{"product_id":"shure-mxa901w-r-pm-1-5-v-white-ceiling-array-mic-1-5-in-pole-mount-kit","title":"Shure MXA901W-R-PM-1.5-V White Ceiling Array Mic 1.5 in Pole Mount Kit","description":"\u003cp\u003eThe Shure MXA901-R delivers conferencing audio from a discreet 13.5-inch round disc only 1.64 inches deep, with 85 MEMS elements, onboard IntelliMix DSP and Dante networking over a single PoE Ethernet cable. Single-Zone Automatic Coverage covers a room up to 20 x 20 feet with nothing to aim or tune, narrows to 10 x 10 feet for smaller rooms, and hands over to up to eight steerable pickup lobes when an integrator wants manual control.\u003c\/p\u003e\n\u003cp\u003eThis order code is Shure's factory bundle of the \u003cstrong\u003ewhite MXA901W-R\u003c\/strong\u003e array microphone with the \u003cstrong\u003eA901W-R-PM-1.5IN pole mount kit in matching white\u003c\/strong\u003e, which hangs the array from a \u003cstrong\u003e1.5-inch diameter threaded NPT pole\u003c\/strong\u003e. Choose the rigid pole over a suspension drop when the microphone must stay exactly where it was commissioned: it cannot swing, drift or rotate out of alignment with the camera or the seating. The VESA bracket threads onto the pole, four thumb screws lock the microphone in place, and a set screw tightened with the supplied M4 hex key fixes the rotation of the LED status bar.\u003c\/p\u003e\n\u003cp\u003eThe white cover and white microphone body suit light-painted open ceilings and architectural spaces where the drop should read as part of the ceiling rather than as equipment. The 1.5-inch NPT pole and its ceiling plate are supplied separately and must include a cable exit; adjustable extension poles with a larger bottom diameter may not fit inside the cover.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes the A901W-R-PM-1.5IN pole mount kit in white for mounting the array on a 1.5-inch threaded NPT pole\u003c\/li\u003e\n  \u003cli\u003eRigid pole mounting holds the microphone at a fixed height and orientation, unlike a suspended drop\u003c\/li\u003e\n  \u003cli\u003eVESA bracket set screw locks rotation so the mute status LED bar faces the direction you choose\u003c\/li\u003e\n  \u003cli\u003eFour thumb screws secure the microphone to the bracket by hand; M4 hex key supplied\u003c\/li\u003e\n  \u003cli\u003eWhite pole mount cover conceals the pole termination and matches the white microphone body\u003c\/li\u003e\n  \u003cli\u003eSingle-Zone Automatic Coverage picks up the whole room with no setup, and adjusts from 10 x 10 ft (3 x 3 m) up to 20 x 20 ft (6.1 x 6.1 m) to match the seating\u003c\/li\u003e\n  \u003cli\u003eSteerable coverage mode places up to 8 independent pickup lobes when automatic coverage is switched off\u003c\/li\u003e\n  \u003cli\u003e85 MEMS microphone elements in a next-generation array for natural, directional speech capture\u003c\/li\u003e\n  \u003cli\u003eOnboard IntelliMix DSP: acoustic echo cancellation, noise reduction, automatic mixing, automatic gain control, compressor, delay and 4-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eDante and AES67 audio networking over a single Cat 5e or better cable, powered by PoE\u003c\/li\u003e\n  \u003cli\u003eCertified for Microsoft Teams and Zoom Rooms, and compatible with leading collaboration platforms\u003c\/li\u003e\n  \u003cli\u003eStandards-based security including 802.1x, secure boot and storage, and AES encryption of control and audio data\u003c\/li\u003e\n  \u003cli\u003eConfigurable LED status bar with adjustable color and brightness, plus command strings for third-party camera and room control integration\u003c\/li\u003e\n  \u003cli\u003eSet up and managed with Shure Designer software or the microphone's embedded web application\u003c\/li\u003e\n  \u003cli\u003eUL2043 plenum rated and IP5X dust protected for air-handling spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: Shure MXA901-R Microflex Advance ceiling array microphone\u003c\/li\u003e\n  \u003cli\u003eMicrophone elements: 85 MEMS\u003c\/li\u003e\n  \u003cli\u003eCoverage area: 20 x 20 ft (6.1 x 6.1 m), single-zone automatic; adjustable down to 10 x 10 ft (3 x 3 m)\u003c\/li\u003e\n  \u003cli\u003eSteerable lobes: up to 8 independent lobes in steerable coverage mode\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 100 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003eSensitivity (at 1 kHz): -4.4 dBFS\/Pa\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL (relative to 0 dBFS overload): 98.4 dB SPL\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio: 67.1 dB A-weighted (ref. 94 dB SPL at 1 kHz)\u003c\/li\u003e\n  \u003cli\u003eSelf noise: 26.9 dB SPL-A\u003c\/li\u003e\n  \u003cli\u003eDynamic range: 71.5 dB\u003c\/li\u003e\n  \u003cli\u003eLatency: 33.5 ms (excluding Dante latency)\u003c\/li\u003e\n  \u003cli\u003eDigital output: Dante or AES67, 2 total channels (1 automix output, 1 AEC reference input)\u003c\/li\u003e\n  \u003cli\u003eSampling rate \/ bit depth: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eAcoustic echo cancellation tail length: up to 250 ms\u003c\/li\u003e\n  \u003cli\u003ePower: Power over Ethernet (PoE) Class 0, 10.1 W maximum\u003c\/li\u003e\n  \u003cli\u003eConnector: RJ45; Cat 5e or higher (shielded cable recommended)\u003c\/li\u003e\n  \u003cli\u003eControl software: Shure Designer or embedded web application\u003c\/li\u003e\n  \u003cli\u003ePlenum rating: UL2043 (suitable for air handling spaces)\u003c\/li\u003e\n  \u003cli\u003eDust protection: IEC 60529 IP5X\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -6.7 C (20 F) to 40 C (104 F)\u003c\/li\u003e\n  \u003cli\u003eMicrophone dimensions: 13.5 in (342.9 mm) diameter x 1.64 in (41.66 mm) high\u003c\/li\u003e\n  \u003cli\u003eMicrophone weight: 5 lb (2.3 kg)\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended mounting height: 12 ft (3.7 m)\u003c\/li\u003e\n  \u003cli\u003eMount supplied: A901W-R-PM-1.5IN pole mount kit, white cover\u003c\/li\u003e\n  \u003cli\u003ePole compatibility: 1.5 in diameter threaded NPT pole (pole not included, must include a cable exit)\u003c\/li\u003e\n  \u003cli\u003eMicrophone attachment: VESA MIS-D, 75 mm square hole spacing, M4 thread (hole depth 9.15 mm)\u003c\/li\u003e\n  \u003cli\u003eMicrophone finish: white\u003c\/li\u003e\n  \u003cli\u003eNote: adjustable extension poles with a larger bottom diameter may not fit the pole mount cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eShure MXA901-R Microflex Advance ceiling array microphone (white)\u003c\/li\u003e\n  \u003cli\u003eRPM901-R-Install Kit: network port cover, surface mount, round VESA bracket and 4 M4 screws\u003c\/li\u003e\n  \u003cli\u003eA901W-R-PM-1.5IN pole mount kit (white), containing:\u003c\/li\u003e\n  \u003cli\u003e1 x pole mount cover (white)\u003c\/li\u003e\n  \u003cli\u003e1 x VESA bracket with set screw\u003c\/li\u003e\n  \u003cli\u003e4 x thumb screws\u003c\/li\u003e\n  \u003cli\u003e1 x M4 hex key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":46588872163525,"sku":"SHU-MXA901WRPM15V","price":3514.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/838f4ffb386833b9aec846c275dbd247_a6feb997-3b93-4754-9e03-db7a14a32eb1.jpg?v=1784936022","url":"https:\/\/avlgear.com\/products\/shure-mxa901w-r-pm-1-5-v-white-ceiling-array-mic-1-5-in-pole-mount-kit","provider":"AVLGEAR","version":"1.0","type":"link"}