{"title":"Wittner","description":null,"products":[{"product_id":"wittner-mnwowl-taktell-owl-mechanical-metronome","title":"Wittner MNWOWL Taktell Owl Mechanical Metronome","description":"\u003ch2\u003eWittner Taktell Owl Mechanical Metronome\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Owl Mechanical Metronome provides an audible beat and visible pendulum movement in an owl-shaped plastic casing. Its spring-driven clockwork operates without batteries, and a sliding weight controls the practice tempo. This German-made model gives musicians a timing reference for exercises and repertoire work without an additional bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this owl-shaped practice accessory for scales, rhythmic exercises, and lesson preparation. Follow the swinging pendulum visually while listening to each mechanical tick. For slow tempo technique practice, align the weight with the desired marking and repeat difficult passages. This wind-up metronome for music lessons also helps teachers demonstrate how note values relate to a consistent pulse.\u003c\/p\u003e\n\u003cp\u003eWittner documents the owl model within Series 839 and provides instructions for winding, adjustment, and handling. A key on the right side winds the mechanism, and a gentle push starts the pendulum. Wind the spring immediately before practice rather than storing it fully wound. The manufacturer identifies this as a musical timing instrument, not a toy, and excludes use by children under six.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOwl-Shaped Casing:\u003c\/strong\u003e A distinctive plastic enclosure adds character to your practice setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the spring mechanism before use without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Beat:\u003c\/strong\u003e Follow the mechanical tick during scales, exercises, and repertoire practice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Track the swinging arm to reinforce your sense of pulse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Control:\u003c\/strong\u003e Align the movable weight with the printed scale to select your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Design:\u003c\/strong\u003e Hear the regular beat without an additional bell signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Owl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 839\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Design:\u003c\/strong\u003e Owl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Spring-driven wind-up clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Control:\u003c\/strong\u003e Key on the right side of the casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAge Restriction:\u003c\/strong\u003e Not suitable for children under six years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698937893061,"sku":"WIT-MNWOWL","price":137.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwowl_0e173793-66b7-43ea-a109-4009eafcc426.jpg?v=1792002989"},{"product_id":"wittner-mnwpb-taktell-piccolo-mechanical-metronome-black","title":"Wittner MNWPB Taktell Piccolo Mechanical Metronome, Black","description":"\u003ch2\u003eWittner Taktell Piccolo Mechanical Metronome in Black\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Piccolo Mechanical Metronome in black provides an audible tick and visible pendulum movement for music practice. Its spring-driven clockwork operates without batteries, while a sliding weight sets the tempo. This pocket-sized model features a black plastic casing and delivers regular beats without an additional bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this portable wind-up metronome for lessons, scales, and repertoire preparation. Follow the swinging arm visually while listening to each beat during rhythmic exercises. For slow tempo technique practice, align the weight with the desired marking and repeat challenging passages. Adjust the setting as your control develops, maintaining a consistent timing reference throughout each exercise.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Piccolo in Germany and provides instructions for winding, tempo selection, and transport. Its direct mechanical controls suit musicians seeking a compact pendulum metronome for home practice. The winding key stores inside the cover when carrying the unit. Wind the spring immediately before use, position the weight against the printed scale, and gently push the pendulum to begin.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Plastic Casing:\u003c\/strong\u003e A simple black enclosure gives this practice accessory an understated appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the spring mechanism before practice without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Beat:\u003c\/strong\u003e Follow the mechanical tick during exercises and repertoire work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Track the swinging arm as a visual reference for each beat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Adjustment:\u003c\/strong\u003e Align the movable weight with the scale to select your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePocket-Sized Format:\u003c\/strong\u003e Carry a portable timing reference between home practice and lessons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Design:\u003c\/strong\u003e Practice with the regular tick without an additional bell signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Keep the key inside the cover during transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Piccolo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 830\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Spring-driven wind-up clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Inside the cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698937925829,"sku":"WIT-MNWPB","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwpb_1027ae03-eb8a-4e32-ac37-93dd0d0f9962.jpg?v=1792002996"},{"product_id":"wittner-mnwpenguin-taktell-penguin-mechanical-metronome","title":"Wittner MNWPENGUIN Taktell Penguin Mechanical Metronome","description":"\u003ch2\u003eWittner Taktell Penguin Mechanical Metronome\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Penguin Mechanical Metronome provides an audible beat and visible pendulum movement in a penguin-shaped plastic casing. Its spring-driven clockwork operates without batteries, while a sliding weight sets the practice tempo. This German-made model helps musicians follow a consistent pulse during exercises and repertoire work, without a bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this penguin-shaped practice accessory for scales, rhythmic exercises, and lesson preparation. The moving pendulum offers a visual reference alongside the mechanical tick. For slow tempo technique practice, align the weight with the desired marking and repeat challenging passages. This wind-up metronome for music lessons also gives teachers a clear timing reference when demonstrating note values and rhythmic patterns.\u003c\/p\u003e\n\u003cp\u003eWittner documents the penguin model within its Series 839 mechanical metronomes and provides operating instructions for winding and adjustment. A key on the right side winds the spring, and a gentle push starts the pendulum. Wind the mechanism immediately before practice. The manufacturer specifies that this musical timing instrument is not a toy and is unsuitable for children under six.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenguin-Shaped Casing:\u003c\/strong\u003e A distinctive plastic enclosure adds character to your practice setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the spring mechanism before use without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Beat:\u003c\/strong\u003e Follow the mechanical tick during scales, exercises, and repertoire practice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Track the swinging arm to reinforce your sense of pulse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Control:\u003c\/strong\u003e Align the movable weight with the printed scale to select your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Design:\u003c\/strong\u003e Hear the regular beat without an additional bell signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Penguin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 839\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Design:\u003c\/strong\u003e Penguin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Spring-driven wind-up clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Control:\u003c\/strong\u003e Key on the right side of the casing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAge Restriction:\u003c\/strong\u003e Not suitable for children under six years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698937991365,"sku":"WIT-MNWPENGUIN","price":137.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwpenguin_84d6cc88-b1b2-426c-8f11-36ac3cf1783c.jpg?v=1792003004"},{"product_id":"wittner-mnwpi-taktell-piccolo-mechanical-metronome-ivory","title":"Wittner MNWPI Taktell Piccolo Mechanical Metronome, Ivory","description":"\u003ch2\u003eWittner Taktell Piccolo Mechanical Metronome in Ivory\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Piccolo Mechanical Metronome in ivory provides an audible tick and moving pendulum for music practice. Its spring-driven clockwork operates without batteries, while a sliding weight controls the tempo. This pocket-sized model features an ivory-colored plastic casing and supplies regular beats without an additional bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this portable wind-up metronome for lessons, scales, and repertoire preparation. Follow the pendulum visually while listening to each beat during rhythmic exercises. For slow tempo technique practice, position the weight at the desired marking and repeat challenging passages. Adjust the setting as your control develops, maintaining a consistent timing reference throughout each exercise.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Piccolo in Germany and provides instructions for winding, tempo selection, and transport. Its direct mechanical controls suit musicians seeking a compact pendulum metronome for home practice. The winding key stores inside the cover when carrying the unit. Wind the spring immediately before use, align the weight with the printed scale, and gently push the pendulum to begin.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIvory-Colored Casing:\u003c\/strong\u003e An ivory plastic enclosure gives this practice accessory a traditional appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the spring mechanism before practice without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Beat:\u003c\/strong\u003e Follow the mechanical tick during exercises and repertoire work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Track the swinging arm as a visual reference for each beat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Adjustment:\u003c\/strong\u003e Align the movable weight with the scale to select your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePocket-Sized Format:\u003c\/strong\u003e Carry a portable timing reference between home practice and lessons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Design:\u003c\/strong\u003e Practice with the regular tick without an additional bell signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Keep the key inside the cover during transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Piccolo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 830\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Ivory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Spring-driven wind-up clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Inside the cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938024133,"sku":"WIT-MNWPI","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwpi_05f62f10-de95-40ef-bc22-24fdb7180976.jpg?v=1792003011"},{"product_id":"wittner-mnwpr-taktell-piccolo-mechanical-metronome-ruby","title":"Wittner MNWPR Taktell Piccolo Mechanical Metronome, Ruby","description":"\u003ch2\u003eWittner Taktell Piccolo Mechanical Metronome in Ruby\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Piccolo Mechanical Metronome in ruby provides an audible tick and visible pendulum movement to guide music practice. Its spring-driven mechanism operates without batteries, while a sliding pendulum weight sets the tempo. This pocket-sized model features a ruby plastic casing and delivers regular beats without a bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this portable wind-up metronome for lessons, scales, and repertoire preparation. Follow the swinging arm to track the pulse visually while listening to each tick. For slow tempo technique practice, align the weight with the desired scale marking and repeat challenging passages. Adjust the setting as your control develops, keeping a consistent timing reference during each exercise.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Piccolo in Germany and provides instructions for winding, tempo selection, and transport. The mechanical controls offer direct adjustment, making this ruby practice metronome suitable for musicians who prefer a visible pendulum. The winding key stores inside the cover when carrying the unit. Wind the spring immediately before practice and gently push the pendulum to start the beat.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuby Plastic Casing:\u003c\/strong\u003e The ruby exterior gives this compact practice accessory a distinctive appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the spring mechanism before practice without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Timing:\u003c\/strong\u003e Follow the mechanical tick while working through exercises and musical passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Track the swinging arm as a visual reference for each beat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Control:\u003c\/strong\u003e Align the adjustable weight with the printed scale to select your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePocket-Sized Format:\u003c\/strong\u003e Carry a portable timing reference between home practice and lessons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Bell Accent:\u003c\/strong\u003e Practice with the regular tick without an additional bell signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Keep the key inside the cover during transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Piccolo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 830\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Ruby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Spring-driven wind-up mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinding Key Storage:\u003c\/strong\u003e Inside the cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938122437,"sku":"WIT-MNWPR","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwpr_c1e8d008-228a-4120-bc5f-febbcb7e4810.jpg?v=1792003020"},{"product_id":"wittner-mnwsb-taktell-super-mini-mechanical-metronome-black","title":"Wittner MNWSB Taktell Super-Mini Mechanical Metronome, Black","description":"\u003ch2\u003eWittner Taktell Super-Mini Mechanical Metronome in Black\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Super-Mini Mechanical Metronome in black supplies an audible tick and visible pendulum movement for music practice. Its wind-up clockwork requires no batteries, and a sliding weight sets the tempo. The compact design provides a portable timing reference for lessons, technical exercises, and repertoire practice without a bell accent.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this black pendulum metronome to guide scales, rhythmic exercises, and difficult passages. For slow tempo technique practice, align the weight with the desired marking and follow each beat. Increase the setting as your playing develops. Its small format also suits musicians seeking a portable metronome for lessons or a mechanical timing aid for home practice.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Super-Mini in Germany and documents its winding, adjustment, and storage procedures. The printed scale and moving weight provide direct tempo selection, while the pendulum offers a visual reference alongside the tick. Remove the cover before use, wind the mechanism immediately before playing, and gently start the pendulum. Secure the arm in its holder before replacing the cover.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Color:\u003c\/strong\u003e A black exterior suits a simple, understated practice setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWind-Up Movement:\u003c\/strong\u003e Operate the mechanical clockwork without batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible Timing:\u003c\/strong\u003e Follow the ticking beat during exercises and repertoire practice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Pendulum:\u003c\/strong\u003e Use the swinging arm as a visual reference for each beat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Tempo Selection:\u003c\/strong\u003e Move the sliding weight to the desired marking on the scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Format:\u003c\/strong\u003e Carry a timing reference between home practice and lessons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Operation:\u003c\/strong\u003e Hear the regular tick without an additional bell accent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Cover:\u003c\/strong\u003e Access the pendulum for practice and cover it after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Super-Mini\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Wind-up mechanical clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938187973,"sku":"WIT-MNWSB","price":171.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwsb_f2f4453e-efc8-4a34-8f46-a2c117d27208.jpg?v=1792003028"},{"product_id":"wittner-mnwsmw-taktell-super-mini-mechanical-metronome-mahogany-finish","title":"Wittner MNWSMW Taktell Super-Mini Mechanical Metronome, Mahogany Finish","description":"\u003ch2\u003eWittner Taktell Super-Mini Mechanical Metronome in Mahogany Finish\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Taktell Super-Mini Mechanical Metronome in mahogany finish provides audible beats and visible pendulum movement for music practice. Its wind-up mechanism operates without batteries, while a sliding weight controls the tempo. This compact model features a solid wood casing with a matte mahogany-colored finish and operates without a bell.\u003c\/p\u003e\n\u003cp\u003eStudents, teachers, and instrumentalists can use this portable wind-up metronome for lessons, scales, technical exercises, and repertoire preparation. The mechanical tick provides an audible pulse, while the swinging pendulum helps players follow each beat visually. For slow tempo technique practice, set the weight at the desired marking and repeat difficult passages. Adjust the setting as your control improves.\u003c\/p\u003e\n\u003cp\u003eMade in Germany, this wood-cased practice metronome combines direct mechanical adjustment with a traditional appearance. The removable cover gives access to the pendulum and printed tempo scale. Wittner provides instructions for winding, operation, and storage. Wind the mechanism immediately before playing, gently start the pendulum, and secure the arm in its holder before replacing the cover after practice.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMahogany-Colored Finish:\u003c\/strong\u003e A matte wood enclosure gives your practice setup a traditional appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Wood Casing:\u003c\/strong\u003e The enclosure uses solid wood construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-Free Operation:\u003c\/strong\u003e Wind the mechanical movement before practice without replacing batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible and Visual Timing:\u003c\/strong\u003e Follow the ticking beat and swinging pendulum as you play.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Tempo Adjustment:\u003c\/strong\u003e Align the movable weight with the printed scale to choose your practice speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Format:\u003c\/strong\u003e Keep a portable timing reference available for home practice and lessons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell-Free Design:\u003c\/strong\u003e Practice with the regular tick without an additional bell accent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Cover:\u003c\/strong\u003e Access the pendulum for use and cover it afterward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Taktell Super-Mini\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Mechanical pendulum metronome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e Solid wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Mahogany-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Wind-up mechanical clockwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Requirement:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Control:\u003c\/strong\u003e Sliding pendulum weight with printed scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeat Indication:\u003c\/strong\u003e Audible tick and visible pendulum movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBell:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover:\u003c\/strong\u003e Removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938253509,"sku":"WIT-MNWSMW","price":171.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-mnwsmw_f080a9b5-9e3e-421a-9e6c-592b95ae3eb2.jpg?v=1792003036"},{"product_id":"wittner-pgcwl1-finetune-single-cello-peg-155-mm-4-4-3-4","title":"Wittner PGCWL1 Finetune Single Cello Peg, 15.5 mm, 4\/4 - 3\/4","description":"\u003ch2\u003eWittner Finetune Single Cello Peg, 15.5 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Cello Peg in the 15.5 mm option provides geared pitch adjustment for the selected 4\/4 - 3\/4 size designation. Players tune through the peg head while the fitted outer shaft remains stationary. This individual component supports replacement of one tuning peg when its diameter and taper suit the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this option when sourcing a single replacement tuning peg or planning a measured instrument upgrade. For a geared cello peg replacement, the diameter at the ring and shaft taper help establish fit. The rotating central section carries the string during adjustment. A pegbox assessment remains essential for a cello tuning hardware upgrade because nominal instrument size does not establish existing hole dimensions.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides installation guidance for cello fittings. The composite body seats in a prepared tapered hole, with the moving string-bearing section positioned at the pegbox's inner edge. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct fitting allows the central section to rotate while the surrounding shaft stays fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15.5 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 15.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938286277,"sku":"WIT-PGCWL1","price":73.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwl1_e01e64b4-ecae-4c8a-8f56-1ac7fe9d2e08.jpg?v=1792003044"},{"product_id":"wittner-pgcwl4r-finetune-cello-pegs-large-155-mm-rosewood-color-4-pack","title":"Wittner PGCWL4R Finetune Cello Pegs, Large 15.5 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, Large 15.5 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this large 15.5 mm four-pack provide geared pitch adjustment with rosewood-colored heads. Each peg tunes through its head while the fitted outer shaft remains stationary. Wittner specifies this diameter for 4\/4 - 7\/8 cellos, with installation dependent on measured peg-hole dimensions and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this set when planning a complete cello peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 15.5 mm Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Large, 15.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Instrument Size:\u003c\/strong\u003e Cello 4\/4 - 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs with rosewood-colored heads in the large 15.5 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938351813,"sku":"WIT-PGCWL4R","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwl4r_b32fa15f-b15b-4b73-91b4-75be12ec325b.jpg?v=1792003051"},{"product_id":"wittner-pgcwl-finetune-cello-pegs-155-mm-4-4-3-4-4-pack","title":"Wittner PGCWL Finetune Cello Pegs, 15.5 mm, 4\/4 - 3\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, 15.5 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this 15.5 mm four-pack provide geared pitch adjustment for the selected 4\/4 - 3\/4 size designation. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this package when planning a complete cello peg replacement. Four same-size components support a coordinated installation when each hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing peg holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting guidance for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four tuning components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15.5 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 15.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs in the 15.5 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938384581,"sku":"WIT-PGCWL","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwl_d755c873-aa9e-4c90-a21d-4d3b7b2d042f.jpg?v=1792003058"},{"product_id":"wittner-pgcwm112-finetune-single-cello-peg-12-mm-1-2-1-4","title":"Wittner PGCWM112 Finetune Single Cello Peg, 12 mm, 1\/2 - 1\/4","description":"\u003ch2\u003eWittner Finetune Single Cello Peg, 12 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Cello Peg in the 12 mm size provides geared pitch adjustment for 1\/2 - 1\/4 cellos. Its internal reduction mechanism lets players tune by turning the peg head while the fitted outer shaft remains stationary. This individual component supports replacement of one peg when its dimensions suit the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eCellists, teachers, and repair specialists can select this option when sourcing a single replacement tuning peg for a smaller instrument. For a fractional cello tuning upgrade, the diameter at the ring and shaft taper help establish fit. Fine adjustment at the head supports controlled pitch changes during practice and preparation. A measured pegbox assessment remains essential when choosing a geared peg for cello maintenance.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides detailed fitting guidance. The composite body fits into a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess hole dimensions and position the peg correctly. Proper fitting considers the existing pegbox, string clearance, and installation depth alongside the instrument's stated size.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace one tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Cello Compatibility:\u003c\/strong\u003e Select the manufacturer-listed size for 1\/2 - 1\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Reduction Gearing:\u003c\/strong\u003e Make controlled pitch adjustments through the peg head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Construction:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Compatibility:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2 - 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Designation:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal reduction gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938417349,"sku":"WIT-PGCWM112","price":73.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwm112_b2c4726f-a5dd-4044-970e-4d068655eb8e.jpg?v=1792003066"},{"product_id":"wittner-pgcwm1-finetune-single-cello-peg-14-mm-4-4-3-4","title":"Wittner PGCWM1 Finetune Single Cello Peg, 14 mm, 4\/4 - 3\/4","description":"\u003ch2\u003eWittner Finetune Single Cello Peg, 14 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Cello Peg in the 14 mm option provides geared pitch adjustment for the selected 4\/4 - 3\/4 size designation. Its internal reduction mechanism allows controlled tuning through the peg head while the fitted outer shaft stays stationary. This individual component supports replacement when its diameter and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this option when sourcing a single replacement tuning peg or planning an instrument upgrade. For a geared cello peg replacement, the diameter at the ring and shaft taper help establish fit. Fine adjustment at the head supports measured pitch changes during practice and preparation. A pegbox assessment remains essential because the instrument's nominal size does not determine its existing hole dimensions.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting guidance for cello installations. The composite body seats in a prepared tapered hole, and the string winds around the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Correct positioning lets the moving section carry the string while the surrounding shaft remains fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Reduction Gearing:\u003c\/strong\u003e Make controlled pitch adjustments by turning the peg head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft remains fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined taper specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal reduction gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938450117,"sku":"WIT-PGCWM1","price":73.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwm1_0752194a-b777-4926-96bd-75f309e52497.jpg?v=1792003073"},{"product_id":"wittner-pgcwm412-finetune-cello-pegs-12-mm-1-2-1-4-4-pack","title":"Wittner PGCWM412 Finetune Cello Pegs, 12 mm, 1\/2 - 1\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, 12 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this 12 mm four-pack provide geared pitch adjustment for 1\/2 - 1\/4 cellos. Each peg tunes through its head while the fitted outer shaft remains stationary. The package supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eCellists, teachers, and repair specialists can select this set when planning a complete fractional cello peg replacement. Four same-size components support a coordinated installation when each hole accepts the specified fit. For a geared tuning upgrade for cello, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four tuning components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Cello Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 1\/2 - 1\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2 - 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs in the 12 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938482885,"sku":"WIT-PGCWM412","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwm412_6b584784-1206-4aac-98e0-173c0f50fe8f.jpg?v=1792003080"},{"product_id":"wittner-pgcwm4r-finetune-cello-pegs-medium-14-mm-rosewood-color-4-pack","title":"Wittner PGCWM4R Finetune Cello Pegs, Medium 14 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, Medium 14 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this medium 14 mm four-pack provide geared pitch adjustment with rosewood-colored heads. Each peg tunes through its head while the fitted outer shaft remains stationary. Wittner specifies this diameter for 4\/4 - 7\/8 cellos, with installation dependent on measured peg-hole dimensions and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this set when planning a complete cello peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium 14 mm Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Medium, 14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Instrument Size:\u003c\/strong\u003e Cello 4\/4 - 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs with rosewood-colored heads in the medium 14 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938548421,"sku":"WIT-PGCWM4R","price":232.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwm4r_f9d1c2cf-0a23-4356-8af5-d18e6bdda4ad.jpg?v=1792003087"},{"product_id":"wittner-pgcwm-finetune-cello-pegs-14-mm-4-4-3-4-4-pack","title":"Wittner PGCWM Finetune Cello Pegs, 14 mm, 4\/4 - 3\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, 14 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this 14 mm four-pack provide geared pitch adjustment for the selected 4\/4 - 3\/4 size designation. Each peg tunes through its head while the fitted outer shaft stays stationary. The set supplies four tuning components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and instrument repair specialists can select this package when planning a complete cello peg replacement. Four same-size components support a coordinated installation when every peg hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and taper before fitting. Existing hole dimensions can vary, so nominal instrument size alone does not establish compatibility across the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting guidance for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four tuning components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs in the 14 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938581189,"sku":"WIT-PGCWM","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwm_fbf283aa-d2f5-4de5-a91a-0ea0f8e116bc.jpg?v=1792003095"},{"product_id":"wittner-pgcws1-finetune-single-cello-peg-125-mm-4-4-3-4","title":"Wittner PGCWS1 Finetune Single Cello Peg, 12.5 mm, 4\/4 - 3\/4","description":"\u003ch2\u003eWittner Finetune Single Cello Peg, 12.5 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Cello Peg in the 12.5 mm option provides geared tuning for the selected 4\/4 - 3\/4 size designation. Its internal reduction mechanism allows controlled pitch adjustments by turning the peg head. Composite and light alloy construction supports a design whose fitted shaft stays stationary in the pegbox during tuning.\u003c\/p\u003e\n\u003cp\u003eCellists and instrument repair specialists can select this individual component when replacing one peg or planning a measured tuning upgrade. For a single cello peg replacement, the diameter at the ring and shaft taper help determine fit. This geared tuning peg for cello suits players seeking finer adjustment at the peg head. Instrument size alone does not establish compatibility; the existing peg holes also require assessment.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for installation. The tapered body fits into a prepared peg hole without glue, while the rotating central section carries the string. A luthier, a specialist who builds and repairs string instruments, can evaluate the pegbox and fit the component. Correct string placement and careful hole preparation support the intended tuning operation.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.5 mm Size Option:\u003c\/strong\u003e Select the specified diameter at the ring for a measured fitting assessment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Reduction Gearing:\u003c\/strong\u003e Make controlled pitch adjustments by turning the peg head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Fitted Shaft:\u003c\/strong\u003e The outer shaft remains fixed in the pegbox while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite and Light Alloy Construction:\u003c\/strong\u003e Use a purpose-built mechanical alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue-Free Fitting:\u003c\/strong\u003e Install the tapered body into a correctly prepared peg hole without adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Designation:\u003c\/strong\u003e 12.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Composite material and light alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal reduction gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitted tapered shaft; no glue required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938613957,"sku":"WIT-PGCWS1","price":73.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcws1_f4107a96-b8c0-49b2-805b-1b8e6e62dfac.jpg?v=1792003101"},{"product_id":"wittner-pgcws412-finetune-cello-pegs-108-mm-1-2-1-4-4-pack","title":"Wittner PGCWS412 Finetune Cello Pegs, 10.8 mm, 1\/2 - 1\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, 10.8 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this 10.8 mm four-pack provide geared pitch adjustment for 1\/2 - 1\/4 cellos. Each peg tunes through its head while the fitted outer shaft stays stationary. The package supplies four components for a replacement installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eCellists, teachers, and repair specialists can select this set when planning a complete fractional cello peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared tuning upgrade for cello, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so the instrument's nominal size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four tuning components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Cello Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 1\/2 - 1\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.8 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts remain fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2 - 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 10.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs in the 10.8 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938646725,"sku":"WIT-PGCWS412","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcws412_a4b52148-6892-4ba0-9ffd-e0eaef7ced37.jpg?v=1792003108"},{"product_id":"wittner-pgcws-finetune-cello-pegs-125-mm-4-4-3-4-4-pack","title":"Wittner PGCWS Finetune Cello Pegs, 12.5 mm, 4\/4 - 3\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, 12.5 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this 12.5 mm four-pack provide geared pitch adjustment for the selected 4\/4 - 3\/4 size designation. Each peg tunes through its head while the fitted outer shaft stays stationary. The package supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this set when planning a complete cello peg replacement. Four same-size components support a coordinated installation when each hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing peg holes can differ, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Wittner recommends replacing one peg at a time during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four tuning components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.5 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts remain fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 12.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs in the 12.5 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938712261,"sku":"WIT-PGCWS","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcws_d83494c6-4a84-4234-8401-92f9613c6f65.jpg?v=1792003115"},{"product_id":"wittner-pgcwsr4-finetune-cello-pegs-small-125-mm-rosewood-color-4-pack","title":"Wittner PGCWSR4 Finetune Cello Pegs, Small 12.5 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Cello Pegs, Small 12.5 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Cello Pegs in this small 12.5 mm four-pack provide geared pitch adjustment with rosewood-colored heads. Each peg tunes through its head while the fitted outer shaft remains stationary. Wittner specifies this diameter for 4\/4 - 7\/8 cellos, with installation dependent on the instrument's measured peg-hole dimensions and taper.\u003c\/p\u003e\n\u003cp\u003eCellists and repair specialists can select this set when planning a complete cello peg replacement with a traditional head color. Four same-size components support a coordinated installation when each hole accepts the specified fit. For a geared cello tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for cello installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated cello peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall 12.5 mm Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:25 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared cello tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Small, 12.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Instrument Size:\u003c\/strong\u003e Cello 4\/4 - 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune cello pegs with rosewood-colored heads in the small 12.5 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698938941637,"sku":"WIT-PGCWSR4","price":245.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgcwsr4_68165738-7b68-4536-bcd1-c8782b69dd69.jpg?v=1792003122"},{"product_id":"wittner-pgfgw-finetune-single-guitar-peg-medium-95-mm-flamenco","title":"Wittner PGFGW Finetune Single Guitar Peg, Medium 9.5 mm, Flamenco","description":"\u003ch2\u003eWittner Finetune Single Guitar Peg, Medium 9.5 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Guitar Peg in the medium 9.5 mm option provides geared tuning for compatible flamenco guitars. Its 8.5:1 reduction mechanism allows controlled pitch adjustment through the peg head. A tapered body fits into a prepared peg hole without glue, while the outer shaft remains stationary during tuning.\u003c\/p\u003e\n\u003cp\u003eFlamenco players and repair specialists can select this individual component when sourcing a replacement geared guitar peg. For a flamenco guitar tuning upgrade, the installation diameter, overall length, and shaft taper help establish fit. The same peg design serves either side of the headstock, simplifying selection for an individual replacement. Correct sizing depends on the existing peg holes and installation position.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures this fitting in Germany using composite material and light alloy. Its installation instructions specify a 1:30 reamer, a cutting tool that prepares tapered peg holes. A luthier, a specialist who builds and repairs string instruments, can assess the fit and string clearance. The string winds onto the rotating central section, with crossed windings recommended for smooth nylon strings.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium 9.5 mm Option:\u003c\/strong\u003e Match the specified installation diameter to the guitar's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.5:1 Reduction Gearing:\u003c\/strong\u003e Make fine pitch adjustments with controlled movement at the peg head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEither-Side Installation:\u003c\/strong\u003e Use the same design on the left or right side of a compatible headstock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlue-Free Fitting:\u003c\/strong\u003e Seat the tapered body in a correctly prepared peg hole without adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite and Light Alloy Construction:\u003c\/strong\u003e Choose a mechanical alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared guitar tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Medium, 9.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Application:\u003c\/strong\u003e Flamenco guitars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Diameter:\u003c\/strong\u003e 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 2.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Ratio:\u003c\/strong\u003e 8.5:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Composite material and light alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Position:\u003c\/strong\u003e Left or right side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Fitted tapered shaft; no glue required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune guitar peg in the medium 9.5 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939007173,"sku":"WIT-PGFGW","price":58.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/wittner-pgfgw.jpg?v=1792008792"},{"product_id":"wittner-pglwl1-finetune-single-viola-peg-92-mm-geared-tuning","title":"Wittner PGLWL1 Finetune Single Viola Peg, 9.2 mm, Geared Tuning","description":"\u003ch2\u003eWittner Finetune Single Viola Peg, 9.2 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Viola Peg in the 9.2 mm size provides geared pitch adjustment through the peg head. Its fitted outer shaft remains stationary while the central string-bearing section rotates. This individual component supports replacement of one tuning peg when its diameter at the ring and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this option when sourcing a single replacement tuning peg or planning an instrument upgrade. For a geared viola peg replacement, the specified diameter and shaft taper help establish fit. Wittner lists this option for all viola sizes, but existing peg-hole measurements still determine installation suitability. A measured assessment supports a viola tuning hardware upgrade tailored to the instrument.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite body seats in a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct positioning lets the moving section carry the string while the surrounding shaft stays fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.2 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 9.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune viola peg in the 9.2 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939072709,"sku":"WIT-PGLWL1","price":63.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwl1_1d7e24c3-ce10-46ae-bb40-082703c2d652.jpg?v=1792003136"},{"product_id":"wittner-pglwl4-finetune-viola-pegs-92-mm-geared-tuning-4-pack","title":"Wittner PGLWL4 Finetune Viola Pegs, 9.2 mm, Geared Tuning, 4-Pack","description":"\u003ch2\u003eWittner Finetune Viola Pegs, 9.2 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Viola Pegs in this 9.2 mm four-pack provide geared pitch adjustment through each peg head. The fitted outer shafts remain stationary while the central string-bearing sections rotate. This set supplies four tuning components for a replacement installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this package when planning a complete viola peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared viola tuning upgrade, assess the diameter and taper before fitting. Wittner lists this option for all viola sizes, but existing hole measurements still determine suitability throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated viola peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.2 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 9.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune viola pegs in the 9.2 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939236549,"sku":"WIT-PGLWL4","price":142.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwl4_d91971ea-aa8f-4549-a38d-3bc934fb48b1.jpg?v=1792003143"},{"product_id":"wittner-pglwl4r-finetune-viola-pegs-large-92-mm-rosewood-color-4-pack","title":"Wittner PGLWL4R Finetune Viola Pegs, Large 9.2 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Viola Pegs, Large 9.2 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Viola Pegs in this large 9.2 mm four-pack provide geared pitch adjustment with rosewood-colored heads. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this package when planning a complete viola peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared viola tuning upgrade, assess the diameter and taper before fitting. Wittner lists this option for all viola sizes, but existing hole measurements still determine suitability throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated viola peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 9.2 mm Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Large, 9.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune viola pegs with rosewood-colored heads in the large 9.2 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939367621,"sku":"WIT-PGLWL4R","price":215.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwl4r_d15b5888-01b9-4870-94c9-d7fce232c4eb.jpg?v=1792003149"},{"product_id":"wittner-pglwm1-finetune-single-viola-peg-86-mm-geared-tuning","title":"Wittner PGLWM1 Finetune Single Viola Peg, 8.6 mm, Geared Tuning","description":"\u003ch2\u003eWittner Finetune Single Viola Peg, 8.6 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Viola Peg in the 8.6 mm size provides geared pitch adjustment through the peg head. Its fitted outer shaft remains stationary while the central string-bearing section rotates. This individual component supports replacement of one tuning peg when its diameter at the ring and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this option when sourcing a single replacement tuning peg or planning an instrument upgrade. For a geared viola peg replacement, the specified diameter and shaft taper help establish fit. Wittner lists this option for all viola sizes, but existing peg-hole measurements still determine installation suitability. A measured assessment supports a viola tuning hardware upgrade tailored to the instrument.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite body seats in a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct positioning lets the moving section carry the string while the surrounding shaft stays fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.6 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune viola peg in the 8.6 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939629765,"sku":"WIT-PGLWM1","price":63.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwm1_547a9033-cb78-4c3b-a92e-ba5227298f4f.jpg?v=1792003156"},{"product_id":"wittner-pglwm4-finetune-viola-pegs-86-mm-geared-tuning-4-pack","title":"Wittner PGLWM4 Finetune Viola Pegs, 8.6 mm, Geared Tuning, 4-Pack","description":"\u003ch2\u003eWittner Finetune Viola Pegs, 8.6 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Viola Pegs in this 8.6 mm four-pack provide geared pitch adjustment through each peg head. The fitted outer shafts remain stationary while the central string-bearing sections rotate. This set supplies four tuning components for a replacement installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this package when planning a complete viola peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared viola tuning upgrade, assess the diameter and taper before fitting. Wittner lists this option for all viola sizes, but existing hole measurements still determine suitability throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated viola peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.6 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune viola pegs in the 8.6 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939695301,"sku":"WIT-PGLWM4","price":142.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwm4_3e65d685-b4eb-46de-864c-37a55f69e1df.jpg?v=1792003163"},{"product_id":"wittner-pglwm4r-finetune-viola-pegs-medium-86-mm-rosewood-color-4-pack","title":"Wittner PGLWM4R Finetune Viola Pegs, Medium 8.6 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Viola Pegs, Medium 8.6 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Viola Pegs in this medium 8.6 mm four-pack provide geared pitch adjustment with rosewood-colored heads. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this package when planning a complete viola peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared viola tuning upgrade, assess the diameter and taper before fitting. Wittner lists this option for all viola sizes, but existing hole measurements still determine suitability throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for string instrument installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated viola peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium 8.6 mm Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared viola tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize Option:\u003c\/strong\u003e Medium, 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Listed Size Compatibility:\u003c\/strong\u003e All viola sizes, subject to correct peg-hole fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune viola pegs with rosewood-colored heads in the medium 8.6 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939793605,"sku":"WIT-PGLWM4R","price":215.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pglwm4r_43949a72-8f33-4d49-8101-a6349c524b08.jpg?v=1792003170"},{"product_id":"wittner-pgsw-finetune-saz-tuning-peg-1-2-size-geared","title":"Wittner PGSW Finetune Saz Tuning Peg, 1\/2 Size, Geared","description":"\u003ch2\u003eWittner Finetune Saz Tuning Peg, 1\/2 Size\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Saz Tuning Peg in the selected 1\/2-size option provides geared pitch adjustment for a compatible saz, also called a baglama. Its composite construction incorporates a rotating string spool within a fitted shaft. Players adjust tuning through the peg head without loosening or tightening the peg's seating in the instrument.\u003c\/p\u003e\n\u003cp\u003eSaz players and instrument repair specialists can select this option when sourcing a replacement geared tuning peg. For a baglama tuning hardware upgrade, assess the existing peg hole and installation position before fitting. The moving spool carries the string during adjustment, while the fitted body remains seated. Correct sizing depends on measured hole dimensions rather than the instrument's nominal size alone.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides installation guidance for saz fittings. A luthier, a specialist who builds and repairs string instruments, can prepare the tapered hole and position the rotating section correctly. The manufacturer's instructions call for individual assessment of each peg hole. Proper string placement keeps the winding on the moving spool and clear of the stationary shaft.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected 1\/2-Size Option:\u003c\/strong\u003e Identify the requested variant when planning a measured fitting assessment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Pitch Adjustment:\u003c\/strong\u003e Tune through the peg head without changing the peg's seating pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaz Application:\u003c\/strong\u003e Use a tuning component developed for the baglama instrument family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Construction:\u003c\/strong\u003e Choose a mechanical alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating String Spool:\u003c\/strong\u003e Wind the string onto the moving section for pitch adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Seating During Tuning:\u003c\/strong\u003e Keep the fitted shaft positioned in the peg hole while tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared saz tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Size Designation:\u003c\/strong\u003e 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Saz \/ baglama\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939826373,"sku":"WIT-PGSW","price":44.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgsw_19b89424-c01d-4346-8cc1-f36539042e6f.jpg?v=1792003177"},{"product_id":"wittner-pgvwm1-finetune-single-violin-peg-86-mm-4-4-3-4","title":"Wittner PGVWM1 Finetune Single Violin Peg, 8.6 mm, 4\/4 - 3\/4","description":"\u003ch2\u003eWittner Finetune Single Violin Peg, 8.6 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Violin Peg in the 8.6 mm size provides geared pitch adjustment for 4\/4 - 3\/4 violins. Turning the head adjusts the string through a rotating central section while the fitted outer shaft stays stationary. This individual component supports replacement when its diameter and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this option when sourcing a single replacement tuning peg or planning an instrument upgrade. For a geared violin peg replacement, the diameter at the ring and shaft taper help establish fit. The individual format suits maintenance of one tuning position. A measured assessment supports a violin tuning hardware upgrade because nominal instrument size alone does not determine existing peg-hole dimensions.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite body seats in a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct positioning allows the moving section to carry the string while the surrounding shaft remains fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.6 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune violin peg in the 8.6 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939859141,"sku":"WIT-PGVWM1","price":46.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvwm1_0f9c54be-9fca-4dc6-be7d-543c3f85ff12.jpg?v=1792003184"},{"product_id":"wittner-pgvwm-finetune-violin-pegs-86-mm-4-4-3-4-4-pack","title":"Wittner PGVWM Finetune Violin Pegs, 8.6 mm, 4\/4 - 3\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 8.6 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 8.6 mm four-pack provide geared pitch adjustment for 4\/4 - 3\/4 violins. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this package when planning a complete violin peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared violin tuning upgrade, assess the diameter and shaft taper before fitting. Existing peg holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.6 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs in the 8.6 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698939924677,"sku":"WIT-PGVWM","price":166.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvwm_36874988-3e8d-4ca7-92cb-05119e19a84d.jpg?v=1792003191"},{"product_id":"wittner-pgvwmr-finetune-violin-pegs-86-mm-rosewood-color-4-pack","title":"Wittner PGVWMR Finetune Violin Pegs, 8.6 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 8.6 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 8.6 mm four-pack provide geared pitch adjustment with rosewood-colored heads for 4\/4 - 3\/4 violins. Each peg tunes through its head while the fitted outer shaft stays stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this package when planning a complete violin peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared violin tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.6 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 8.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs with rosewood-colored heads in the 8.6 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940022981,"sku":"WIT-PGVWMR","price":176.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/wittner-PGVWMR.jpg?v=1792009809"},{"product_id":"wittner-pgvws112-finetune-single-violin-peg-72-mm-1-2-1-4","title":"Wittner PGVWS112 Finetune Single Violin Peg, 7.2 mm, 1\/2 - 1\/4","description":"\u003ch2\u003eWittner Finetune Single Violin Peg, 7.2 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Violin Peg in the 7.2 mm size provides geared pitch adjustment for 1\/2 - 1\/4 violins. Each turn of the head adjusts the string through a rotating central section while the fitted outer shaft stays stationary. This individual component supports replacement when its diameter and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eViolinists, teachers, and repair specialists can select this option when sourcing a single replacement tuning peg for a fractional instrument. For a geared violin peg replacement, the diameter at the ring and shaft taper help establish fit. The individual format suits maintenance of one tuning position. A measured assessment supports a fractional violin tuning upgrade because nominal instrument size alone does not determine existing peg-hole dimensions.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite body seats in a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct positioning allows the moving section to carry the string while the surrounding shaft remains fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Violin Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 1\/2 - 1\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.2 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2 - 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune violin peg in the 7.2 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940055749,"sku":"WIT-PGVWS112","price":46.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvws112_5f8483d1-f0d3-4ea8-9bf1-75795b724c2a.jpg?v=1792003205"},{"product_id":"wittner-pgvws1-finetune-single-violin-peg-78-mm-4-4-3-4","title":"Wittner PGVWS1 Finetune Single Violin Peg, 7.8 mm, 4\/4 - 3\/4","description":"\u003ch2\u003eWittner Finetune Single Violin Peg, 7.8 mm\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Single Violin Peg in the 7.8 mm size provides geared pitch adjustment for 4\/4 - 3\/4 violins. Turning the head adjusts the string through a rotating central section while the fitted outer shaft stays stationary. This individual component supports replacement when its diameter and taper match the instrument's pegbox.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this option when sourcing a single replacement tuning peg or planning an instrument upgrade. For a geared violin peg replacement, the diameter at the ring and shaft taper help establish fit. The individual format suits maintenance of one tuning position. A measured assessment supports a violin tuning hardware upgrade because nominal instrument size alone does not determine existing peg-hole dimensions.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite body seats in a prepared tapered hole, with the string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can assess installation depth and string clearance. Correct positioning allows the moving section to carry the string while the surrounding shaft remains fixed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Peg Format:\u003c\/strong\u003e Replace an individual tuning component without purchasing a complete set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.8 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to the instrument's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shaft:\u003c\/strong\u003e The fitted shaft stays fixed while the central string-bearing section rotates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Body:\u003c\/strong\u003e Use a mechanically geared alternative to a traditional wooden friction peg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg head with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Wittner Finetune violin peg in the 7.8 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940088517,"sku":"WIT-PGVWS1","price":46.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvws1_3b33513f-389f-4ffd-bc20-c5f27e70c48f.jpg?v=1792003212"},{"product_id":"wittner-pgvws412-finetune-violin-pegs-72-mm-1-2-size-4-pack","title":"Wittner PGVWS412 Finetune Violin Pegs, 7.2 mm, 1\/2 Size, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 7.2 mm, 1\/2 Size, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 7.2 mm four-pack provide geared pitch adjustment for a compatible 1\/2-size violin. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists, teachers, and repair specialists can select this package when planning a half-size violin peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared tuning upgrade for violin, assess the diameter and shaft taper before fitting. Existing peg holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Size Violin Application:\u003c\/strong\u003e Select the requested option for a compatible 1\/2-size instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.2 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs in the 7.2 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940121285,"sku":"WIT-PGVWS412","price":166.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvws412_870d5fac-66df-41f9-bede-f5a54b599150.jpg?v=1792003221"},{"product_id":"wittner-pgvws4r12-finetune-violin-pegs-72-mm-rosewood-color-4-pack","title":"Wittner PGVWS4R12 Finetune Violin Pegs, 7.2 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 7.2 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 7.2 mm four-pack provide geared pitch adjustment with rosewood-colored heads for 1\/2 - 1\/4 violins. Each peg tunes through its head while the fitted outer shaft stays stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists, teachers, and repair specialists can select this package when planning a fractional violin peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared violin tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.2 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Violin Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 1\/2 - 1\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2 - 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs with rosewood-colored heads in the 7.2 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940219589,"sku":"WIT-PGVWS4R12","price":155.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/wittner-PGVWS4R12.jpg?v=1792009762"},{"product_id":"wittner-pgvws-finetune-violin-pegs-78-mm-4-4-3-4-4-pack","title":"Wittner PGVWS Finetune Violin Pegs, 7.8 mm, 4\/4 - 3\/4, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 7.8 mm, 4-Pack\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 7.8 mm four-pack provide geared pitch adjustment for 4\/4 - 3\/4 violins. Each peg tunes through its head while the fitted outer shaft remains stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter at the ring and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this package when planning a complete violin peg replacement. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared violin tuning upgrade, assess the diameter and shaft taper before fitting. Existing peg holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.8 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs in the 7.8 mm size option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940317893,"sku":"WIT-PGVWS","price":166.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-pgvws_8d37e427-e866-4322-a23b-eb072cf200eb.jpg?v=1792003237"},{"product_id":"wittner-pgvwsr-finetune-violin-pegs-78-mm-rosewood-color-4-pack","title":"Wittner PGVWSR Finetune Violin Pegs, 7.8 mm, Rosewood Color, 4-Pack","description":"\u003ch2\u003eWittner Finetune Violin Pegs, 7.8 mm, Rosewood Color\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Finetune Violin Pegs in this 7.8 mm four-pack provide geared pitch adjustment with rosewood-colored heads for 4\/4 - 3\/4 violins. Each peg tunes through its head while the fitted outer shaft stays stationary. The set supplies four components for an installation whose peg-hole dimensions match the specified diameter and taper.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this package when planning a complete violin peg replacement with a traditional head color. Four same-size components support a coordinated installation when every hole accepts the specified fit. For a geared violin tuning upgrade, assess the diameter at the ring and shaft taper before fitting. Existing holes can vary, so nominal instrument size alone does not establish compatibility throughout the pegbox.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its Finetune pegs in Germany and provides fitting instructions for violin installations. The composite bodies seat in prepared tapered holes, with each string wound onto the rotating central section. A luthier, a specialist who builds and repairs string instruments, can evaluate installation depth and string clearance. Wittner recommends replacing pegs individually during fitting to maintain more consistent tension on the instrument.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Colored Heads:\u003c\/strong\u003e Add a traditional appearance to a geared tuning installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Peg Package:\u003c\/strong\u003e Obtain four components for a coordinated violin peg replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.8 mm Diameter Option:\u003c\/strong\u003e Match the specified ring diameter to each peg hole's measured fitting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViolin Size Compatibility:\u003c\/strong\u003e Select the manufacturer-listed option for 4\/4 - 3\/4 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeared Tuning:\u003c\/strong\u003e Adjust string pitch through the peg head using the internal mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStationary Outer Shafts:\u003c\/strong\u003e The fitted shafts stay fixed while the central string-bearing sections rotate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Bodies:\u003c\/strong\u003e Use mechanically geared alternatives to traditional wooden friction pegs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:30 Taper:\u003c\/strong\u003e Give the installer a defined specification when assessing peg-hole fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Finetune\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Geared violin tuning pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 pegs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Violin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4 - 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Option:\u003c\/strong\u003e 7.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter at Ring:\u003c\/strong\u003e 0.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper:\u003c\/strong\u003e 1:30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Color:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Control:\u003c\/strong\u003e Rotating peg heads with internal gearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Winding Surface:\u003c\/strong\u003e Rotating central section of each peg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 Wittner Finetune violin pegs with rosewood-colored heads in the 7.8 mm option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940383429,"sku":"WIT-PGVWSR","price":176.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/wittner-PGVWSR.jpg?v=1792009709"},{"product_id":"wittner-srlwt-isny-4-4-viola-shoulder-rest-with-chinrest-clamps","title":"Wittner SRLWT Isny 4\/4 Viola Shoulder Rest With Chinrest Clamps","description":"\u003ch2\u003eWittner Isny 4\/4 Viola Shoulder Rest With Chinrest Clamps\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Isny Viola Shoulder Rest in size 4\/4 provides adjustable shoulder support through a centrally mounted design. Its movable arm and adjustable pad help players configure the playing position, while the support stays clear of the instrument's back. Detachable components make the rest easier to pack between rehearsals, lessons, and performances.\u003c\/p\u003e\n\u003cp\u003eFor violists seeking an adjustable viola shoulder support, the Isny offers flexibility when establishing a comfortable instrument position. Players can change the pad's height, rotation, and tilt to suit their setup. This configurable support suits practice sessions, ensemble rehearsals, and stage use. The removable arm and pad also make it a practical shoulder rest for case transport, retaining the established settings when reassembled.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Isny in Germany and provides assembly guidance for its mounting configurations. This 4\/4 version supports a full-size viola setup, with options for compatible Wittner chinrests or use without a chinrest. Correct installation depends on the instrument and mounting hardware. Wittner recommends installation by an experienced luthier, a specialist who builds and repairs string instruments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Size Fit:\u003c\/strong\u003e Size 4\/4 accommodates a full-size viola setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Playing Position:\u003c\/strong\u003e Configure the shoulder support to suit your instrument hold and preferred posture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMovable Support Pad:\u003c\/strong\u003e Adjust height, rotation, and tilt for a more personalized setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Mounting:\u003c\/strong\u003e Secure the support through a base positioned centrally on the instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Clearance:\u003c\/strong\u003e The support avoids contact with the viola's back plate when correctly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable Components:\u003c\/strong\u003e Remove the arm and pad for convenient storage and transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable Setup:\u003c\/strong\u003e Reattach the components while retaining your previously established playing position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Isny\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Viola shoulder rest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Design:\u003c\/strong\u003e Central mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Pad height, position, rotation, and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport Configuration:\u003c\/strong\u003e Detachable shoulder rest arm and pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940842181,"sku":"WIT-SRLWT","price":155.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-srlwt_7f6def61-c025-44d5-8454-3e2bcabcdb52.jpg?v=1792003257"},{"product_id":"wittner-srvwtb-isny-4-4-violin-shoulder-rest-barrel-chinrest-mount","title":"Wittner SRVWTB Isny 4\/4 Violin Shoulder Rest, Barrel Chinrest Mount","description":"\u003ch2\u003eWittner Isny 4\/4 Violin Shoulder Rest, Barrel Chinrest Mount\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Isny 4\/4 Violin Shoulder Rest in the barrel-mount configuration provides adjustable shoulder support through compatible chinrest hardware. Its movable arm and pad let players configure the support position, while the centrally mounted design keeps the rest clear of the instrument's back. Detachable components simplify storage between practice sessions and performances.\u003c\/p\u003e\n\u003cp\u003eViolinists can select this option when seeking an adjustable shoulder rest for a full-size violin with a compatible barrel-style chinrest. Pad height, rotation, and tilt help establish a preferred playing position. For a personalized violin shoulder support setup, adjust the arm and pad together. The removable components also suit players seeking a shoulder rest for case transport that retains its established settings when reassembled.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Isny in Germany and documents installation through traditional chinrest barrels, the threaded fasteners that secure the chinrest. Correct fit depends on compatible hardware and sufficient clearance around the instrument. Wittner recommends mounting by an experienced luthier, a specialist who builds and repairs string instruments. Check the attachment and locking mechanisms whenever the support is reassembled.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected 4\/4 Size:\u003c\/strong\u003e Focus your setup on the requested full-size violin application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarrel Chinrest Mount:\u003c\/strong\u003e Attach the support through compatible traditional chinrest hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Pad Position:\u003c\/strong\u003e Configure height, rotation, and tilt to suit your playing posture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Mounting:\u003c\/strong\u003e Position the support through a centrally located base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack Clearance:\u003c\/strong\u003e Keep the shoulder support from contacting the instrument's back when correctly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable Arm and Pad:\u003c\/strong\u003e Separate the components for convenient storage and transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable Setup:\u003c\/strong\u003e Reassemble the support while retaining previously established settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Isny\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin shoulder rest\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 4\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Configuration:\u003c\/strong\u003e Compatible barrel-style chinrest attachment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Position:\u003c\/strong\u003e Central mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Pad height, position, rotation, and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport Configuration:\u003c\/strong\u003e Detachable shoulder rest arm and pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup Retention:\u003c\/strong\u003e Established position retained after reassembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698940874949,"sku":"WIT-SRVWTB","price":151.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-srvwtb_529023d0-7f45-47c9-a14c-53b3092ad5a2.jpg?v=1792003264"},{"product_id":"wittner-tpbwp14-ultra-1-4-double-bass-tailpiece-composite","title":"Wittner TPBWP14 Ultra 1\/4 Double Bass Tailpiece, Composite","description":"\u003ch2\u003eWittner Ultra 1\/4 Double Bass Tailpiece\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 1\/4 Double Bass Tailpiece is a composite string anchoring component sized for a quarter-size upright bass. It holds the strings at the lower end of the instrument as part of the tailpiece assembly. Made in Germany, this model provides a size-specific option for replacement or instrument setup.\u003c\/p\u003e\n\u003cp\u003ePlayers, teachers, and instrument repair specialists can select this quarter-size fitting when sourcing a replacement tailpiece for double bass maintenance. Its composite construction offers an alternative to a wooden fitting. For a 1\/4 upright bass setup, matching the tailpiece to the instrument's size provides a starting point when assessing fit. A luthier, a specialist who builds and repairs string instruments, can evaluate the complete installation.\u003c\/p\u003e\n\u003cp\u003eWittner identifies composite material and quarter-size compatibility in its manufacturer documentation. This listing focuses on the tailpiece body for that instrument size. During replacement, assess the attachment hardware, string positioning, and surrounding fittings together. The tailpiece forms part of the instrument's string anchoring system, so its installation belongs within the overall bass setup rather than being treated as an isolated cosmetic change.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuarter-Size Compatibility:\u003c\/strong\u003e Select a fitting intended for a 1\/4 double bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Construction:\u003c\/strong\u003e Choose a composite tailpiece body as an alternative to wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Anchoring Function:\u003c\/strong\u003e Hold the strings at the lower end of the instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Application:\u003c\/strong\u003e Use this size-specific component when servicing an existing bass tailpiece assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Manufacture:\u003c\/strong\u003e Wittner produces this instrument fitting in Germany.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Double bass tailpiece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Compatibility:\u003c\/strong\u003e Double bass \/ upright bass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698957488325,"sku":"WIT-TPBWP14","price":135.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpbwp14_ff05d365-5bcb-4a92-98c1-76a4d80e7946.jpg?v=1792003271"},{"product_id":"wittner-tpfbs-3-4-double-bass-tailpiece-fastener-stainless-steel","title":"Wittner TPFBS 3\/4 Double Bass Tailpiece Fastener, Stainless Steel","description":"\u003ch2\u003eWittner 3\/4 Double Bass Tailpiece Fastener\u003c\/h2\u003e\n\u003cp\u003eThe Wittner 3\/4 Double Bass Tailpiece Fastener is a stainless steel attachment wire for a compatible upright bass tailpiece. It forms part of the connection that anchors the tailpiece to the instrument. This fitting serves the selected three-quarter-size application, with installation dependent on the existing tailpiece and attachment arrangement.\u003c\/p\u003e\n\u003cp\u003eBassists and instrument repair specialists can select this component when replacing an existing tailpiece wire or servicing the lower string anchoring assembly. For a double bass tailpiece repair, assess the fitting dimensions and mounting points together. A stainless steel tailpiece hanger replacement belongs within the complete instrument setup, where attachment length and tailpiece position require careful consideration before restringing.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its tailpiece hangers in Germany and confirms a stainless steel wire suitable for the requested instrument size. Its manufacturer specifications distinguish overall length, cable length, and thread diameter, helping installers evaluate fit. A luthier, a specialist who builds and repairs string instruments, can check the tailpiece attachment and surrounding components. Matching the fastener to the actual installation supports a correctly assembled bass setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Quarter-Size Application:\u003c\/strong\u003e Select a tailpiece attachment fitting for a compatible 3\/4 double bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Wire:\u003c\/strong\u003e Use a metal attachment cable in the tailpiece anchoring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailpiece Connection:\u003c\/strong\u003e Connect the tailpiece to the instrument's lower attachment point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Application:\u003c\/strong\u003e Service an existing tailpiece wire assembly during instrument maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Manufacture:\u003c\/strong\u003e Wittner produces this string instrument fitting in Germany.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tailpiece fastener \/ attachment wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Double bass \/ upright bass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698957717701,"sku":"WIT-TPFBS","price":48.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpfbs_39707eb3-1820-4839-9eec-6e705b365d10.jpg?v=1792003279"},{"product_id":"wittner-tpfwcs14-cello-tailpiece-fastener-stainless-steel-1-4-1-8","title":"Wittner TPFWCS14 Cello Tailpiece Fastener, Stainless Steel, 1\/4 - 1\/8","description":"\u003ch2\u003eWittner Cello Tailpiece Fastener, 1\/4 - 1\/8\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Cello Tailpiece Fastener for 1\/4 - 1\/8 instruments is a stainless steel attachment wire used in the tailpiece anchoring assembly. It connects the tailpiece to the cello's lower attachment point. This size-specific fitting supports replacement or maintenance when its dimensions suit the instrument's existing tailpiece and mounting arrangement.\u003c\/p\u003e\n\u003cp\u003eCellists, teachers, and repair specialists can select this component when servicing a fractional cello's string anchoring system. For a small cello tailpiece repair, assess the attachment wire and surrounding fittings together. A stainless steel tailpiece hanger replacement requires attention to the tailpiece position and available mounting space. The requested size designation helps identify the application, while measured fit determines installation suitability.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its tailpiece hangers in Germany and documents a stainless steel version for quarter-size and eighth-size cellos. The manufacturer distinguishes overall length, cable length, and thread diameter when specifying the fitting. A luthier, a specialist who builds and repairs string instruments, can evaluate the complete attachment assembly. Matching the fastener to the actual installation supports a correctly assembled instrument setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Cello Application:\u003c\/strong\u003e Select an attachment fitting intended for compatible 1\/4 - 1\/8 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Wire:\u003c\/strong\u003e Use a metal cable within the tailpiece anchoring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailpiece Connection:\u003c\/strong\u003e Link the tailpiece to the instrument's lower attachment point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Function:\u003c\/strong\u003e Service an existing attachment wire during cello maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Manufacture:\u003c\/strong\u003e Wittner produces this string instrument fitting in Germany.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tailpiece fastener \/ attachment wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 1\/4 - 1\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698958045381,"sku":"WIT-TPFWCS14","price":78.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpfwcs14_08db8591-d8d5-4838-98da-7f845913b27f.jpg?v=1792003286"},{"product_id":"wittner-tpfwcs34-cello-tailpiece-fastener-stainless-steel-3-4-1-2","title":"Wittner TPFWCS34 Cello Tailpiece Fastener, Stainless Steel, 3\/4 - 1\/2","description":"\u003ch2\u003eWittner Cello Tailpiece Fastener, 3\/4 - 1\/2\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Cello Tailpiece Fastener for 3\/4 - 1\/2 instruments is a stainless steel attachment wire used in the tailpiece anchoring assembly. It connects the tailpiece to the cello's lower attachment point. This size-specific fitting supports replacement or maintenance when its dimensions suit the instrument's existing tailpiece and mounting arrangement.\u003c\/p\u003e\n\u003cp\u003eCellists, teachers, and repair specialists can select this component when servicing a fractional cello's string anchoring system. For a cello tailpiece wire replacement, assess the attachment and surrounding fittings together. A stainless steel tailpiece hanger for cello requires attention to tailpiece position and available mounting space. The requested size designation identifies the application, while measured fit determines installation suitability.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures its tailpiece hangers in Germany and documents a stainless steel version for three-quarter-size and half-size cellos. The manufacturer distinguishes overall length, cable length, and thread diameter when specifying the fitting. A luthier, a specialist who builds and repairs string instruments, can evaluate the complete attachment assembly. Matching the fastener to the actual installation supports a correctly assembled instrument setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFractional Cello Application:\u003c\/strong\u003e Select an attachment fitting intended for compatible 3\/4 - 1\/2 instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Wire:\u003c\/strong\u003e Use a metal cable within the tailpiece anchoring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailpiece Connection:\u003c\/strong\u003e Link the tailpiece to the instrument's lower attachment point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement Function:\u003c\/strong\u003e Service an existing attachment wire during cello maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGerman Manufacture:\u003c\/strong\u003e Wittner produces this string instrument fitting in Germany.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Tailpiece fastener \/ attachment wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument:\u003c\/strong\u003e Cello\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 3\/4 - 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698958307525,"sku":"WIT-TPFWCS34","price":78.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpfwcs34_cc7d626f-1124-49cf-8f7e-3522062da590.jpg?v=1792003293"},{"product_id":"wittner-tplwp1512r-ultra-155-16-viola-tailpiece-rosewood-look-fine-tuners","title":"Wittner TPLWP1512R Ultra 15.5\"-16\" Viola Tailpiece, Rosewood-Look, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 15.5\"-16\" Viola Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra Viola Tailpiece for 15.5-inch and 16-inch instruments combines a rosewood-look plastic composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. A nylon tailgut, the attachment that anchors the tailpiece, connects the assembly to the instrument's lower mounting point.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this fitting when planning a viola tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a viola tailpiece with fine tuners, assess instrument size and the existing mounting arrangement together. This rosewood-look option suits players seeking composite tuning hardware for the specified instrument sizes.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete viola setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Viola Sizes:\u003c\/strong\u003e Choose the requested option for compatible 15.5-inch and 16-inch instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Viola tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Sizes:\u003c\/strong\u003e 15.5-inch and 16-inch violas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698958602437,"sku":"WIT-TPLWP1512R","price":57.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tplwp1512r_8cc2d8f6-384d-4438-bc74-eac6da3923e4.jpg?v=1792003300"},{"product_id":"wittner-tplwp15r-ultra-15-viola-tailpiece-rosewood-look-plastic-fine-tuners","title":"Wittner TPLWP15R Ultra 15\" Viola Tailpiece, Rosewood-Look Plastic, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 15\" Viola Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 15\" Viola Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves the selected 15-inch viola application.\u003c\/p\u003e\n\u003cp\u003eViolists and repair specialists can select this fitting when planning a small viola tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a viola tailpiece with fine tuners, assess the instrument's size and existing mounting arrangement together. This rosewood-look option suits players seeking composite tuning hardware for a 15-inch instrument setup.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete viola setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch Viola Application:\u003c\/strong\u003e Select the requested fitting for a compatible small viola setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Viola tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelected Instrument Size:\u003c\/strong\u003e 15-inch viola\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698958962885,"sku":"WIT-TPLWP15R","price":57.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tplwp15r_9b02d0dd-f60f-4480-9f3d-5021ad1e8c89.jpg?v=1792003308"},{"product_id":"wittner-tpvwp116r-ultra-1-16-violin-tailpiece-rosewood-look-plasticfine-tuners","title":"Wittner TPVWP116R Ultra 1\/16 Violin Tailpiece, Rosewood-Look Plastic,Fine Tuners","description":"\u003ch2\u003eWittner Ultra 1\/16 Violin Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 1\/16 Violin Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves a compatible sixteenth-size violin setup.\u003c\/p\u003e\n\u003cp\u003eTeachers, parents, and repair specialists can select this fitting when planning a small violin tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a fractional violin tailpiece with tuners, assess instrument size and the existing mounting arrangement together. This rosewood-look option suits a 1\/16 violin tuning hardware replacement when the installation dimensions match.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete violin setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteenth-Size Application:\u003c\/strong\u003e Select the requested fitting for a compatible 1\/16 violin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698959290565,"sku":"WIT-TPVWP116R","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwp116r_fcffb905-d56b-4e87-b106-c580575fac19.jpg?v=1792003317"},{"product_id":"wittner-tpvwp12r-ultra-1-2-violin-tailpiece-rosewood-look-plastic-fine-tuners","title":"Wittner TPVWP12R Ultra 1\/2 Violin Tailpiece, Rosewood-Look Plastic, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 1\/2 Violin Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 1\/2 Violin Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves a compatible half-size violin setup.\u003c\/p\u003e\n\u003cp\u003eTeachers, parents, and repair specialists can select this fitting when planning a half-size violin tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a fractional violin tailpiece with tuners, assess instrument size and the existing mounting arrangement together. This rosewood-look option suits a 1\/2 violin tuning hardware replacement when the installation dimensions match.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete violin setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Size Application:\u003c\/strong\u003e Select the requested fitting for a compatible 1\/2 violin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698959651013,"sku":"WIT-TPVWP12R","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwp12r_a7a3301b-ba40-41f9-bfe1-5bf61a11b813.jpg?v=1792003324"},{"product_id":"wittner-tpvwp14r-ultra-1-4-violin-tailpiece-rosewood-look-plastic-fine-tuners","title":"Wittner TPVWP14R Ultra 1\/4 Violin Tailpiece, Rosewood-Look Plastic, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 1\/4 Violin Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 1\/4 Violin Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves a compatible quarter-size violin setup.\u003c\/p\u003e\n\u003cp\u003eTeachers, parents, and repair specialists can select this fitting when planning a small violin tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a fractional violin tailpiece with tuners, assess instrument size and the existing mounting arrangement together. This rosewood-look option suits a 1\/4 violin tuning hardware replacement when the installation dimensions match.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete violin setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuarter-Size Application:\u003c\/strong\u003e Select the requested fitting for a compatible 1\/4 violin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698960044229,"sku":"WIT-TPVWP14R","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwp14r_a23a90e7-decf-4314-a3d2-2adfc1491c50.jpg?v=1792003331"},{"product_id":"wittner-tpvwp18r-ultra-1-8-violin-tailpiece-rosewood-look-plastic-fine-tuners","title":"Wittner TPVWP18R Ultra 1\/8 Violin Tailpiece, Rosewood-Look Plastic, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 1\/8 Violin Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 1\/8 Violin Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves a compatible eighth-size violin setup.\u003c\/p\u003e\n\u003cp\u003eTeachers, parents, and repair specialists can select this fitting when planning a small violin tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a fractional violin tailpiece with tuners, assess instrument size and the existing mounting arrangement together. This rosewood-look option suits a 1\/8 violin tuning hardware replacement when the installation dimensions match.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete violin setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEighth-Size Application:\u003c\/strong\u003e Select the requested fitting for a compatible 1\/8 violin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 1\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698960371909,"sku":"WIT-TPVWP18R","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwp18r_9998cbb4-96ba-4895-af39-91795b286395.jpg?v=1792003338"},{"product_id":"wittner-tpvwp34r-ultra-3-4-violin-tailpiece-rosewood-look-plastic-fine-tuners","title":"Wittner TPVWP34R Ultra 3\/4 Violin Tailpiece, Rosewood-Look Plastic, Fine Tuners","description":"\u003ch2\u003eWittner Ultra 3\/4 Violin Tailpiece, Rosewood-Look Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra 3\/4 Violin Tailpiece in rosewood-look plastic combines a composite body with four integrated fine tuners. Each string has a separate screw control for pitch adjustment. This configuration includes a nylon tailgut, the attachment that anchors the tailpiece, and serves a compatible three-quarter-size violin setup.\u003c\/p\u003e\n\u003cp\u003eViolinists, teachers, and repair specialists can select this fitting when planning a fractional violin tailpiece replacement with a traditional wood-colored appearance. The integrated adjusters provide individual string controls within one assembly. For a violin tailpiece with fine tuners, assess the instrument's size and existing mounting arrangement together. This rosewood-look option suits players seeking composite tuning hardware for a 3\/4 instrument.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures the Ultra in Germany and describes its body as composite rather than solid wood. The rosewood color identifies the appearance, while black adjustment screws provide the tuning controls. A luthier, a specialist who builds and repairs string instruments, can assess tailgut length and tailpiece clearance. Correct installation considers the bridge, attachment position, and surrounding fittings as part of the complete violin setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Quarter-Size Application:\u003c\/strong\u003e Select the requested fitting for a compatible 3\/4 violin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRosewood-Look Plastic:\u003c\/strong\u003e Add a traditional wood-colored appearance with a composite tailpiece body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Integrated Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through a separate screw control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Adjustment Screws:\u003c\/strong\u003e Use individual tuning controls incorporated into the assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Anchor the tailpiece through the manufacturer-specified nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Rosewood-look plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Rosewood-colored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Screw Color:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698960732357,"sku":"WIT-TPVWP34R","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwp34r_ad608e71-92ed-459b-b20b-c2d9a9e4392f.jpg?v=1792003345"},{"product_id":"wittner-tpvwpmt-ultra-multi-system-4-4-violin-tailpiece-black-fine-tuners","title":"Wittner TPVWPMT Ultra Multi-System 4\/4 Violin Tailpiece, Black, Fine Tuners","description":"\u003ch2\u003eWittner Ultra Multi-System 4\/4 Violin Tailpiece, Black Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Wittner Ultra Multi-System 4\/4 Violin Tailpiece in black plastic combines a composite body, four fine tuners, and an adjustable nylon tailgut. The tailgut, the attachment that anchors the tailpiece, allows screw-controlled changes to the bridge-to-tailpiece distance while the violin remains strung. This configuration supports individual string tuning and instrument setup adjustment.\u003c\/p\u003e\n\u003cp\u003eViolinists and repair specialists can select this fitting when planning a full-size violin tailpiece replacement with integrated string adjusters. Each fine tuner provides a separate control for pitch adjustment. For an adjustable violin tailpiece setup, the Multi-System mechanism changes the string afterlength, the section between bridge and tailpiece. Its adjustment travel reaches 0.2 inches, giving installers a defined range for positioning.\u003c\/p\u003e\n\u003cp\u003eWittner manufactures this assembly in Germany and specifies composite construction for the Ultra body. The adjustable attachment uses nylon, while the four string adjusters form part of the tailpiece. A luthier, a specialist who builds and repairs string instruments, can assess mounting clearance and tailpiece position. Correct installation considers the complete violin setup, including the bridge, attachment length, and surrounding fittings.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Size Violin Application:\u003c\/strong\u003e Select the 4\/4 configuration for a compatible instrument setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Plastic Body:\u003c\/strong\u003e Choose the requested black style with manufacturer-described composite construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Fine Tuners:\u003c\/strong\u003e Adjust each string's pitch through an individual tailpiece-mounted control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-System Adjustment:\u003c\/strong\u003e Change the bridge-to-tailpiece distance through a dedicated screw mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment While Strung:\u003c\/strong\u003e Refine the tailpiece position without removing the strings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNylon Tailgut:\u003c\/strong\u003e Connect the tailpiece through an adjustable nylon attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wittner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Ultra Multi-System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Violin tailpiece with fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument Size:\u003c\/strong\u003e 4\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Plastic composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eString Adjusters:\u003c\/strong\u003e 4 integrated fine tuners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgut Configuration:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge-to-Tailpiece Adjustment Travel:\u003c\/strong\u003e Up to 0.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Control:\u003c\/strong\u003e Screw-operated Multi-System mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wittner","offers":[{"title":"Default Title","offer_id":50698961092805,"sku":"WIT-TPVWPMT","price":48.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-wittner-tpvwpmt_667d8dd4-353f-4556-9dcd-d4e857e3eca6.jpg?v=1792003352"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/collections\/wittner-logo_a9006836-64eb-41eb-83d7-0107ec2b5990.jpg?v=1792004125","url":"https:\/\/avlgear.com\/collections\/wittner.oembed","provider":"AVLGEAR","version":"1.0","type":"link"}