{"product_id":"doug-fleenor-design-led300-power-supply-for-color-kinetics","title":"Doug Fleenor Design LED300 Power Supply for Color Kinetics","description":"\u003cp\u003e\u003cstrong\u003eDoug Fleenor Design LED300 Power Supply for Color Kinetics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED300 power supply distributes DMX512 data and 24 Volt  power to lighting fixtures and accessories. Primarily designed to power and  control Color Kinetics ColorBlast 12 LED fixtures, the LED300 can also drive  Color Kinetics iColor Cove, Altman Spectra PAR, and similar products, as well  as color scrollers, gobo rotators, and other powered DMX512 controlled  accessories. The LED300 features our DownShifter technology that shifts  incoming DMX512 data and outputs the desired channels as channels 1, 2 and 3.  This allows all fixtures to be set to address \"001\" with the power  supply routing the proper signals to the proper outputs.\u003c\/p\u003e\n\u003cp class=\"specs\"\u003eTechnical Specifications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput power\u003c\/strong\u003e\u003cbr\u003e   115VAC, 50\/60 Hz. 5.5A. Required UL statement: The LED300  must be located near the power outlet powering it and the outlet must be easily  accessible.\u003cbr\u003e   \u003cstrong\u003eInput signal\u003c\/strong\u003e\u003cbr\u003e   DMX512, DMX512\/1990, DMX512-A (250 Kb\/s, 0.2 Volts min. 12  Volts max.)\u003cbr\u003e   \u003cstrong\u003eInput circuit\u003c\/strong\u003e\u003cbr\u003e   Transient protected EIA-485 transceiver (LT1785)\u003cbr\u003e   \u003cstrong\u003eInput protection\u003c\/strong\u003e\u003cbr\u003e   15,000 Volt transient, -60 Volt continuous\u003cbr\u003e   \u003cstrong\u003eInput connector\u003c\/strong\u003e\u003cbr\u003e   Gold plated 5 pin male XLR connector (Neutrik D-1 series)\u003cbr\u003e   \u003cstrong\u003eInput pass through\u003c\/strong\u003e\u003cbr\u003e   Gold plated 5 pin female XLR connector (Neutrik D-1 series)  All five pins are passed through\u003cbr\u003e   \u003cstrong\u003eInput isolation\u003c\/strong\u003e\u003cbr\u003e   600 Volts\u003cbr\u003e   \u003cstrong\u003eOutput signal\u003c\/strong\u003e\u003cbr\u003e   DMX512-A when set for 5V differential data\u003cbr\u003e   DMX512-A timings and protocol with 24V single ended levels  when switched to 24V data\u003cbr\u003e   \u003cstrong\u003eOutput circuit (5V)\u003c\/strong\u003e\u003cbr\u003e   Transient protected EIA-485 transceiver (LT1785) yields an  approximate 3V signal into 120 Ohms\u003cbr\u003e   \u003cstrong\u003eOutput circuit (24V)\u003c\/strong\u003e\u003cbr\u003e   MC34074 high speed op-amp tuned for 4uS bit period (250  Kb\/s) yields approximately 22V at load\u003cbr\u003e   \u003cstrong\u003eOutput connector\u003c\/strong\u003e\u003cbr\u003e   Gold plated 4 pin female XLR (Neutrik D-1 series) rated at  10 amps\u003cbr\u003e   \u003cstrong\u003eOutput current  (power)\u003c\/strong\u003e\u003cbr\u003e   12.5 amps (300 watts) continuous \u003climited to amps watts maximum per output\u003e\u003cbr\u003e   \u003cstrong\u003eIndicators\u003c\/strong\u003e\u003cbr\u003e   Red\/green data type indicator, Red\/green polarity indicator,  Green signal indicator, Three digit DMX Start Address\u003cbr\u003e   \u003cstrong\u003eUser controls\u003c\/strong\u003e\u003cbr\u003e   Three pushbuttons to increment DMX Start Address (hundreds,  tens, and ones)\u003cbr\u003e   \u003cstrong\u003eColor\u003c\/strong\u003e\u003cbr\u003e   Black with white silkscreen nomenclature\u003cbr\u003e   \u003cstrong\u003eSize and weight\u003c\/strong\u003e\u003cbr\u003e   9.25\" h X 5.25\" d X 9.75\" w, 7.5 pounds\u003cbr\u003e   \u003cstrong\u003eMounting options\u003c\/strong\u003e\u003cbr\u003e Two 1\/2\" holes for half couplers or “C” Clamp and  handle slot\u003c\/limited\u003e\u003c\/p\u003e","brand":"Doug Fleenor Design","offers":[{"title":"Default Title","offer_id":42511317500101,"sku":"DFD-LED300","price":2240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/1led300__53450-scaled.jpg?v=1706846396","url":"https:\/\/avlgear.com\/products\/doug-fleenor-design-led300-power-supply-for-color-kinetics","provider":"AVLGEAR","version":"1.0","type":"link"}