{"product_id":"dji-rs-4-pro-combo-2026-3-axis-gimbal-with-sdr-transmission-and-focus-motor","title":"DJI RS 4 Pro Combo (2026) 3-Axis Gimbal with SDR Transmission and Focus Motor","description":"\u003cp\u003eRefreshed for 2026, the DJI RS 4 Pro Combo bundles DJI's flagship 3-axis handheld stabilizer with the DJI SDR Transmission system and a Focus Pro Motor, replacing the Ronin Image Transmitter found in the original combo. The gimbal's carbon fiber axis arms support a 4.5 kg (10 lb) tested payload with a 20% increase in motor torque over the previous generation, accommodating mainstream mirrorless and cinema camera builds with room to spare.\u003c\/p\u003e\u003cp\u003eSecond-generation native vertical shooting lets the horizontal plate be released and locked into the vertical position without extra accessories, and the second-generation automated axis locks reduce gimbal shake when stowed. A joystick mode switch toggles between gimbal movement and lens zoom, so with two Focus Pro Motors fitted an operator can zoom from the joystick and pull focus from the dial. The gimbal is natively compatible with the DJI Focus Pro LiDAR for 76,800-point autofocus within 20 m and with the DJI RS SDK ecosystem.\u003c\/p\u003e\u003cp\u003eThe included DJI SDR Transmission transmitter mounts to the stabilizer and draws power from it, sending 1080p\/60fps video at up to 20 Mbps with latency as low as 35 ms and a range of up to 3 km (FCC) to the included receiver, which outputs to monitors via SDI\/HDMI or to phones and tablets over USB-C and Wi-Fi. The BG30 battery grip runs the gimbal for up to 13 hours and recharges in about 1.5 hours with a 24W PD charger. Rod mount kit, focus gear strip, mounting adapter plates, phone holder, briefcase handle, extended grip\/tripod, and carrying case complete the kit.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3-axis handheld stabilizer with 4.5 kg (10 lb) tested payload and carbon fiber axis arms\u003c\/li\u003e\n\u003cli\u003e20% increase in motor torque for greater power redundancy once balanced\u003c\/li\u003e\n\u003cli\u003e2nd-generation native vertical shooting - switch orientation without additional accessories\u003c\/li\u003e\n\u003cli\u003e2nd-generation automated axis locks with reduced gaps for less shake when locked\u003c\/li\u003e\n\u003cli\u003eJoystick mode switch for gimbal movement or lens zoom; supports dual Focus Pro Motors for focus and zoom\u003c\/li\u003e\n\u003cli\u003eNative compatibility with DJI Focus Pro LiDAR (76,800 ranging points, 20 m) and ActiveTrack Pro\u003c\/li\u003e\n\u003cli\u003eDJI SDR Transmission TX and RX included: 1080p\/60fps up to 20 Mbps, latency as low as 35 ms, range up to 3 km (FCC)\u003c\/li\u003e\n\u003cli\u003eSDR receiver outputs to SDI\/HDMI monitors or USB-C\/Wi-Fi to phones and tablets; TX powered from the gimbal\u003c\/li\u003e\n\u003cli\u003eFocus Pro Motor with rod mount kit and focus gear strip included\u003c\/li\u003e\n\u003cli\u003eBG30 battery grip: up to 13 hours runtime, approx. 1.5 hour charge with 24W PD fast charging; Bluetooth 5.1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGimbal Weight: Approx. 1242 g (2.74 lb)\u003c\/li\u003e\n\u003cli\u003eGrip Weight: Approx. 265 g; Extended Grip\/Tripod (Metal): approx. 226 g; Quick-release plates: approx. 110 g\u003c\/li\u003e\n\u003cli\u003eDimensions (folded): 289.5 x 167.3 x 267 mm (excludes camera, grip, Extended Grip\/Tripod)\u003c\/li\u003e\n\u003cli\u003eDimensions (unfolded): 267.8 x 201.9 x 415 mm (includes grip, excludes camera and Extended Grip\/Tripod)\u003c\/li\u003e\n\u003cli\u003eTested Payload: 4.5 kg (10 lb)\u003c\/li\u003e\n\u003cli\u003ePan: 360-degree continuous rotation; Tilt: -112 to +214 degrees; Roll: -95 to +240 degrees\u003c\/li\u003e\n\u003cli\u003eMax Controlled Rotation Speed: 360 degrees\/s on each axis\u003c\/li\u003e\n\u003cli\u003eBattery (BG30 Grip): LiPo 4S, 1950 mAh, 15.4 V, 30 Wh\u003c\/li\u003e\n\u003cli\u003eMax Runtime: 13 hours (balanced and stationary)\u003c\/li\u003e\n\u003cli\u003eCharging Time: Approx. 1.5 hours with 24W fast charger (QC 2.0 \/ PD recommended)\u003c\/li\u003e\n\u003cli\u003eConnections: Bluetooth 5.1; USB-C charging; Ronin Series accessory\/NATO ports; 1\/4in-20 mounting hole; cold shoe; USB-C ports for video transmission\/LiDAR, RSS camera control, and focus motor\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20 to 45 C (-4 to 113 F)\u003c\/li\u003e\n\u003cli\u003eSDR Transmission: 1080p\/60fps, up to 20 Mbps, H.264; latency as low as 35 ms; range up to 3 km (FCC) \/ 2 km (CE\/SRRC\/MIC)\u003c\/li\u003e\n\u003cli\u003eSDR Transmitter: approx. 145 g, 86.5 x 64 x 32 mm\u003c\/li\u003e\n\u003cli\u003eCombo Packed Weight: approx. 8.36 lb (3.79 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGimbal x 1\u003c\/li\u003e\n\u003cli\u003eBG30 Battery Grip x 1\u003c\/li\u003e\n\u003cli\u003eExtended Grip\/Tripod (Metal) x 1\u003c\/li\u003e\n\u003cli\u003eBriefcase Handle x 1\u003c\/li\u003e\n\u003cli\u003eDJI SDR Transmission Transmitter (TX) x 1\u003c\/li\u003e\n\u003cli\u003eDJI SDR Transmission Receiver (RX) x 1\u003c\/li\u003e\n\u003cli\u003eFocus Pro Motor x 1\u003c\/li\u003e\n\u003cli\u003eQuick-Release Plate (Arca-Swiss\/Manfrotto) x 1\u003c\/li\u003e\n\u003cli\u003eLower Quick-Release Plate (Extended) x 1\u003c\/li\u003e\n\u003cli\u003eLens-Fastening Support (Extended) x 1\u003c\/li\u003e\n\u003cli\u003eMulti-Camera Control Cable (USB-C, 30 cm) x 2\u003c\/li\u003e\n\u003cli\u003eUSB-C Charging Cable (40 cm) x 1\u003c\/li\u003e\n\u003cli\u003eTX Camera Mounting Adapter Plate x 1\u003c\/li\u003e\n\u003cli\u003eTX Gimbal Mounting Adapter Plate x 1\u003c\/li\u003e\n\u003cli\u003eFocus Pro Motor Rod Mount Kit x 1\u003c\/li\u003e\n\u003cli\u003eFocus Gear Strip x 1\u003c\/li\u003e\n\u003cli\u003eFIZ Sticker x 1\u003c\/li\u003e\n\u003cli\u003ePhone Holder x 1\u003c\/li\u003e\n\u003cli\u003eScrew Kit x 1\u003c\/li\u003e\n\u003cli\u003eCarrying Case x 1\u003c\/li\u003e\n\u003cli\u003eDJI Logo Sticker x 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DJI","offers":[{"title":"Default Title","offer_id":50779212284101,"sku":"DJI-CPRN0000046302","price":1637.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1-dji-cp-rn-00000463-02_256b234e-c75b-4885-a298-a4464a7149d3.jpg?v=1792706425","url":"https:\/\/avlgear.com\/products\/dji-rs-4-pro-combo-2026-3-axis-gimbal-with-sdr-transmission-and-focus-motor","provider":"AVLGEAR","version":"1.0","type":"link"}