ 4.1 kgs (estimated)\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\"\u003e\u003c\/p\u003e","brand":"BSS","offers":[{"title":"Default Title","offer_id":42510812643525,"sku":"BSS-SIGPRSS-BLU326","price":5973.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1blu326__20954.jpg?v=1706839151"},{"product_id":"rane-rad16z-halogen-interface-with-dual-inputs-dual-outputs","title":"Rane RAD16z Halogen Interface with Dual Inputs \/ Dual Outputs","description":"\u003cp\u003e\u003cstrong\u003eRane RAD16z Halogen Interface with Dual Inputs \/ Dual Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RAD16z is an alternative to standard switch boxes forimpractical areas such as in stage floor pockets or above ceilings. Its formfactor is a rugged metal box with flexible surface mounting options. The RAD16zis plenum-rated UL 2043. It contains two balanced Mic \/ Line \/ Line-Plus inputsand two balanced line outputs on Euroblock connectors. Line-Plus allows anunbalanced stereo source to connect to a single balanced input and be mono’ed.Inputs are individually software switchable to Mic, Line or Line-Plus. TheHalogen software can enable 24V phantom power for a condenser mic on eitherinput. LEDs indicate input mode, Input and Output level, as well as RAD connectivityto the HAL.\u003c\/p\u003e\n\u003cp class=\"keyfeatures\"\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlenum-rated 2-ch I\/O box with logic, single shielded CAT5eor better for up to 500 feet maximum distance \u003c\/li\u003e\n\u003cli\u003eAlternative to standard switch boxes for impractical areassuch as floor pockets or above ceilings \u003c\/li\u003e\n\u003cli\u003e2 balanced Mic \/ Line \/ Line-Plus inputs and 2 balanced lineoutputs on Euroblock connectors \u003c\/li\u003e\n\u003cli\u003e2 Logic Inputs and Outputs interface other devices to HALwith toggles or commands, such as push-to-talk or mute switches, projectors,lights, alarms, etc. \u003c\/li\u003e\n\u003cli\u003ePower on\/off transient suppression \u003c\/li\u003e\n\u003cli\u003e500 V galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rane","offers":[{"title":"Default Title","offer_id":42511583346885,"sku":"RANE-RAD16Z-RAD16ZIM","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/ed155869-b886-4a12-a42c-75a52d0d9bcc.jpg?v=1737419418"},{"product_id":"klark-teknik-dw-20r-2-4-ghz-wireless-stereo-receiver-for-high-performance-stereo-audio-broadcasting","title":"Klark Teknik DW 20BR Bluetooth Wireless Stereo Receiver","description":"\u003c!-- Content --\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKlark Teknik DW 20BR Bluetooth Wireless Stereo Receiver\u003c\/h2\u003e\n\u003cp\u003eStream full-range stereo audio from any Bluetooth device straight into your installed sound system. The compact DW 20BR (Air Link series) pairs quickly, offers both balanced XLR and unbalanced 1\/4\" outputs, and delivers a clean, high-headroom signal with low distortion and industry-grade signal-to-noise performance. Ideal for restaurants, retail spaces, houses of worship, events and small venue installations.\u003c\/p\u003e\n\u003cp\u003eDesigned for simple setup and reliable daily use, the DW 20BR features an intuitive PAIR button with status LED, a LEVEL control for output gain, and an articulating antenna to maximize range. It supports aptX where available for improved Bluetooth audio quality and reconnects automatically to the last paired device for hassle-free operation.\u003c\/p\u003e\n\u003cp\u003eSmall, rugged and installation friendly, the DW 20BR is built to integrate with mixers, powered speakers and amplifiers — bringing modern wireless convenience to professional audio systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Bluetooth stereo receiver for installed audio systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e Balanced XLR and unbalanced 1\/4\" TS outputs (left \u0026amp; right stereo outputs).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e Bluetooth Version 4.2 with support for SBC and aptX codecs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e Up to 30 m \/ ~100 ft line-of-sight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e PAIR button with LED status ring; front-mounted LEVEL knob\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 12 V DC, 400 mA (center positive) — included power adaptor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e Multiple dimension options (with\/without bumpers \u0026amp; antenna) for flexible mounting\/placement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable audio:\u003c\/strong\u003e High headroom, low distortion and \u0026gt;90 dB SNR for clean playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse cases:\u003c\/strong\u003e Hospitality, retail, event spaces, small venue installations, FOH\/aux input for sound systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance \u0026amp; safety:\u003c\/strong\u003e Built to applicable regulatory directives and safety standards (manufacturer compliance declared)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs — Connectors:\u003c\/strong\u003e Balanced XLR; unbalanced 1\/4\" TS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs — Impedance:\u003c\/strong\u003e 240 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output level:\u003c\/strong\u003e 4 dBu @ 1 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Frequency Range:\u003c\/strong\u003e 2402 – 2480 MHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Channels:\u003c\/strong\u003e 79.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Version:\u003c\/strong\u003e 4.2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Range:\u003c\/strong\u003e Up to 30 m (100 ft) line-of-sight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e Class 2, \u0026lt; 10 dBm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Codecs:\u003c\/strong\u003e SBC, aptX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Profiles:\u003c\/strong\u003e AVRCP 1.4, A2DP 1.2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20 Hz – 20 kHz (+0 \/ -2 dB).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD + N:\u003c\/strong\u003e 0.1% @ 1 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio:\u003c\/strong\u003e \u0026gt; 90 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Adaptor:\u003c\/strong\u003e 12 V DC, 400 mA, center-positive (included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Dimensions (H × W × D):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eWithout bumpers or antenna: 54 × 108 × 103 mm (2.1\" × 4.3\" × 4.1\") — 5.4 × 10.8 × 10.3 cm\u003c\/li\u003e\n\u003cli\u003eWith bumpers, without antenna: 63 × 118 × 112 mm (2.5\" × 4.6\" × 4.4\") — 6.3 × 11.8 × 11.2 cm\u003c\/li\u003e\n\u003cli\u003eWith bumpers, upright antenna: 212 × 118 × 126 mm (8.3\" × 4.6\" × 5.0\") — 21.2 × 11.8 × 12.6 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (incl. bumpers \u0026amp; antenna):\u003c\/strong\u003e 1.3 lbs (0.5897 kg) — manufacturer rounds to 0.6 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e The 1\/4\" output level is specified as 6 dB lower than the XLR outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Ambient Temperature:\u003c\/strong\u003e Up to 45°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegulatory \/ Compliance:\u003c\/strong\u003e Manufacturer declares compliance with EU directives and includes FCC RF statements (see manual for details).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDW 20BR unit\u003c\/li\u003e\n\u003cli\u003e12 V DC power adaptor, 400 mA, center positive (included according to manufacturer documentation)\u003c\/li\u003e\n\u003cli\u003eUser Guide \/ Quick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klark Teknik","offers":[{"title":"Default Title","offer_id":42511789359301,"sku":"KT-DW20R","price":76.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/163de281-a53e-495a-a1ef-2592f43e53dc.jpg?v=1737115665"},{"product_id":"soundtube-stnet-switch-ii-stnet-switch-ii","title":"SoundTube STNET-SWITCH-II STNet-Switch II","description":"\u003cp\u003e\u003cstrong\u003eSoundTube STNET-SWITCH-II STNet-Switch II\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRack mountable 16-port 40 W PoE per port audio quality switch designed for use in Dante Networks. In addition to the 16 Ethernet ports, the STNet-Switch II includes two SFP ports that can be adapted to fiber or high speed Ethernet connections. The two SFP ports can be turned into a high speed optical fiber ports or copper Ethernet ports with the addition of a GigabIt'sFP transceiver module.\u003c\/p\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10M\/100M\/1G RJ45 Port\u003c\/strong\u003e\u003cbr\u003e QTY 16.\u003cbr\u003e \u003cstrong\u003e100M\/1G SFP Port\u003c\/strong\u003e\u003cbr\u003e QTY 2\u003cbr\u003e \u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003cbr\u003e -20C to 70C\u003cbr\u003e \u003cstrong\u003eAvailable PoE Power\u003c\/strong\u003e\u003cbr\u003e 640 W\u003cbr\u003e \u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003cbr\u003e 0C to 40C\u003cbr\u003e \u003cstrong\u003eOperating Humidity\u003c\/strong\u003e\u003cbr\u003e 10 to 90% RH\u003cbr\u003e \u003cstrong\u003eStorage Humidity\u003c\/strong\u003e\u003cbr\u003e 10 to 90% RH\u003cbr\u003e \u003cstrong\u003eAC Input\u003c\/strong\u003e\u003cbr\u003e 100V-240V\u003cbr\u003e \u003cstrong\u003eDepth\u003c\/strong\u003e\u003cbr\u003e 8.3 in \/ 210.82 mm\u003cbr\u003e \u003cstrong\u003eHeight\u003c\/strong\u003e\u003cbr\u003e 1.73 in \/ 43.94 mm\u003cbr\u003e \u003cstrong\u003eWidth\/Diameter\u003c\/strong\u003e\u003cbr\u003e 17.4 in \/ 441.96 mm\u003cbr\u003e \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e 7.71\u003cbr\u003e \u003cstrong\u003eCertifications\u003c\/strong\u003e\u003cbr\u003e CE, RoHS, ETL-C\/US, FCC\u003cbr\u003e \u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e\u003cbr\u003e Power Supply\u003cbr\u003e \u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e 110-240 VAC 50\/60 Hz\u003cbr\u003e \u003cstrong\u003eMagnetically Boosted\u003c\/strong\u003e\u003cbr\u003e No\u003c\/p\u003e","brand":"SoundTube","offers":[{"title":"Default Title","offer_id":42511795617989,"sku":"SOUNT-STNETSWITCHII","price":1543.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/53644112-9e3d-4dbf-8ace-455a47a2c237.jpg?v=1737496627"},{"product_id":"rdl-tx-tpr1a-active-single-pair-receiver-twisted-pair-format-a-balanced-line-output","title":"RDL TX-TPR1A Active Single-Pair Receiver, Twisted Pair Format-A, Balanced Line Output","description":"\u003cp\u003e\u003cstrong\u003eRDL TX-TPR1A Active Single-Pair Receiver, Twisted Pair Format-A, Balanced Line Output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio-quality buffer amplifier feeds the outputs at the correct operating level.\u003c\/p\u003e\n\u003cp\u003eThe TX-TPR1A is a single-pair receiver, bridging the input signal from the cable pair set on the front-panel switch during installation. Because this module receives only one cable pair, a LOOP OUT RJ45 jack is provided for connecting additional Format-A receivers. Two other single-pair receivers may be chained to the LOOP OUT jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through from the INPUT jack to the LOOP OUT jack.\u003c\/p\u003e\n\u003cp\u003eThe TX-TPR1A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT and LOOP OUT RJ45 jacks. The TX-TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle -10 dBV Unbalanced or +4 dBu Balanced Output \u003c\/li\u003e\n\u003cli\u003ePhono Jack and Detachable Terminal Block Outputs \u003c\/li\u003e\n\u003cli\u003eSwitch Selects which Pair (A, B or C) Feeds the Output \u003c\/li\u003e\n\u003cli\u003eSignal and Power Pair Pass-Through to LOOP OUT Jack \u003c\/li\u003e\n\u003cli\u003ePowered Locally or Remotely through RJ45 Jack \u003c\/li\u003e\n\u003cli\u003eFused Local Power Feeds all Modules Connected to RJ45s \u003c\/li\u003e\n\u003cli\u003eLocal Power Input on Terminal Block or dc Power Jack \u003c\/li\u003e\n\u003cli\u003eBlue LED Indicates Module is Powered \u003c\/li\u003e\n\u003cli\u003eDaisy-Chain with Additional Format-A Receivers \u003c\/li\u003e\n\u003cli\u003eStudio-Quality Precision Active Balanced Circuitry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003cbr\u003e 2.1”\u003cbr\u003e \u003cstrong\u003eDepth (mm)\u003c\/strong\u003e\u003cbr\u003e 53.086\u003cbr\u003e \u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003cbr\u003e Rack Mount\u003cbr\u003e \u003cstrong\u003eHeight\u003c\/strong\u003e\u003cbr\u003e 1.6”\u003cbr\u003e \u003cstrong\u003eHeight (mm)\u003c\/strong\u003e\u003cbr\u003e 40.64\u003cbr\u003e \u003cstrong\u003eWidth\u003c\/strong\u003e\u003cbr\u003e 3”\u003cbr\u003e \u003cstrong\u003eWidth (mm)\u003c\/strong\u003e\u003cbr\u003e 76.2\u003cbr\u003e \u003cstrong\u003eMiscellaneous\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003cbr\u003e United States\u003cbr\u003e \u003cstrong\u003eEnvironmental Certification\u003c\/strong\u003e\u003cbr\u003e WEEE\u003cbr\u003e \u003cstrong\u003eEnvironmentally Friendly\u003c\/strong\u003e\u003cbr\u003e Yes\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42532713889989,"sku":"RDL-TXTPR1A","price":185.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/616234f5-f7f5-4915-b6a7-fe58a72297e5.jpg?v=1737420127"},{"product_id":"rdl-dd-bn22-wall-mounted-bi-directional-mic-line-dante-interface-2-x-2-white","title":"RDL DD-BN22 Wall-Mounted Bi-Directional Mic\/Line Dante Interface 2 x 2, White","description":"\u003cp\u003e\u003cstrong\u003eRDL DD-BN22 Wall-Mounted Bi-Directional Mic\/Line Dante Interface 2 x 2, White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e\n\u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e\n\u003cp\u003eTwo Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e\n\u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless-steel chassis with dual powder-coated or stainless-steel Decora front plates.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN22's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante Network Interface for Two Audio Inputs and Two Audio Outputs \u003c\/li\u003e\n\u003cli\u003eInputs and Outputs on XLR Jacks on front panels \u003c\/li\u003e\n\u003cli\u003eConverts Two Standard Mic or Line Audio Sources to Dante Network Channels \u003c\/li\u003e\n\u003cli\u003eConverts Two Dante Network Audio Signals to Mic or Line Level \u003c\/li\u003e\n\u003cli\u003eSpecial Software Not Required for Module Setup \u003c\/li\u003e\n\u003cli\u003eEach Input is Switch Selectable for Mic or Line \u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB \u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable 48 V Mic Phantom (P48) \u003c\/li\u003e\n\u003cli\u003eSwitch-Selectable Line Gain: Unity, 12 dB or 19 dB \u003c\/li\u003e\n\u003cli\u003eEach Output is Switch Selectable for Mic or Line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Characteristics\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication\/Usage\u003c\/strong\u003e\u003cbr\u003e Audio, Microphone, Switch\u003cbr\u003e \u003cstrong\u003eColor\u003c\/strong\u003e\u003cbr\u003e White\u003cbr\u003e \u003cstrong\u003eDepth\u003c\/strong\u003e\u003cbr\u003e 2.1”\u003cbr\u003e \u003cstrong\u003eDepth (mm)\u003c\/strong\u003e\u003cbr\u003e 53.086\u003cbr\u003e \u003cstrong\u003eHeight\u003c\/strong\u003e\u003cbr\u003e 4.1”\u003cbr\u003e \u003cstrong\u003eHeight (mm)\u003c\/strong\u003e\u003cbr\u003e 104.394\u003cbr\u003e \u003cstrong\u003eWeight (Approximate)\u003c\/strong\u003e\u003cbr\u003e 14.96 oz\u003cbr\u003e \u003cstrong\u003eWidth\u003c\/strong\u003e\u003cbr\u003e 3.5”\u003cbr\u003e \u003cstrong\u003eWidth (mm)\u003c\/strong\u003e\u003cbr\u003e 89.408\u003cbr\u003e \u003cstrong\u003eMiscellaneous\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003cbr\u003e United States\u003cbr\u003e \u003cstrong\u003eEnvironmental Certification\u003c\/strong\u003e\u003cbr\u003e WEEE\u003cbr\u003e \u003cstrong\u003eEnvironmentally Friendly\u003c\/strong\u003e\u003cbr\u003e Yes\u003cbr\u003e \u003cstrong\u003eTAA Compliant\u003c\/strong\u003e\u003cbr\u003e No\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42532714414277,"sku":"RDL-DDBN22","price":862.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/99dd9827-9d5f-4af3-a239-38493eae8093.jpg?v=1737419915"},{"product_id":"rdl-ru-mlb2p-mic-line-bi-directional-network-interface","title":"RDL RU-MLB2P Mic\/Line Bi-Directional Network Interface","description":"\u003cp\u003e\u003cstrong\u003eRDL RU-MLB2P Mic\/Line Bi-Directional Network Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION: The RU-MLB2 is a high-quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels.\u003c\/p\u003e\n\u003cp\u003eNetwork to Line Level Interface Section\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2 converts two Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level.\u003c\/p\u003e\n\u003cp\u003eOne front-panel green signal LED corresponds to each of the two Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location.\u003c\/p\u003e\n\u003cp\u003eMic or Line Level to Network Interface Section\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2 converts two audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone sets the preamplifier gain to 60 dB. Connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for normal operating level. Separate wiring terminals are provided for balanced and unbalances sources. A front-panel variable-intensity LED indicator is provided for each of the two inputs to facilitate setup.\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2 is powered from an external 24 Vdc power supply, available separately. The RU-MLB2P is equipped to operate from a PoE enabled network switch. The RU-MLB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.\u003c\/p\u003e\n\u003cp\u003eThe RU-MLB2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterfaces Two Dante Inputs and Two Dante Outputs \u003c\/li\u003e\n\u003cli\u003eConverts Two Standard Mic or Line Audio Sources to Dante Network Channels \u003c\/li\u003e\n\u003cli\u003eEach Input is Switch-Selectable for Mic or Line \u003c\/li\u003e\n\u003cli\u003eNo User or Installer Gain Adjustments are Required \u003c\/li\u003e\n\u003cli\u003eAutomatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics \u003c\/li\u003e\n\u003cli\u003eP48 Phantom is Provided on Each Microphone Input \u003c\/li\u003e\n\u003cli\u003eLine-Level Inputs Accept Unbalanced -10 dBV or balanced +4 dBu Signals with \u0026gt; 18 dB Headroom \u003c\/li\u003e\n\u003cli\u003eFront-Panel Signal LED for Each Audio Input \u003c\/li\u003e\n\u003cli\u003eConverts Two Dante Network Audio Signals to Balanced Line Level \u003c\/li\u003e\n\u003cli\u003eLine-Level Outputs Provide +4 dBu with \u0026gt; 18 dB Headroom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Characteristics\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eApplication\/Usage\u003c\/strong\u003e\u003cbr\u003e Commercial, Industrial, Microphone, Network\u003cbr\u003e \u003cstrong\u003eDepth\u003c\/strong\u003e\u003cbr\u003e 5.2”\u003cbr\u003e \u003cstrong\u003eDepth (mm)\u003c\/strong\u003e\u003cbr\u003e 132.08\u003cbr\u003e \u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003cbr\u003e Freestanding, Rack Mount, Surface Mount\u003cbr\u003e \u003cstrong\u003eHeight\u003c\/strong\u003e\u003cbr\u003e 1.7”\u003cbr\u003e \u003cstrong\u003eHeight (mm)\u003c\/strong\u003e\u003cbr\u003e 43.18\u003cbr\u003e \u003cstrong\u003eWidth\u003c\/strong\u003e\u003cbr\u003e 5.8”\u003cbr\u003e \u003cstrong\u003eWidth (mm)\u003c\/strong\u003e\u003cbr\u003e 147.32\u003cbr\u003e \u003cstrong\u003ePower Description\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003cbr\u003e 24V DC\u003cbr\u003e \u003cstrong\u003ePower Source\u003c\/strong\u003e\u003cbr\u003e DC\u003cbr\u003e \u003cstrong\u003eWarranty\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eLimited Warranty\u003c\/strong\u003e\u003cbr\u003e 3 Year\u003cbr\u003e \u003cstrong\u003eMiscellaneous\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003cbr\u003e United States\u003cbr\u003e \u003cstrong\u003eEnvironmentally Friendly\u003c\/strong\u003e\u003cbr\u003e Yes\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42532714840261,"sku":"RDL-RUMLB2P","price":810.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/34e0c8cb-8d6a-4e20-8647-b31ebdd119c8.jpg?v=1737420039"},{"product_id":"rdl-ru-nfdp-rack-up-series-network-audio-signals-to-format-a-interface-distributor-converter","title":"RDL RU-NFDP RACK-UP Series Network Audio Signals to Format-A Interface\/Distributor Converter","description":"\u003cp\u003e\u003cstrong\u003eRU-NFD Modules: A Comprehensive Overview\u003c\/strong\u003e\u003cbr\u003e\n Are you in search of Dante audio network interface products that are compatible with RDL Format-A twisted pair products? Look no further than the RU-NFD modules! These modules are perfect for commercial and industrial installations and can be mounted in equipment racks, closets, conference tables, and on shelves or backboards.\u003c\/p\u003e\n\u003cp\u003eThe RU-NFD is designed for use as an RDL Format-A sender\/distributor and is compatible with a Dante-enabled network. It easily converts three Dante audio channels to RDL Format-A, with each network channel corresponding to Pair A, B, or C of the Format-A outputs. Additionally, the unit converts a fourth Dante audio channel to a balanced line-level AUX output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n The RU-NFD has a front-panel green signal LED that corresponds to each of the four Dante input channels, with received audio level indicated on the variable-intensity LED indicator. The Format-A output is distributed to three separate rear-panel RJ45 jacks, with each Format-A output jack providing up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy-chained from one output jack, or may be connected by home run to each of the three outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\n The RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates or feeding other equipment using rack-mounted, shelf-mounted, or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\n The RU-NFD is powered from an external 24 Vdc power supply, which is available separately and powers the RU-NFD and Format-A receivers connected to all three Format-A outputs. The unit is also equipped for PoE, which powers it and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003e\n The RU-NFD is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted, or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RU-NFD modules are audio network interface products that work with RDL Format-A twisted pair products.\n \u003c\/li\u003e\n\u003cli\u003eThese modules can be installed in equipment racks, closets, conference tables, and shelves or backboards in commercial\/industrial installations.\n \u003c\/li\u003e\n\u003cli\u003eThey convert four Dante network audio signals to RDL Format-A and Aux.\n \u003c\/li\u003e\n\u003cli\u003eInstallation is made easy with Format-A connections on RJ45 through CATx cable.\n \u003c\/li\u003e\n\u003cli\u003eThree Dante audio signals feed Format-A output pairs A, B, and C.\n \u003c\/li\u003e\n\u003cli\u003eThe fourth Dante audio signal feeds an auxiliary balanced +4 dBu line output.\n \u003c\/li\u003e\n\u003cli\u003eFormat-A pairs are distributed to three separate Format-A output jacks.\n \u003c\/li\u003e\n\u003cli\u003eSignal LEDs indicate audio for each of the four received network signal channels.\n \u003c\/li\u003e\n\u003cli\u003eThe modules feature high-resolution 24-bit digital to analog conversion.\n \u003c\/li\u003e\n\u003cli\u003eRDL's legendary analog filtering enhances superb audio performance.\n \u003c\/li\u003e\n\u003cli\u003eThe primary output jack powers remote Format-A receivers.\n \u003c\/li\u003e\n\u003cli\u003eAn external 24 Vdc supply can power Format-A receivers through all output jacks.\n \u003c\/li\u003e\n\u003cli\u003eLED indicators show network sync status.\n \u003c\/li\u003e\n\u003cli\u003eOutputs mute when digital audio inputs are inactive.\n \u003c\/li\u003e\n\u003cli\u003eThe modules can operate normally or in hot-standby mode from PoE (Model RU-NFDP).\n \u003c\/li\u003e\n\u003cli\u003eThey are compatible with a wide array of RDL Format-A active and passive receivers.\n \u003c\/li\u003e\n\u003cli\u003eThe modules are equipped for rack mounting or surface mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connector\u003c\/strong\u003e\u003cbr\u003e\n RJ45 with Link and Speed indicators\u003cbr\u003e\n \u003cstrong\u003eDigital Audio Ethernet Protocol\u003c\/strong\u003e\u003cbr\u003e\n Dante\u003cbr\u003e\n \u003cstrong\u003eTransmission Rate\u003c\/strong\u003e\u003cbr\u003e\n 100 Mbps\u003cbr\u003e\n \u003cstrong\u003eSample Rates Supported\u003c\/strong\u003e\u003cbr\u003e\n 44.1 kHz, 48 kHz (default)\u003cbr\u003e\n \u003cstrong\u003eBit Depth Supported\u003c\/strong\u003e\u003cbr\u003e\n 24 bits\u003cbr\u003e\n \u003cstrong\u003eAudio Operating Levels\u003c\/strong\u003e\u003cbr\u003e\n -18 dBFS = +4 dBu\u003cbr\u003e\n \u003cstrong\u003eFormat-A Outputs\u003c\/strong\u003e\u003cbr\u003e\n RDL Format-A RJ45 (3)\u003cbr\u003e\n \u003cstrong\u003eFormat-A Signal Pairs Used (3)\u003c\/strong\u003e\u003cbr\u003e\n A, B, C (each Format-A output)\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.75 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -85 dB (pair active); \u0026lt; -100 dB (pair muted)\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 80 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eAUX Output\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003e\n Balanced, detachable terminal block\u003cbr\u003e\n \u003cstrong\u003eOutput Level\u003c\/strong\u003e\u003cbr\u003e\n +4 dBu (nominal)\u003cbr\u003e\n \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e\n 150 Ω balanced; 75 Ω unbalanced\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.5 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -75 dB\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 80 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eIndicators (12)\u003c\/strong\u003e\u003cbr\u003e\n Power In (1); Power Out (3); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)\u003cbr\u003e\n \u003cstrong\u003ePower Connections (2)\u003c\/strong\u003e\u003cbr\u003e\n Power Jack; Detachable Terminal Block\u003cbr\u003e\n \u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003cbr\u003e\n 0 Degrees C to 40 Degrees C\u003cbr\u003e\n \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e\n 24 Vdc @ 120 mA plus connected loads, or PoE (RU-FNP)\u003cbr\u003e\n PoE (RU-NFDP)\u003cbr\u003e\n Class 0, IEEE 802.3af\u003cbr\u003e\n \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n 5.8” (15 cm) W; 1.7” (4.3 cm) H; 5.2” (13.2 cm) D\u003cbr\u003e\n \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e\n Cardboard Box\u003cbr\u003e\n \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e\n 6 x 6 x 2.625 in.\u003cbr\u003e\n \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e\n 1.605 lbs. (RU-NFD); 1.63 (RU-NFDP)\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42792647655621,"sku":"RDL-RUNFD","price":761.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/a4e66918-15b3-4153-9fd5-4d16df044536.jpg?v=1737420046"},{"product_id":"rdl-ru-fnp-rack-up-series-format-a-and-aux-source-to-network-interface-converter","title":"RDL RU-FNP RACK-UP Series Format-A and Aux Source to Network Interface Converter","description":"\u003cp\u003e\u003cstrong\u003eRU-FN Modules: The Ideal Solution for Dante Audio Network Interfaces\u003c\/strong\u003e\u003cbr\u003e\n RU-FN modules are Dante audio network interface devices that are compatible with RDL Format-A twisted pair products. They are designed to be mounted in various locations, such as equipment racks, closets, conference tables, and shelves or backboards in commercial and industrial installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e\n As an RDL Format-A receiver, the RU-FN connects to a Dante-enabled network and converts the three Format-A audio pairs to Dante networked digital audio channels. Each network channel corresponds to Pair A, B, or C of the Format-A input. Additionally, the unit converts a fourth input, balanced or unbalanced line-level AUX, to Dante.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n The front-panel green signal LED corresponds to each of the three Format-A input channels, while the received audio level is indicated on the variable-intensity LED indicator. The dual-LED VU meter facilitates adjustment of the front-panel AUX input gain control. The AUX input supports the complete range of normal unbalanced and balanced line-level sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003e\n The Format-A input jack provides up to 200 mA of power to connected Format-A senders. Multiple senders may be daisy-chained from the Format-A input jack. The RU-FN Format-A input supports the entire range of Format-A senders, making each input pair available for end-user connection on various wall plates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\n The RU-FN is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-FN and Format-A senders connected to the Format-A input. The RU-FNP is equipped with PoE, which powers the RU-FN and the connected Format-A senders. If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e\u003cbr\u003e\n The RU-FN is constructed with a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RU-FN modules are audio network interface products that support Dante and are compatible with RDL Format-A twisted pair products.\n \u003c\/li\u003e\n\u003cli\u003eThese modules are designed to be installed in various locations such as equipment racks, closets, conference tables, and shelves or backboards in commercial\/industrial installations.\n \u003c\/li\u003e\n\u003cli\u003eThey convert RDL Format-A and Aux Source to four Dante network channels.\n \u003c\/li\u003e\n\u003cli\u003eInstallation is made easy with Format-A connections on RJ45 through CATx cable.\n \u003c\/li\u003e\n\u003cli\u003eFormat-A audio sources from Pairs A, B, and C are converted to Dante.\n \u003c\/li\u003e\n\u003cli\u003eThe fourth Dante audio channel is fed from an unbalanced or balanced Aux line input.\n \u003c\/li\u003e\n\u003cli\u003eThere is a front-panel gain adjustment with a dual-LED VU meter for the Aux input.\n \u003c\/li\u003e\n\u003cli\u003eSignal LEDs indicate audio for each of the three Format-A pairs.\n \u003c\/li\u003e\n\u003cli\u003eThe modules feature high-resolution 24-bit analog to digital conversion.\n \u003c\/li\u003e\n\u003cli\u003eLegendary RDL analog filtering enhances superb audio performance.\n \u003c\/li\u003e\n\u003cli\u003eThey can power remote Format-A senders through the Format-A input jack.\n \u003c\/li\u003e\n\u003cli\u003eLED indicators show network sync status.\n \u003c\/li\u003e\n\u003cli\u003eThe modules can operate normally or in hot-standby mode using PoE (Model RU-FNP).\n \u003c\/li\u003e\n\u003cli\u003eThey are compatible with a wide array of RDL Format-A active and passive senders.\n \u003c\/li\u003e\n\u003cli\u003eThe modules are equipped for both rack mounting and surface mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connector\u003c\/strong\u003e\u003cbr\u003e\n RJ45 with Link and Speed indicators\u003cbr\u003e\n \u003cstrong\u003eDigital Audio Ethernet Protocol\u003c\/strong\u003e\u003cbr\u003e\n Dante\u003cbr\u003e\n \u003cstrong\u003eTransmission Rate\u003c\/strong\u003e\u003cbr\u003e\n 100 Mbps\u003cbr\u003e\n \u003cstrong\u003eSample Rates Supported\u003c\/strong\u003e\u003cbr\u003e\n 44.1 kHz, 48 kHz (default)\u003cbr\u003e\n \u003cstrong\u003eBit Depth Supported\u003c\/strong\u003e\u003cbr\u003e\n 24 bits\u003cbr\u003e\n \u003cstrong\u003eAudio Operating Levels\u003c\/strong\u003e\u003cbr\u003e\n -18 dBFS = +4 dBu\u003cbr\u003e\n \u003cstrong\u003eFormat-A Input\u003c\/strong\u003e\u003cbr\u003e\n RDL Format-A RJ45\u003cbr\u003e\n \u003cstrong\u003eFormat-A Signal Pairs Used (3)\u003c\/strong\u003e\u003cbr\u003e\n A, B, C\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.5 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -75 dB\u003cbr\u003e\n \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 90 dB (50 Hz to 120 Hz, any input pair)\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 80 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eAUX Input\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003e\n Balanced, detachable terminal block\u003cbr\u003e\n \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 20 kΩ\u003cbr\u003e\n \u003cstrong\u003eInput Level for +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n -16 dBu to +12 dBu, +22 dBu maximum\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.75 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -75 dB\u003cbr\u003e\n \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 60 dB (50 Hz to 120 Hz)\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 80 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eIndicators (11)\u003c\/strong\u003e\u003cbr\u003e\n Power In (1); Power Out (1); Audio Signal LEDs (3), AUX Dual-LED VU Meter (2), Network Sys and Sync (2), Ethernet Link and Speed (2)\u003cbr\u003e\n \u003cstrong\u003ePower Connections (2)\u003c\/strong\u003e\u003cbr\u003e\n Power Jack; Detachable Terminal Block\u003cbr\u003e\n \u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003cbr\u003e\n 0 Degrees C to 40 Degrees C\u003cbr\u003e\n \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e\n 24 Vdc @ 100 mA plus connected loads, or PoE (RU-FNP)\u003cbr\u003e\n \u003cstrong\u003ePoE (RU-FNP)\u003c\/strong\u003e\u003cbr\u003e\n Class 0, IEEE 802.3af\u003cbr\u003e\n \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n 5.8” (15 cm) W; 1.7” (4.3 cm) H; 5.2” (13.2 cm) D\u003cbr\u003e\n \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e\n Cardboard Box\u003cbr\u003e\n \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e\n 6 x 6 x 2.625 in.\u003cbr\u003e\n \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e\n 1.585 lbs. (RU-FN); 1.61 lbs. (RU-FNP)\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42792648016069,"sku":"RDL-RUFNP","price":796.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/5e544c7e-e6ca-43c8-be01-de07b714c7fd.jpg?v=1737420027"},{"product_id":"rdl-d-tpr3a-twisted-pair-format-a-active-three-pair-receiver-module","title":"RDL D-TPR3A Twisted Pair Format-A Active Three-Pair Receiver Module","description":"\u003cp\u003e\u003cstrong\u003eD SERIES-TPR3A Modules: Ideal for High-Quality Audio Reception\u003c\/strong\u003e\u003cbr\u003e\n The D SERIES-TPR3A modules are three-pair audio receiving modules that are fully compatible with RDL Format-A twisted pair products. Designed for wall boxes, cabinets, or other types of enclosures, these modules allow users to connect external equipment with ease. The -TPR3A models can be mounted in RDL WB-1U and WB-2U wall boxes or standard US electrical boxes.\u003c\/p\u003e\n\u003cp\u003eThese modules are available in different colors, depending on the user's preference. The D-TPR3A features a white front-panel laminate with gray lettering to match RDL Decora-style remote controls. The DB-TPR3A has a black front-panel laminate, while the DS-TPR3A is constructed of stainless steel, making it perfect for commercial\/industrial installations that use RDL Decora-style stainless steel remote controls.\u003c\/p\u003e\n\u003cp\u003eThe D SERIES-TPR3A modules feature an XLR audio output and two RCA phono jack outputs (one for the left channel and one for the right channel). The audio signal received from pair A of the RJ45 INPUT jack feeds the XLR audio output jack. During installation, the output level from the XLR jack can be set to either MIC or LINE level using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level.\u003c\/p\u003e\n\u003cp\u003eThanks to the bridging input circuits used in all FORMAT-A twisted pair receivers, additional receivers can be connected to the same twisted pair feed. This feature allows for enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.\u003c\/p\u003e\n\u003cp\u003eThe D SERIES-TPR3A can be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Alternatively, the -TPR3A can be remotely powered through the twisted pair cable from any other module, signal distributor, or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.\u003c\/p\u003e\n\u003cp\u003eIn conclusion, the D SERIES-TPR3A modules provide designers and installers with an excellent choice in economical twisted pair products. With superior audio performance, design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion, these modules are the ideal solution for high-quality audio reception.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe D SERIES-TPR3A modules are audio receiving modules that come in three pairs and are compatible with RDL Format-A twisted pair products.\n \u003c\/li\u003e\n\u003cli\u003eThese modules are designed to be mounted in wall boxes, cabinets, or other enclosures that allow users to connect external equipment.\n \u003c\/li\u003e\n\u003cli\u003eThe -TPR3A models can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.\n \u003c\/li\u003e\n\u003cli\u003eThe D-TPR3A module has a white front-panel laminate with gray lettering, which matches RDL Decora-style remote controls.\n \u003c\/li\u003e\n\u003cli\u003eThe DB-TPR3A module has a black front-panel laminate.\n \u003c\/li\u003e\n\u003cli\u003eThe DS-TPR3A module is made of stainless steel and is designed to coordinate with RDL Decora-style stainless steel remote controls in commercial\/industrial installations.\n \u003c\/li\u003e\n\u003cli\u003eIt has a balanced Mic or Line Level XLR output.\n \u003c\/li\u003e\n\u003cli\u003eThe output level can be switch-selected on the rear panel.\n \u003c\/li\u003e\n\u003cli\u003eIt has two unbalanced -10 dBV Phono Jack audio outputs.\n \u003c\/li\u003e\n\u003cli\u003eThe module utilizes all three Format-A pairs and features studio-quality precision active balanced circuitry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003e\n RDL FORMAT-AInput Connection: RJ45 (Models D-, DS-); Detachable Terminal Block (Model EM-)\u003cbr\u003e\n \u003cstrong\u003eFormat-A Signal Pairs Used (3)\u003c\/strong\u003e\u003cbr\u003e\n A, B, COutputs (3): 150 Ω balanced; 100 Ω unbalanced\u003cbr\u003e\n \u003cstrong\u003eOutput Connection\u003c\/strong\u003e\u003cbr\u003e\n XLR (balanced Mic or Line); RCA Phono Jack (2)\u003cbr\u003e\n \u003cstrong\u003eOutput Level\u003c\/strong\u003e\u003cbr\u003e\n XLR: -45 dBu Mic or +4 dBu Line Level, Switch-selectable on rear panel;\u003cbr\u003e\n \u003cstrong\u003eRCA phono\u003c\/strong\u003e\u003cbr\u003e\n -10 dBV\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 10 Hz to 50 kHz (± 0.1 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.005%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -90 dB\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 90 dB (1 kHz); \u0026lt; 75 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 80 dB (50 Hz to 150 Hz)\u003cbr\u003e\n \u003cstrong\u003eIndicator\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003ePower In Power Connections (2)\u003c\/strong\u003e\u003cbr\u003e\n Detachable terminal block; RJ45Ambient\u003cbr\u003e\n \u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003cbr\u003e\n 0 Degrees C to 55 Degrees C\u003cbr\u003e\n \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e\n 24 Vdc @ 45 mA plus connected loads\u003cbr\u003e\n \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n 1.6” (4.06 cm) W; 4.11” (10.45 cm) H; 1.89” (4.8 cm) D\u003cbr\u003e\n \u003cstrong\u003eMounting Box Minimum Depth\u003c\/strong\u003e\u003cbr\u003e\n 2.4” (Models D-, DS-); 39 mm (Model EM-)\u003cbr\u003e\n \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e\n Cardboard Box\u003cbr\u003e\n \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e\n 3.625 x 4.625 x 2.125 in.\u003cbr\u003e\n \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e\n 0.39 lbs.\u003cbr\u003e\n \u003cstrong\u003eWEEE weight\u003c\/strong\u003e\u003cbr\u003e\n 0.245 lbs.\u003cbr\u003e\n \u003cstrong\u003eTariff code\u003c\/strong\u003e\u003cbr\u003e\n 8517.18.0000\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42792649064645,"sku":"RDL-DTPR3A","price":259.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/4378f86c-284c-4b9b-aa75-049cbdf14d57.jpg?v=1737419962"},{"product_id":"rdl-dd-bn40-4-x-2-wall-mounted-bi-directional-mic-line-dante-interface","title":"RDL DD-BN40 4 x 2 Wall-Mounted Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003e\u003cstrong\u003eIntroducing the DD-BN40: A Comprehensive Dante Audio Network Interface\u003c\/strong\u003e\u003cbr\u003e\n The DD-BN40 is a wall-mounted audio network interface that is equipped with four XLR mic or line inputs on the front panel and two-line outputs on a detachable terminal block at the back. There is no need for any special software to configure the DD-BN40. Each input has three switches that are accessible from the front of the unit when the cover plate is removed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range, and the third switch sets the gain. Each output has a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 is compatible with a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. It is PoE powered and available in multiple finishes with optional customized graphics.\u003c\/p\u003e\n\u003cp\u003eThe four XLR inputs are converted into four separate Dante network transmit channels. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e\n\u003cp\u003eTwo Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer before mounting the unit. The outputs are connected through a detachable terminal block.\u003c\/p\u003e\n\u003cp\u003eThe outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. The AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e\n\u003cp\u003eGreen LEDs visible from the front of the unit indicate valid PoE power and synchronization to the Dante network.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN40 is a professional-grade product with discrete mic preamplifiers for studio-quality fidelity and low noise performance. It also boasts a stainless-steel chassis with dual powder-coated or stainless-steel Decora front plates, and metal XLR jacks.\u003c\/p\u003e\n\u003cp\u003eThe DD-BN40's superior performance specifications make it ideal for the most demanding installations, and it is an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DD-BN40 is a comprehensive Dante audio network interface designed for wall-mounting.\n \u003c\/li\u003e\n\u003cli\u003eIt offers four XLR mic or line inputs on the front panels.\n \u003c\/li\u003e\n\u003cli\u003eThe rear panel features two-line outputs on a detachable terminal block.\n \u003c\/li\u003e\n\u003cli\u003eConfiguration of the DD-BN40 does not require any special software.\n \u003c\/li\u003e\n\u003cli\u003eEach input has three switches that can be adjusted from the front of the unit.\n \u003c\/li\u003e\n\u003cli\u003eThe switches control P48 phantom power, mic or line gain range, and gain level.\n \u003c\/li\u003e\n\u003cli\u003eThe outputs have a switch to set them to either balanced professional or unbalanced consumer level.\n \u003c\/li\u003e\n\u003cli\u003eThe DD-BN40 can fit into a standard US dual-gang electrical box or an RDL WB-2 back box for thinner European walls.\n \u003c\/li\u003e\n\u003cli\u003eIt is powered by PoE (Power over Ethernet).\n \u003c\/li\u003e\n\u003cli\u003eThe DD-BN40 is available in multiple finishes and can be customized with optional graphics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connector\u003c\/strong\u003e\u003cbr\u003e\n RJ45 with Link and Speed indicators\u003cbr\u003e\n \u003cstrong\u003eDigital Audio Ethernet Protocol\u003c\/strong\u003e\u003cbr\u003e\n Dante\u003cbr\u003e\n \u003cstrong\u003eTransmission Rate\u003c\/strong\u003e\u003cbr\u003e\n 100 Mbps\u003cbr\u003e\n \u003cstrong\u003eSample Rates Supported\u003c\/strong\u003e\u003cbr\u003e\n 44.1 kHz, 48 kHz (default)\u003cbr\u003e\n \u003cstrong\u003eBit Depth Supported\u003c\/strong\u003e\u003cbr\u003e\n 24 bits\u003cbr\u003e\n \u003cstrong\u003eAudio Operating Level\u003c\/strong\u003e\u003cbr\u003e\n -20dBFS = +4dBu\u003cbr\u003e\n \u003cstrong\u003eReference Level\u003c\/strong\u003e\u003cbr\u003e\n 0dBFS = +24dBu\u003cbr\u003e\n \u003cstrong\u003eMic\/Line Input to Network Interface\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eInput (4)\u003c\/strong\u003e\u003cbr\u003e\n XLR (female)\u003cbr\u003e\n \u003cstrong\u003eGain\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e\n 40dB (LO), 48dB (MED), 62dB (HI); Line\u003cbr\u003e\n Unity (LO), 8dB (MED), 19dB (HI)\u003cbr\u003e\n \u003cstrong\u003eInput Level (for +4dBu\/-20dBFS)\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e\n -36dBu (LO), -44dBu (MED), -58dBu (HI); Line\u003cbr\u003e\n +4dBu (LO), -8dBu (MED), -15dBu (HI)\u003cbr\u003e\n \u003cstrong\u003eInput Level (maximum)\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e\n -16dBu (LO), -24dBu (MED), -38dBu (HI); Line\u003cbr\u003e\n +24dBu (LO), +12dBu (MED), +5dBu (HI)\u003cbr\u003e\n \u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 2.5 kΩ (MIC); \u0026gt; 5 kΩ (LINE)\u003cbr\u003e\n \u003cstrong\u003ePhantom Power\u003c\/strong\u003e\u003cbr\u003e\n P48, 48 Vdc, switch-selectable\u003cbr\u003e\n \u003cstrong\u003eStandard for Phantom\u003c\/strong\u003e\u003cbr\u003e\n IEC 61938\u003cbr\u003e\n 2013\u003cbr\u003e\n \u003cstrong\u003eSelectors for input (3)\u003c\/strong\u003e\u003cbr\u003e\n Phantom, Mic\/Line, Gain\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.5dB)\u003cbr\u003e\n \u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e\n -130dBu (62dB gain); -132dBu A-Weighted\u003cbr\u003e\n \u003cstrong\u003eNoise below -20dBFS (20 to 20 kHz)\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eMic\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -72dB (LO), \u0026lt; -72dB (MED), \u0026lt; -68dB (HI); Line\u003cbr\u003e\n \u0026lt; -72dB (LO), \u0026lt; -72dB (MED), \u0026lt; -70dB (HI)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1% (20 Hz to 20 kHz, +4dBu\/-20dBFS); 0.015% at 1 kHz (typ)\u003cbr\u003e\n \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 65dB (50 Hz to 120 Hz)\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)\u003cbr\u003e\n \u003cstrong\u003eHeadroom\u003c\/strong\u003e\u003cbr\u003e\n 20dB\u003cbr\u003e\n \u003cstrong\u003eNetwork to Line Outputs\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eOutputs (2)\u003c\/strong\u003e\u003cbr\u003e\n Balanced, detachable terminal block\u003cbr\u003e\n \u003cstrong\u003eOutput Level (operating)\u003c\/strong\u003e\u003cbr\u003e\n +4dBu (nominal) balanced; -10dBV (nominal) unbalanced, switch-selectable\u003cbr\u003e\n \u003cstrong\u003eOutput Level (maximum)\u003c\/strong\u003e\u003cbr\u003e\n +24dBu balanced; +10dBV unbalanced\u003cbr\u003e\n \u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e\n 150 Ω balanced; 2.5 kΩ unbalanced\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 20 Hz to 20 kHz (± 0.5dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.1%\u003cbr\u003e\n \u003cstrong\u003eTHD\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.01% (1 kHz)\u003cbr\u003e\n \u003cstrong\u003eNoise\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; -80dB (below +4dBu or -10dBV); \u0026lt; -100 (below +24dBu)\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4dBu or -10dBV\u003c\/strong\u003e\u003cbr\u003e\n 20dB\u003cbr\u003e\n \u003cstrong\u003eIndicators (4)\u003c\/strong\u003e\u003cbr\u003e\n Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)\u003cbr\u003e\n \u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003cbr\u003e\n 0 Degrees C to 40 Degrees C; 30 Degrees C maximum recommended\u003cbr\u003e\n \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e\n PoE Class 0, IEEE 802.3af\u003cbr\u003e\n \u003cstrong\u003eSpecification Conditions\u003c\/strong\u003e\u003cbr\u003e\n \u003cstrong\u003eGain\/Level\u003c\/strong\u003e\u003cbr\u003e\n ± 1dB; Source termination\u003cbr\u003e\n 150 Ω; A to D values measured in digital domain\u003cbr\u003e\n \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n 3.52” (W) x 4.11” (H) x 2.09” (D)\u003cbr\u003e\n \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e\n Cardboard Box\u003cbr\u003e\n \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e\n 3.625 x 4.625 x 2.125 in.\u003cbr\u003e\n \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e\n 1.0 lbs.\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42792651882693,"sku":"RDL-DDBN40","price":923.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/a36a0ef0-f26e-460c-8f5b-06d2fa9128b0.jpg?v=1737419923"},{"product_id":"rdl-sf-tps24a-8-twisted-pair-format-a-output-line-level-sender","title":"RDL SF-TPS24A 8 Twisted Pair Format-A Output Line-Level Sender","description":"\u003cp\u003e\u003cstrong\u003eOverview of the RDL SF-TPS24A Eight-Section Audio Sending\/Transmitter Chassis\u003c\/strong\u003e\u003cbr\u003e\n The RDL SF-TPS24A is an audio sending\/transmitter chassis that consists of eight sections. This product is designed to be compatible with RDL Format-A twisted pair products. Each section can connect up to three +4 dBu balanced line-level sources through a detachable terminal block. These signals are then transmitted via pairs A, B, and C of the associated RJ45 connector.\u003c\/p\u003e\n\u003cp\u003eIt's important to note that the SF-TPS24A feeds all three signal pairs in the twisted pair cable, and no other sending modules may be connected on the same cable with each RJ45 output.\u003c\/p\u003e\n\u003cp\u003eThis product can be powered directly through a 24 Vdc power supply using either the power jack or the detachable terminal block. Additionally, local power connected to the module is also fed to all modules that are connected to the eight OUTPUT RJ45 jacks. Each RJ45 connector power is protected against wiring faults by an automatically resetting fuse. The front-panel green LEDs indicate valid module power on each RJ45.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe RDL SF-TPS24A is a transmitter chassis designed for audio sending.\n \u003c\/li\u003e\n\u003cli\u003eIt is compatible with RDL Format-A twisted pair products.\n \u003c\/li\u003e\n\u003cli\u003eEach section of the chassis can accommodate three +4 dBu balanced line-level sources.\n \u003c\/li\u003e\n\u003cli\u003eThe sources can be connected using a detachable terminal block.\n \u003c\/li\u003e\n\u003cli\u003eThe signals are converted and transmitted on pairs A, B, and C of the RJ45 connector.\n \u003c\/li\u003e\n\u003cli\u003eThe chassis has eight separate three-pair Format-A sender sections.\n \u003c\/li\u003e\n\u003cli\u003eIt can send up to 24 audio channels.\n \u003c\/li\u003e\n\u003cli\u003eThe inputs for each section are wired to feed pairs A, B, and C.\n \u003c\/li\u003e\n\u003cli\u003eThe chassis utilizes all three Format-A pairs.\n \u003c\/li\u003e\n\u003cli\u003eIt features studio-quality precision active balanced circuitry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs (24)\u003c\/strong\u003e\u003cbr\u003e\n 20 kΩ balanced\u003cbr\u003e\n \u003cstrong\u003eInput Connection\u003c\/strong\u003e\u003cbr\u003e\n Detachable Terminal Block (Balanced)\u003cbr\u003e\n \u003cstrong\u003eInput Level\u003c\/strong\u003e\u003cbr\u003e\n +4 dBu Bal.; +22 dBu Max\u003cbr\u003e\n \u003cstrong\u003eFormat-A Signal Pairs Used (3)\u003c\/strong\u003e\u003cbr\u003e\n A, B, C (per section)\u003cbr\u003e\n \u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003e\n RDL TP Format-A\u003cbr\u003e\n \u003cstrong\u003eOutput Connection\u003c\/strong\u003e\u003cbr\u003e\n RJ45\u003cbr\u003e\n \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e\n 10 Hz to 50 kHz (± 0.1 dB)\u003cbr\u003e\n \u003cstrong\u003eTHD+N\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 0.005%\u003cbr\u003e\n \u003cstrong\u003eNoise below +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 90 dB\u003cbr\u003e\n \u003cstrong\u003eCrosstalk\u003c\/strong\u003e\u003cbr\u003e\n \u0026lt; 85 dB (20 Hz to 20 kHz)\u003cbr\u003e\n \u003cstrong\u003eHeadroom above +4 dBu\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 18 dB\u003cbr\u003e\n \u003cstrong\u003eCMRR\u003c\/strong\u003e\u003cbr\u003e\n \u0026gt; 60 dB (50 Hz to 150 Hz)\u003cbr\u003e\n \u003cstrong\u003eIndicators (8)\u003c\/strong\u003e\u003cbr\u003e\n Power (1 per RJ45)\u003cbr\u003e\n \u003cstrong\u003ePower Connections (2)\u003c\/strong\u003e\u003cbr\u003e\n Power Jack; Detachable Terminal Block\u003cbr\u003e\n \u003cstrong\u003eAmbient Operating Environment\u003c\/strong\u003e\u003cbr\u003e\n 32 Degrees to 122 Degrees F (0 Degrees to 50 Degrees C)\u003cbr\u003e\n \u003cstrong\u003ePower Requirement\u003c\/strong\u003e\u003cbr\u003e\n 24 Vdc @ 440 mA (per board) plus connected loads (1.6 A max)\u003cbr\u003e\n \u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\n 8.74 x 1.68 x 5.78” (22.2 x 4.27 x 14.68 cm)\u003cbr\u003e\n \u003cstrong\u003ePackage Type\u003c\/strong\u003e\u003cbr\u003e\n Cardboard Box\u003cbr\u003e\n \u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003cbr\u003e\n 9.5 x 2.25 x 7 (24.1 x 5.71 x 17.8 cm)\u003cbr\u003e\n \u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003cbr\u003e\n 2.64 lbs\u003cbr\u003e\n \u003cstrong\u003eUnit weight\u003c\/strong\u003e\u003cbr\u003e\n 2.3 lbs\u003cbr\u003e\n \u003cstrong\u003eTariff code\u003c\/strong\u003e\u003cbr\u003e\n 8543.70.9960\u003c\/p\u003e","brand":"RDL","offers":[{"title":"Default Title","offer_id":42792654962885,"sku":"RDL-SFTPS24A","price":657.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/7a36469f-75c7-40c8-bb58-b5f8da4c83fc.jpg?v=1737420066"},{"product_id":"toa-electronics-nx-300w-network-audio-adapter","title":"TOA Electronics NX-300W Network Audio Adapter","description":"\u003ch2\u003eTOA NX-300W Networked Audio Processor - Advanced Audio Networking and Real-Time Signal Transmission\u003c\/h2\u003e\n\n\u003cp\u003eThe TOA NX-300W Networked Audio Processor is an innovative audio adapter designed to seamlessly transmit high-quality audio signals and control information over existing LAN or WAN networks. Utilizing packet audio technology, the NX-300W ensures real-time transmission, allowing for flawless audio delivery without the need for additional wiring. This feature makes it an ideal solution for large-scale audio systems where maintaining consistent quality is essential, such as in broadcasting, industrial settings, and public address applications.\u003c\/p\u003e\n\n\u003cp\u003eWith the ability to transmit audio and control signals simultaneously, the NX-300W is perfect for environments where both high-quality sound and control functionality are crucial. It supports up to 8 different priority levels for broadcasting audio files, enabling flexibility in managing audio content across multiple locations. The device’s dual-channel full-duplex capability allows for bi-directional transmission of dual mono signals, making it a versatile addition to any professional audio network. Whether used for system intercoms, announcements, or background music, the NX-300W provides the reliability and scalability needed for demanding applications.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, the NX-300W offers exceptional scalability. Up to 500 NX-300 units can be interconnected via a single LAN, allowing for expansive audio networks. Each audio signal can be streamed to a maximum of 16 NX-300Ws using unicast transmission or 64 NX-300Ws using multicast transmission, ensuring that audio content can be delivered simultaneously across a vast number of devices. This makes the NX-300W a powerful choice for enterprises that need to maintain synchronized audio throughout a large facility or across multiple locations.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAudio Input:\u003c\/strong\u003e 2 channels, balanced (transformer isolated)\/unbalanced changeable, volume adjustable.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAudio Output:\u003c\/strong\u003e 2 channels, balanced (transformer isolated), 600 Ω or less.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAudio Format:\u003c\/strong\u003e WAV file support, sub-band ADPCM encoding.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eControl Inputs\/Outputs:\u003c\/strong\u003e 8 control input channels, open collector outputs, relay outputs.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNetwork Connectivity:\u003c\/strong\u003e 10BASE-T\/100BASE-TX, supporting TCP, UDP, HTTP, RTP, and more.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eVoice Sampling:\u003c\/strong\u003e 8 kHz, 16 kHz, 32 kHz, and 48 kHz (software-controllable).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Supports up to 32 GB SD\/SDHC card for log storage (max. 10,000 entries).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMounting Options:\u003c\/strong\u003e Rack, desk, or surface mountable, with optional rack or wall mounting brackets.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -10°C to +50°C (14°F to 122°F).\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eScalability:\u003c\/strong\u003e Up to 500 units can be connected over LAN, with up to 1,000 links.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBroadcast Capability:\u003c\/strong\u003e Up to 16 NX-300W devices for unicast and 64 devices for multicast transmissions from one audio input.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e: Supplied from an external 24 V DC (21.6 - 26.4 V) power supply or AC adapter AD-246 (option) or equivalent.\u003cbr\u003e\n\u003cstrong\u003eCurrent Consumption\u003c\/strong\u003e: 10 W (AC operation), 310 mA (DC operation).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAudio Input\u003c\/strong\u003e: 2 channels, balanced (transformer isolated)\/unbalanced changeable, 2 kΩ, LINE\/MIC changeable, volume adjustable.\u003cbr\u003e\n\u003cstrong\u003eRated Input\u003c\/strong\u003e: -20 dB (*2) (LINE)\/-60 dB (*2) (MIC).\u003cbr\u003e\n\u003cstrong\u003ePAD Function\u003c\/strong\u003e: -16 dB (*2), removable terminal block (6 pins).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAudio Output\u003c\/strong\u003e: 2 channels, balanced (transformer isolated), 600 Ω or less.\u003cbr\u003e\n\u003cstrong\u003eRated Output\u003c\/strong\u003e: 0 dB (*2) (unbalanced input)\/-2 dB (*2) (balanced input), removable terminal block (6 pins).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 50 Hz - 18 kHz (48 kHz sampling frequency, PCM, 0 to -6 dB deviation referred to 1 kHz).\u003cbr\u003e\n\u003cstrong\u003eDistortion\u003c\/strong\u003e: 0.2 % or less (1 kHz, LINE signal level, 48 kHz sampling frequency, PCM, BPF).\u003cbr\u003e\n\u003cstrong\u003eSignal to Noise Ratio\u003c\/strong\u003e: 73 dB or more (LINE signal level, at rated output).\u003cbr\u003e\n\u003cstrong\u003eSeparation\u003c\/strong\u003e: 70 dB or more (1 kHz, LINE signal level, BPF).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAudio Format\u003c\/strong\u003e: WAV file.\u003cbr\u003e\n\u003cstrong\u003eNumber of Storable Audio Files\u003c\/strong\u003e: Max. 8.\u003cbr\u003e\n\u003cstrong\u003eStorable Time of Audio File\u003c\/strong\u003e: Max. 2 min. per audio file (16 kHz sampling frequency, sub-band ADPCM, monaural operation).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eControl Input\u003c\/strong\u003e: 8 channels, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (9 pins). (Only Channel 8 equipped with failure detection.)\u003cbr\u003e\n\u003cstrong\u003eControl Output\u003c\/strong\u003e: 8 channels, open collector output (polarized), withstand voltage: 30 V DC, control current: 50 mA max., removable terminal block (9 pins).\u003cbr\u003e\n\u003cstrong\u003eRelay Output\u003c\/strong\u003e: 2 channels, non-polarized, withstand voltage: 30 V DC, control current: 500 mA max., removable terminal block (4 pins).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNetwork I\/F\u003c\/strong\u003e: 10BASE-T\/100BASE-TX, Full-duplex\/Half-duplex Auto-negotiation.\u003cbr\u003e\n\u003cstrong\u003eNetwork Protocol\u003c\/strong\u003e: TCP, UDP, ARP, HTTP, RTP, IGMP, FTP, NTP.\u003cbr\u003e\n\u003cstrong\u003eAudio Packet Transmission System\u003c\/strong\u003e: Unicast (Up to 16 simultaneous transmissions), Multicast (Up to 64 simultaneous transmissions).\u003cbr\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e: RJ45 connector.\u003cbr\u003e\n\u003cstrong\u003eVoice Sampling Frequency\u003c\/strong\u003e: 8 kHz, 16 kHz, 32 kHz, 48 kHz (controllable on the software).\u003cbr\u003e\n\u003cstrong\u003eQuantizing Bit Number\u003c\/strong\u003e: 16 bits.\u003cbr\u003e\n\u003cstrong\u003eVoice Encoding Method\u003c\/strong\u003e: PCM, Sub-band ADPCM (controllable on the software).\u003cbr\u003e\n\u003cstrong\u003eVoice Packet Loss Recovery\u003c\/strong\u003e: Silence insertion.\u003cbr\u003e\n\u003cstrong\u003eAudio Delay Time\u003c\/strong\u003e: Min. 20 ms.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSD Section\u003c\/strong\u003e: For log storage (Max. 10,000 entries).\u003cbr\u003e\n\u003cstrong\u003eMedia\u003c\/strong\u003e: SD\/SDHC card (Max. 32 GB) (*3).\u003cbr\u003e\n\u003cstrong\u003eFile System\u003c\/strong\u003e: FAT16, FAT32.\u003cbr\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Rack, Desk, Surface mount.\u003cbr\u003e\n\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: -10 °C to +50 °C (14 °F to 122 °F), 0 °C to +40 °C (32 °F to 104 °F) when AC adapter is in use.\u003cbr\u003e\n\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e: 90 %RH or less (no condensation).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 8.27\" x 1.74\" x 10.16\"\u003cbr\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.75 lb.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e: Removable terminal plug (3 pins) x 1, Removable terminal plug (6 pins) x 2, Removable terminal plug (9 pins) x 2, Removable terminal plug (4 pins) x 1, Plastic foot x 4, Screw for fitting plastic foot x 4.\u003cbr\u003e\n\u003cstrong\u003eOptional Accessories\u003c\/strong\u003e: Rack mounting bracket: MB-15B-BK (for rack mounting one NX-300 unit), MB-15B-J (for rack mounting two NX-300 units), Wall mounting bracket: YC-850, AC adapter: AD-246.\u003c\/p\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":44223361810629,"sku":"TOA-NX300PS","price":2723.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/5bcfbe1e-d945-4db6-88d3-34f4f124e695.jpg?v=1737502621"},{"product_id":"atlasied-1522aiolr-2x2-cobranet-audio-i-o-module-with-logic-and-relays","title":"AtlasIED 1522AIOLR 2x2 CobraNet Audio I\/O Module with Logic and Relays","description":"\u003cdiv class=\"product-description\"\u003e\n \u003ch2\u003eAtlasIED 1522AIOLR 2x2 CobraNet Audio Module with DSP and Control I\/O\u003c\/h2\u003e\n \u003cp\u003eThe IED1522AIOLR is a versatile 2-input, 2-output CobraNet audio interface engineered for seamless integration into professional sound systems. It converts two balanced mic\/line analog inputs into CobraNet digital audio while simultaneously decoding two CobraNet channels into balanced line-level outputs. Ideal for expanding existing CobraNet systems, this module offers rich control and processing capabilities.\u003c\/p\u003e\n \u003cp\u003eFeaturing individually selectable 48V phantom power, software-adjustable input\/output levels, and built-in DSP—including parametric EQ, delay, and compander\/limiter—the 1522AIOLR is suitable for precision audio environments. With four opto-isolated GPIO inputs and four relay outputs, it also supports external triggering and control. The unit is powered via IEEE 802.3af PoE and supports redundant CobraNet connectivity.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e2x2 Audio I\/O:\u003c\/strong\u003e Simultaneous analog-to-CobraNet and CobraNet-to-analog conversion\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMic\/Line Inputs:\u003c\/strong\u003e Balanced, software-controlled levels from -50 to +24dBu with 48V phantom\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBalanced Outputs:\u003c\/strong\u003e Line-level with adjustable output up to +24dBu\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIntegrated DSP:\u003c\/strong\u003e EQ, delay, and dynamic processing on each channel\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGPIO:\u003c\/strong\u003e 4 opto-isolated inputs and 4 relay outputs for external control\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRedundant CobraNet:\u003c\/strong\u003e Ensures robust network audio performance\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePoE Powered:\u003c\/strong\u003e Compliant with IEEE 802.3af\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1522AIOLR\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInput\/Output:\u003c\/strong\u003e 2 Balanced Mic\/Line In, 2 Balanced Line Out\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInput Level:\u003c\/strong\u003e -50 to +24 dBu (1dB increments)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e -10 to +24 dBu (1dB steps)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e \u0026gt;100 dB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e \u0026lt; -88 dB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSample Rate:\u003c\/strong\u003e 48kHz\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCobraNet:\u003c\/strong\u003e 100BaseT Ethernet, RJ-45, 1.33–5.33ms latency\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e IEEE 802.3af PoE\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 36 months from date of purchase\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AtlasIED","offers":[{"title":"Default Title","offer_id":44887269638341,"sku":"ATS-IED1522AIOLR","price":2491.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-atlasied-ied1522aiolr_f6e5d128-e733-4ea6-b7e5-079cb94bda39.jpg?v=1751921767"},{"product_id":"atlasied-1544aio-d-4x4-audio-i-o-module-with-poe-and-dante","title":"AtlasIED 1544AIO‑D 4×4 Audio I\/O Module with PoE and Dante","description":"\u003cdiv class=\"product-description\"\u003e\n \u003ch2\u003eAtlasIED 1544AIO‑D 4×4 Audio I\/O Module with PoE and Dante\u003c\/h2\u003e\n \u003cp\u003eThe AtlasIED IED1544AIO‑D is a versatile 4-input, 4-output analog pre-amplifier designed to convert mic\/line signals into Dante® network audio and vice versa. Perfect for professional AV installations, it supports seamless audio transport across standard IP networks. Each of the four balanced inputs can be configured for mic or line level input—with selectable gain and phantom power—while the four balanced outputs send Dante signals back to analog destinations.\u003c\/p\u003e\n \u003cp\u003eEquipped with PoE power and LED indicators for input signal, peak status, network connection, and audio activity, the IED1544AIO‑D offers flexible integration. In GLOBALCOM® GCK and EN5400 systems, the module operates in a 2x2 mode (two inputs + two outputs), but under EN5400 all four outputs can function if connected to no more than two separate sources.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDante® I\/O:\u003c\/strong\u003e 4 analog inputs + 4 analog outputs over Dante®\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSelectable Mic\/Line Inputs:\u003c\/strong\u003e Phantom power and adjustable gain\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLED Monitoring:\u003c\/strong\u003e Signal, peak, network, and power indicators\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePoE Powered:\u003c\/strong\u003e No external power supply needed\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGLOBALCOM® Compatible:\u003c\/strong\u003e Supports GCK and EN5400 integration scenarios\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1544AIO‑D\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.55 × 3.27 × 1.75 inches (166 × 83 × 44 mm)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 lb (550 g)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 2.2kΩ balanced\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 600Ω balanced\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 20Hz – 20kHz (±2dB)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.06% @ 1kHz\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSNR:\u003c\/strong\u003e 110dB @ 1kHz\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 5W via IEEE 802.3af PoE\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AtlasIED","offers":[{"title":"Default Title","offer_id":44887270719685,"sku":"ATS-IED1544AIOD","price":982.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-atlasied-ied1544aio-d_1b4f41b3-41ad-48e3-94cc-c6721971c350.jpg?v=1751921786"},{"product_id":"atlasied-5432dzm-digital-zone-manager-with-32-supervised-outputs-en54-16-certified","title":"AtlasIED 5432DZM Digital Zone Manager with 32 Supervised Outputs, EN54-16 Certified","description":"\u003cdiv class=\"product-description\"\u003e\n \u003ch2\u003eAtlasIED 5432DZM Digital Zone Manager with 32 Supervised Outputs, EN54-16 Certified\u003c\/h2\u003e\n \u003cp\u003eThe AtlasIED 5432DZM Digital Zone Manager manages up to 32 paging zones and delivers DSP control for four amplifier channels in integration with the IED 5400 Announcement Control System. It connects via Dante™ audio networking and supports high-efficiency zone distribution through relay switching.\u003c\/p\u003e\n \u003cp\u003eEach channel includes gain control, routing, ducking, EQ (high\/low pass filters, 7-band parametric), and delay of up to 40 milliseconds. Amplifier outputs loop back into the 5432DZM, which then routes them to up to eight supervised speaker lines per channel. Redundant Ethernet and automatic backup amplifier switching ensure fail-safe performance for mission-critical paging and safety systems.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eZone management:\u003c\/strong\u003e Supports 4 inputs and 32 supervised speaker line outputs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDSP control:\u003c\/strong\u003e Gain, routing, ducking, EQ, delay per channel\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRelay-based distribution:\u003c\/strong\u003e Groups of 8 zones per channel with up to 500W amplifier support\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDante audio:\u003c\/strong\u003e 4-channel input over Ethernet with redundant ports\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBackup switching:\u003c\/strong\u003e Automatically redirects speaker loads upon amp failure\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFull supervision:\u003c\/strong\u003e Integrated monitoring of amp and speaker lines\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 5432DZM\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 19.0 x 10.0 x 3.5 inches (483 x 254 x 89 mm)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e 4 x Dante audio inputs, redundant Ethernet, 12–24 VDC power\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AtlasIED","offers":[{"title":"Default Title","offer_id":44887274193093,"sku":"ATS-IED5432DZM","price":9452.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-atlasied-ied5432dzm_629c90d0-17d4-48ab-8911-21dda02cee28.jpg?v=1751921851"},{"product_id":"atlona-at-gain-net-networked-audio-interface-card-for-gain-120","title":"Atlona AT-GAIN-NET Networked Audio Interface Card for Gain 120","description":"\u003cdiv class=\"product-description\"\u003e\n \u003ch2\u003eAtlona AT-GAIN-NET Networked Audio Interface Card for Gain 120\u003c\/h2\u003e\n \n \u003cp\u003eThe Atlona AT-GAIN-NET is a compact interface card designed to upgrade the Gain 120 power amplifier with networked audio functionality. It enables dual-channel audio reception over IP using AES67 or Dante protocols, allowing seamless integration with OmniStream AV encoders and Dante\/AES67-equipped DSP systems.\u003c\/p\u003e\n \n \u003cp\u003eBuilt for professional AV installations, this interface supports plug-and-play field installation into the Gain 120 chassis. With AES67\/Dante compatibility, network audio routing, and 100 Mbps Ethernet connectivity, it brings modern, network-based audio into existing amplifier deployments with ease.\u003c\/p\u003e\n \n \u003cp\u003eIdeal for system integrators and AV professionals looking to upgrade or retrofit sound reinforcement systems with audio over IP, the AT-GAIN-NET offers flexibility and future-readiness in a compact form factor.\u003c\/p\u003e\n \n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eNetwork Audio Interface:\u003c\/strong\u003e Adds AES67 and Dante dual-channel audio input capability to the Gain 120 amplifier.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Installation:\u003c\/strong\u003e Field-installable card designed specifically for Gain 120 chassis.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP Audio Routing:\u003c\/strong\u003e Receives two channels of networked audio over IP from compatible encoders or devices.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProtocol Support:\u003c\/strong\u003e Dante, AES67, mDNS, PTP, SAP, TFTP for integrated network workflows.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProfessional Integration:\u003c\/strong\u003e Designed for Dante Controller and AES67 systems, ideal for AV-over-IP deployments.\u003c\/li\u003e\n \u003c\/ul\u003e\n \n \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAudio Format:\u003c\/strong\u003e AES67, Dante\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNetwork Channels:\u003c\/strong\u003e 2 input channels\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNetwork Port:\u003c\/strong\u003e 1 × RJ-45 (100 Mbps)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.24 in × 4.80 in × 0.71 in (57 mm × 122 mm × 18 mm)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 0.5 W (powered via Gain 120)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 32 to 122 °F (0 to 50 °C)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -40 to 158 °F (-40 to 70 °C)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e Up to 90% RH, non-condensing\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/propshort.png\" alt=\"\" width=\"350\" height=\"43\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Atlona","offers":[{"title":"Default Title","offer_id":45268567195845,"sku":"AT-ATGAINNET","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-atlona-at-gain-net_dd7760ed-0a58-4e5c-9759-769fecc78d92.jpg?v=1761838118"},{"product_id":"behringer-p16-d-16-channel-digital-ultranet-distributor","title":"Behringer P16-D 16-Channel Digital ULTRANET Distributor","description":"\u003ch1\u003eBehringer P16-D 16-Channel Digital ULTRANET Distributor\u003c\/h1\u003e\n\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\nThe Behringer P16-D is a distribution hub designed for expanding the POWERPLAY P16 personal monitoring system. It takes a single ULTRANET input and outputs eight ULTRANET RJ-45 ports, enabling up to eight branches of 16-channel digital audio and bus power. Compatible with ULTRANET input modules and personal mixers, it streamlines monitor distribution and system scalability for live and studio applications.\n\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003eOne ULTRANET input feeds eight ULTRANET RJ-45 outputs for system expansion\u003c\/li\u003e\n \u003cli\u003e16 channels of digital audio distributed to all eight outputs\u003c\/li\u003e\n \u003cli\u003eBuilt-in bus power supplies P16-M personal mixers without separate adapters\u003c\/li\u003e\n \u003cli\u003eStatus LED indicators for the ULTRANET input and each output port\u003c\/li\u003e\n \u003cli\u003eInternal autoranging power supply for 100-240 V operation\u003c\/li\u003e\n \u003cli\u003eRugged housing built for the demands of live sound, installations, and touring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003eDigital Channels: 16 channels of ULTRANET audio\u003c\/li\u003e\n \u003cli\u003eInputs: 1 x RJ-45 ULTRANET input\u003c\/li\u003e\n \u003cli\u003eOutputs: 8 x RJ-45 ULTRANET outputs\u003c\/li\u003e\n \u003cli\u003eCable Type: Shielded CAT5 (max recommended length 246 ft \/ 75 m)\u003c\/li\u003e\n \u003cli\u003ePower Supply: Internal autorange 100-240 V AC\u003c\/li\u003e\n \u003cli\u003ePower Consumption: Approximately 40 W\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":45361586602181,"sku":"BEHR-SIGPRSS-P16D","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-behringer-behr-sigprss-p16d_7fa20564-5463-415f-a006-d9fd9e352d01.jpg?v=1763396580"},{"product_id":"behringer-p16-d-16-channel-digital-ultranet-distributor-used","title":"Behringer P16-D 16-Channel Digital ULTRANET Distributor (Used)","description":"\u003cp\u003e\u003cstrong\u003eGreat\u003c\/strong\u003e: Minimal signs of use.\u003c\/p\u003e\n\u003ch1\u003eBehringer P16-D 16-Channel Digital ULTRANET Distributor\u003c\/h1\u003e\n\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\nThe Behringer P16-D is a distribution hub designed for expanding the POWERPLAY P16 personal monitoring system. It takes a single ULTRANET input and outputs eight ULTRANET RJ-45 ports, enabling up to eight branches of 16-channel digital audio and bus power. Compatible with ULTRANET input modules and personal mixers, it streamlines monitor distribution and system scalability for live and studio applications.\n\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003eOne ULTRANET input feeds eight ULTRANET RJ-45 outputs for system expansion\u003c\/li\u003e\n \u003cli\u003e16 channels of digital audio distributed to all eight outputs\u003c\/li\u003e\n \u003cli\u003eBuilt-in bus power supplies P16-M personal mixers without separate adapters\u003c\/li\u003e\n \u003cli\u003eStatus LED indicators for the ULTRANET input and each output port\u003c\/li\u003e\n \u003cli\u003eInternal autoranging power supply for 100-240 V operation\u003c\/li\u003e\n \u003cli\u003eRugged housing built for the demands of live sound, installations, and touring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003eDigital Channels: 16 channels of ULTRANET audio\u003c\/li\u003e\n \u003cli\u003eInputs: 1 x RJ-45 ULTRANET input\u003c\/li\u003e\n \u003cli\u003eOutputs: 8 x RJ-45 ULTRANET outputs\u003c\/li\u003e\n \u003cli\u003eCable Type: Shielded CAT5 (max recommended length 246 ft \/ 75 m)\u003c\/li\u003e\n \u003cli\u003ePower Supply: Internal autorange 100-240 V AC\u003c\/li\u003e\n \u003cli\u003ePower Consumption: Approximately 40 W\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":45457460887749,"sku":"BEHR-SIGPRSS-P16D-BB","price":118.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-behringer-behr-sigprss-p16d_7fa20564-5463-415f-a006-d9fd9e352d01.jpg?v=1763396580"},{"product_id":"auvitran-av-wall-dt4o-b-dante-wall-plate-audio-interface-with-xlr-line-outputs-and-bluetooth","title":"AuviTran AV-WALL-DT4o-B Dante Wall Plate Audio Interface with XLR Line Outputs and Bluetooth","description":"\u003ch2\u003eAuviTran AV-WALL-DT4o-B Dante Wall Plate Audio Interface with Bluetooth Output\u003c\/h2\u003e \u003cp\u003eThe AuviTran AV-WALL-DT4o-B is a compact Dante-enabled wall mounted audio interface designed to provide seamless integration between networked audio systems and analog outputs. Designed for professional AV installations, this ultra-compact interface converts Dante network audio to analog outputs while offering built-in Bluetooth connectivity for wireless audio streaming.\u003c\/p\u003e \u003cp\u003eEngineered for flexibility and simple installation, the DT4o-B fits into a standard single-gang wall box and is powered via Power over Ethernet (PoE), allowing audio, power, and control to be delivered through a single network cable. A rotary push button and integrated OLED display allow quick pairing and device selection for Bluetooth sources, while Dante sources can be selected directly without external patching software.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDante network to analog audio interface for wall mounting\u003c\/li\u003e \u003cli\u003e2 balanced XLR analog line outputs\u003c\/li\u003e \u003cli\u003eIntegrated stereo Bluetooth output\u003c\/li\u003e \u003cli\u003eOLED display with rotary push button for local control\u003c\/li\u003e \u003cli\u003ePoE powered via RJ45 (802.3af compliant)\u003c\/li\u003e \u003cli\u003eCompact design fits a standard single-gang wall box\u003c\/li\u003e \u003cli\u003eRemote monitoring and configuration through AVS Monitor and Dante Controller\u003c\/li\u003e \u003cli\u003eCompatible with Apple and Android Bluetooth devices\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOutputs: 2 x XLR line outputs + stereo Bluetooth output\u003c\/li\u003e \u003cli\u003eOutput Level (XLR): +24 dBu\u003c\/li\u003e \u003cli\u003eDynamic Range: \u0026gt;106 dB (A-weighted)\u003c\/li\u003e \u003cli\u003eFrequency Response: 20 Hz – 20 kHz\u003c\/li\u003e \u003cli\u003eSampling Rates: 44.1 \/ 48 \/ 88.2 \/ 96 kHz\u003c\/li\u003e \u003cli\u003eBit Depth: 24 or 32 bit\u003c\/li\u003e \u003cli\u003ePower: PoE (IEEE 802.3af)\u003c\/li\u003e \u003cli\u003eMaximum Power Consumption: 5.5 W\u003c\/li\u003e \u003cli\u003eDimensions (in-wall): 49 x 47 x 46 mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"AuviTran","offers":[{"title":"Default Title","offer_id":45936410099909,"sku":"AUV-DT4OB","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/3996d9db6e0678be6ac9dec1ec557254.jpg?v=1772838603"},{"product_id":"auvitran-av-wall-dt4o-dante-wall-plate-audio-output-interface-with-dual-xlr-outputs","title":"AuviTran AV-WALL-DT4o Dante Wall Plate Audio Output Interface with Dual XLR Outputs","description":"\u003ch2\u003eAuviTran AV-WALL-DT4o Dante Wall Plate Audio Output Interface\u003c\/h2\u003e \u003cp\u003eThe AuviTran AV-WALL-DT4o is a compact Dante network audio interface designed for professional wall-mounted installations. It converts Dante digital audio streams into analog outputs for integration with amplifiers, mixers, and other professional audio equipment.\u003c\/p\u003e \u003cp\u003eWith its ultra-compact form factor, the DT4o fits into a standard single-gang junction box and is powered via PoE, requiring only a single Cat5e\/Cat6 cable for audio, power, and control. This streamlined installation makes it ideal for conference rooms, broadcast environments, classrooms, and commercial AV systems.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDante network to analog audio interface\u003c\/li\u003e \u003cli\u003e2 balanced XLR line outputs\u003c\/li\u003e \u003cli\u003ePower over Ethernet (PoE) operation\u003c\/li\u003e \u003cli\u003eCompact wall plate design for clean installations\u003c\/li\u003e \u003cli\u003eRemote monitoring and configuration via AVS Monitor and Dante Controller\u003c\/li\u003e \u003cli\u003eSingle RJ45 connection for audio, control, and power\u003c\/li\u003e \u003cli\u003eDesigned for professional AV and network audio systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOutputs: 2 x balanced XLR line outputs\u003c\/li\u003e \u003cli\u003eSampling Rates: 44.1 \/ 48 \/ 88.2 \/ 96 kHz\u003c\/li\u003e \u003cli\u003eBit Depth: 24 or 32 bit\u003c\/li\u003e \u003cli\u003eFrequency Response: 20 Hz – 20 kHz\u003c\/li\u003e \u003cli\u003eDynamic Range: \u0026gt;106 dB A-weighted\u003c\/li\u003e \u003cli\u003eOutput Max Level: +24 dBu\u003c\/li\u003e \u003cli\u003ePower: PoE (IEEE 802.3af)\u003c\/li\u003e \u003cli\u003eMaximum Power Consumption: 5.5 W\u003c\/li\u003e \u003cli\u003eDimensions: 49 x 47 x 46 mm (in-wall depth)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AuviTran","offers":[{"title":"Default Title","offer_id":45936410296517,"sku":"AUV-DT4O","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/3996d9db6e0678be6ac9dec1ec557254_be82163b-18c7-440c-a58b-5848d0f75c79.jpg?v=1772838618"},{"product_id":"auvitran-av-wall-dt4o-le-dante-wall-plate-interface-with-xlr-outputs-and-3-5mm-stereo-output","title":"AuviTran AV-WALL-DT4o-LE Dante Wall Plate Interface with XLR Outputs and 3.5mm Stereo Output","description":"\u003ch2\u003eAuviTran AV-WALL-DT4o-LE Dante Wall Plate Audio Interface\u003c\/h2\u003e \u003cp\u003eThe AuviTran AV-WALL-DT4o-LE is a compact Dante-enabled wall plate interface designed to convert network audio streams to analog outputs for professional AV systems. This streamlined version replaces Bluetooth output with a 3.5 mm stereo mini-jack output while maintaining the same high-performance Dante integration.\u003c\/p\u003e \u003cp\u003ePowered via PoE, the DT4o-LE simplifies installations by delivering power, control, and audio through a single network cable. The compact form factor fits into a standard single-gang junction box, making it ideal for conference rooms, meeting spaces, and commercial AV environments.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDante network audio to analog output interface\u003c\/li\u003e \u003cli\u003e2 balanced XLR analog line outputs\u003c\/li\u003e \u003cli\u003eStereo 3.5 mm mini-jack output\u003c\/li\u003e \u003cli\u003ePoE powered (IEEE 802.3af)\u003c\/li\u003e \u003cli\u003eCompact wall-mounted design\u003c\/li\u003e \u003cli\u003eRemote monitoring and configuration via AVS Monitor\u003c\/li\u003e \u003cli\u003eSimple installation with single network cable\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOutputs: 2 x XLR line outputs + stereo 3.5 mm mini-jack\u003c\/li\u003e \u003cli\u003eSampling Rates: 44.1 \/ 48 \/ 88.2 \/ 96 kHz\u003c\/li\u003e \u003cli\u003eBit Depth: 24 or 32 bit\u003c\/li\u003e \u003cli\u003eFrequency Response: 20 Hz – 20 kHz\u003c\/li\u003e \u003cli\u003eDynamic Range: \u0026gt;104 dB (mini-jack)\u003c\/li\u003e \u003cli\u003eOutput Level: +24 dBu (XLR)\u003c\/li\u003e \u003cli\u003ePower: PoE (802.3af)\u003c\/li\u003e \u003cli\u003eMaximum Power Consumption: 5.5 W\u003c\/li\u003e \u003cli\u003eDimensions: 49 x 47 x 46 mm (in-wall)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AuviTran","offers":[{"title":"Default Title","offer_id":45936410493125,"sku":"AUV-DT4OLE","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/c4a71339e1d0bed7ffafa955fb451254.jpg?v=1772838632"},{"product_id":"auvitran-av-wall-dt4i-b-dante-wall-plate-mic-line-interface-with-bluetooth-and-xlr-inputs","title":"AuviTran AV-WALL-DT4i-B Dante Wall Plate Mic\/Line Interface with Bluetooth and XLR Inputs","description":"\u003ch2\u003eAuviTran AV-WALL-DT4i-B Dante Wall Plate Mic\/Line Interface with Bluetooth\u003c\/h2\u003e \u003cp\u003eThe AuviTran AV-WALL-DT4i-B is a professional Dante-enabled wall plate interface designed to connect microphones, line sources, and Bluetooth audio directly to a Dante audio network. Its ultra-compact design allows installation in a standard single-gang wall box while delivering professional-grade audio performance.\u003c\/p\u003e \u003cp\u003eThis interface includes two XLR microphone\/line inputs with phantom power and a stereo mini-jack input for additional audio sources. Integrated mixing allows up to four input signals to be routed to Dante network channels, making the DT4i-B ideal for conference rooms, lecture halls, and AV installations.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDante network microphone\/line input interface\u003c\/li\u003e \u003cli\u003e2 XLR microphone\/line inputs with +48V phantom power\u003c\/li\u003e \u003cli\u003eStereo 3.5 mm mini-jack input\u003c\/li\u003e \u003cli\u003eOptional Bluetooth audio integration\u003c\/li\u003e \u003cli\u003eInternal mixing of up to four audio inputs\u003c\/li\u003e \u003cli\u003eRotary push button for local control\u003c\/li\u003e \u003cli\u003ePoE powered via RJ45\u003c\/li\u003e \u003cli\u003eFits standard single-gang wall box\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInputs: 2 XLR mic\/line + stereo 3.5 mm mini-jack\u003c\/li\u003e \u003cli\u003eSampling Rates: 44.1 \/ 48 \/ 88.2 \/ 96 kHz\u003c\/li\u003e \u003cli\u003eBit Depth: 24 or 32 bit\u003c\/li\u003e \u003cli\u003eInput Sensitivity (XLR): +24 dBu to -40 dBu\u003c\/li\u003e \u003cli\u003eDynamic Range: \u0026gt;101 dB\u003c\/li\u003e \u003cli\u003eFrequency Response: 20 Hz – 20 kHz\u003c\/li\u003e \u003cli\u003ePhantom Power: +48 V per channel\u003c\/li\u003e \u003cli\u003ePower: PoE (IEEE 802.3af)\u003c\/li\u003e \u003cli\u003eMaximum Consumption: 5.5 W\u003c\/li\u003e \u003c\/ul\u003e","brand":"AuviTran","offers":[{"title":"Default Title","offer_id":45936410591429,"sku":"AUV-DT4IB","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/c4a71339e1d0bed7ffafa955fb451254_e731d9c3-1337-4c63-a7b5-2572b7d958a2.jpg?v=1772838645"},{"product_id":"auvitran-av-wall-dt2i-b-dante-wall-plate-bluetooth-audio-input-interface","title":"AuviTran AV-WALL-DT2i-B Dante Wall Plate Bluetooth Audio Input Interface","description":"\u003ch2\u003eAuviTran AV-WALL-DT2i-B Dante Bluetooth Audio Input Wall Plate\u003c\/h2\u003e \u003cp\u003eThe AuviTran AV-WALL-DT2i-B is a compact wall-mounted Bluetooth audio interface designed to send wireless audio directly into a Dante network. Built for modern AV installations, this interface enables easy wireless audio streaming from smartphones, tablets, and other Bluetooth devices.\u003c\/p\u003e \u003cp\u003eDesigned for simple installation, the DT2i-B fits a standard single-gang wall box and is powered via PoE, allowing audio, control, and power to be delivered through a single Cat5e\/Cat6 cable. The integrated Bluetooth input routes stereo audio to two Dante channels, making it ideal for conference rooms, presentation spaces, and collaborative environments.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBluetooth to Dante network audio interface\u003c\/li\u003e \u003cli\u003eInternal stereo Bluetooth input linked to Dante channels\u003c\/li\u003e \u003cli\u003eCompact wall plate design\u003c\/li\u003e \u003cli\u003eRemote level adjustment in 1 dB steps\u003c\/li\u003e \u003cli\u003ePoE powered for simplified installation\u003c\/li\u003e \u003cli\u003eSingle RJ45 connection for power, control, and audio\u003c\/li\u003e \u003cli\u003eCompatible with common Bluetooth devices\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDante Channels: 2 transmit channels\u003c\/li\u003e \u003cli\u003ePower: PoE (IEEE 802.3af)\u003c\/li\u003e \u003cli\u003eMaximum Power Consumption: 5.5 W\u003c\/li\u003e \u003cli\u003eSampling Rates: 44.1 \/ 48 \/ 88.2 \/ 96 kHz\u003c\/li\u003e \u003cli\u003eBit Depth: 24 or 32 bit\u003c\/li\u003e \u003cli\u003eInstallation: Single-gang wall box\u003c\/li\u003e \u003cli\u003eDimensions (in-wall): 49 x 47 x 46 mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"AuviTran","offers":[{"title":"Default Title","offer_id":45936411967685,"sku":"AUV-DT2IB","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/199e28e67ede2de69042917e84fe40c1_0402f68a-f67f-45e4-89b2-9092b989a83b.jpg?v=1772838672"}],"url":"https:\/\/avlgear.com\/collections\/commercial-network-audio.oembed","provider":"AVLGEAR","version":"1.0","type":"link"}