{"product_id":"shure-mxa901w-r-hcm-v-white-ceiling-array-mic-drywall-flush-mount-kit","title":"Shure MXA901W-R-HCM-V White Ceiling Array Mic Drywall Flush Mount Kit","description":"\u003cp\u003eThe Shure MXA901-R is a 13.5-inch round ceiling array microphone containing 85 MEMS elements, onboard IntelliMix DSP and Dante audio networking, all fed by one PoE Ethernet cable. Single-Zone Automatic Coverage captures talkers across a 20 x 20 foot room with no aiming or tuning and can be narrowed to 10 x 10 feet, and when a room needs manual control the automatic mode gives way to up to eight steerable pickup lobes placed in Shure Designer.\u003c\/p\u003e\n\u003cp\u003eThis order code is Shure's factory bundle of the \u003cstrong\u003ewhite MXA901W-R\u003c\/strong\u003e array microphone with the \u003cstrong\u003eA901-R-HCM hard ceiling mount kit\u003c\/strong\u003e, the option for installing the array \u003cstrong\u003einto a solid drywall ceiling\u003c\/strong\u003e. Rather than hanging below the ceiling, the microphone sits nearly flush with the surrounding surface: you cut a 13.85-inch (352 mm) hole using the supplied template, drop the mount in, and tighten three screws that swing three support arms up to grip the back of the drywall. The result is the most architecturally discreet way to deploy an MXA901, which is why it is specified for executive boardrooms, courtrooms, training rooms and any finished space where visible hardware is unwelcome.\u003c\/p\u003e\n\u003cp\u003eThe mount's trim is white to match the white MXA901W-R, and it can be painted if the ceiling is a different color. Before ordering, confirm the ceiling is between 0.375 and 1.25 inches thick and that there is at least 2.5 inches of clear space above it. If the ceiling is a suspended tile grid rather than drywall, the A901-R-TB tile bridge kit is the correct accessory instead.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes the A901-R-HCM hard ceiling mount kit for installing the array in a drywall ceiling\u003c\/li\u003e\n  \u003cli\u003eMicrophone sits nearly flush with the surrounding ceiling for the most discreet appearance of any MXA901 mounting option\u003c\/li\u003e\n  \u003cli\u003eThree support arms clamp the mount to the back of the drywall by tightening three screws from below\u003c\/li\u003e\n  \u003cli\u003eMounting template supplied for cutting the ceiling opening accurately\u003c\/li\u003e\n  \u003cli\u003eSeismic tie-off point provided for a safety tether where local regulations require one\u003c\/li\u003e\n  \u003cli\u003eWhite trim matches the white MXA901W-R and can be painted to suit the ceiling\u003c\/li\u003e\n  \u003cli\u003eSingle-Zone Automatic Coverage picks up the whole room with no setup, and adjusts from 10 x 10 ft (3 x 3 m) up to 20 x 20 ft (6.1 x 6.1 m) to match the seating\u003c\/li\u003e\n  \u003cli\u003eSteerable coverage mode places up to 8 independent pickup lobes when automatic coverage is switched off\u003c\/li\u003e\n  \u003cli\u003e85 MEMS microphone elements in a next-generation array for natural, directional speech capture\u003c\/li\u003e\n  \u003cli\u003eOnboard IntelliMix DSP: acoustic echo cancellation, noise reduction, automatic mixing, automatic gain control, compressor, delay and 4-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eDante and AES67 audio networking over a single Cat 5e or better cable, powered by PoE\u003c\/li\u003e\n  \u003cli\u003eCertified for Microsoft Teams and Zoom Rooms, and compatible with leading collaboration platforms\u003c\/li\u003e\n  \u003cli\u003eStandards-based security including 802.1x, secure boot and storage, and AES encryption of control and audio data\u003c\/li\u003e\n  \u003cli\u003eConfigurable LED status bar with adjustable color and brightness, plus command strings for third-party camera and room control integration\u003c\/li\u003e\n  \u003cli\u003eSet up and managed with Shure Designer software or the microphone's embedded web application\u003c\/li\u003e\n  \u003cli\u003eUL2043 plenum rated and IP5X dust protected for air-handling spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: Shure MXA901-R Microflex Advance ceiling array microphone\u003c\/li\u003e\n  \u003cli\u003eMicrophone elements: 85 MEMS\u003c\/li\u003e\n  \u003cli\u003eCoverage area: 20 x 20 ft (6.1 x 6.1 m), single-zone automatic; adjustable down to 10 x 10 ft (3 x 3 m)\u003c\/li\u003e\n  \u003cli\u003eSteerable lobes: up to 8 independent lobes in steerable coverage mode\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 100 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003eSensitivity (at 1 kHz): -4.4 dBFS\/Pa\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL (relative to 0 dBFS overload): 98.4 dB SPL\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio: 67.1 dB A-weighted (ref. 94 dB SPL at 1 kHz)\u003c\/li\u003e\n  \u003cli\u003eSelf noise: 26.9 dB SPL-A\u003c\/li\u003e\n  \u003cli\u003eDynamic range: 71.5 dB\u003c\/li\u003e\n  \u003cli\u003eLatency: 33.5 ms (excluding Dante latency)\u003c\/li\u003e\n  \u003cli\u003eDigital output: Dante or AES67, 2 total channels (1 automix output, 1 AEC reference input)\u003c\/li\u003e\n  \u003cli\u003eSampling rate \/ bit depth: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eAcoustic echo cancellation tail length: up to 250 ms\u003c\/li\u003e\n  \u003cli\u003ePower: Power over Ethernet (PoE) Class 0, 10.1 W maximum\u003c\/li\u003e\n  \u003cli\u003eConnector: RJ45; Cat 5e or higher (shielded cable recommended)\u003c\/li\u003e\n  \u003cli\u003eControl software: Shure Designer or embedded web application\u003c\/li\u003e\n  \u003cli\u003ePlenum rating: UL2043 (suitable for air handling spaces)\u003c\/li\u003e\n  \u003cli\u003eDust protection: IEC 60529 IP5X\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -6.7 C (20 F) to 40 C (104 F)\u003c\/li\u003e\n  \u003cli\u003eMicrophone dimensions: 13.5 in (342.9 mm) diameter x 1.64 in (41.66 mm) high\u003c\/li\u003e\n  \u003cli\u003eMicrophone weight: 5 lb (2.3 kg)\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended mounting height: 12 ft (3.7 m)\u003c\/li\u003e\n  \u003cli\u003eMount supplied: A901-R-HCM hard ceiling mount kit (white trim, paintable)\u003c\/li\u003e\n  \u003cli\u003eCeiling opening required: 13.85 in (352 mm) diameter\u003c\/li\u003e\n  \u003cli\u003eCompatible ceiling thickness: 0.375 to 1.25 in (9.5 to 31.75 mm)\u003c\/li\u003e\n  \u003cli\u003eClearance required above ceiling: minimum 2.5 in (63.5 mm)\u003c\/li\u003e\n  \u003cli\u003eInstallation tools required (not included): drywall saw or other cutting tool, Torx T20 screwdriver, Ethernet cable\u003c\/li\u003e\n  \u003cli\u003eMicrophone finish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eShure MXA901-R Microflex Advance ceiling array microphone (white)\u003c\/li\u003e\n  \u003cli\u003eRPM901-R-Install Kit: network port cover, surface mount, round VESA bracket and 4 M4 screws\u003c\/li\u003e\n  \u003cli\u003eA901-R-HCM hard ceiling mount kit, containing:\u003c\/li\u003e\n  \u003cli\u003e1 x ceiling mount\u003c\/li\u003e\n  \u003cli\u003e1 x round VESA bracket\u003c\/li\u003e\n  \u003cli\u003e4 x M4 screws\u003c\/li\u003e\n  \u003cli\u003e3 x support arms\u003c\/li\u003e\n  \u003cli\u003e3 x M4x40 screws\u003c\/li\u003e\n  \u003cli\u003e1 x mounting template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":46588872818885,"sku":"SHU-MXA901WRHCMV","price":3534.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/838f4ffb386833b9aec846c275dbd247_e947cc0d-260f-463e-b182-ab92c39a9979.jpg?v=1784936115","url":"https:\/\/avlgear.com\/products\/shure-mxa901w-r-hcm-v-white-ceiling-array-mic-drywall-flush-mount-kit","provider":"AVLGEAR","version":"1.0","type":"link"}