{"product_id":"shure-mxa901w-r-pm-3-8-v-white-ceiling-array-mic-3-8-in-rod-mount-kit","title":"Shure MXA901W-R-PM-3\/8-V White Ceiling Array Mic 3\/8 in Rod Mount Kit","description":"\u003cp\u003eThe Shure MXA901-R is a 13.5-inch round ceiling array microphone built around 85 MEMS elements, with IntelliMix DSP and Dante or AES67 networking on board and a maximum draw of 10.1 watts over PoE. Single-Zone Automatic Coverage picks up a 20 x 20 foot room with no setup and can be tightened to 10 x 10 feet, while steerable coverage mode offers up to eight independently placed pickup lobes for rooms that need them.\u003c\/p\u003e\n\u003cp\u003eThis order code is Shure's factory bundle of the \u003cstrong\u003ewhite MXA901W-R\u003c\/strong\u003e array microphone with the \u003cstrong\u003eA901W-R-PM-3\/8IN pole mount kit in matching white\u003c\/strong\u003e, which mounts the array on \u003cstrong\u003e3\/8-inch diameter threaded rod\u003c\/strong\u003e. Threaded rod is the least visually intrusive rigid drop for this microphone and is frequently the fastest install in a plenum that is already hung with rod, because the same stock, anchors and seismic practice already in use overhead carry the array. The kit supplies a 3\/8-inch adapter and jam nut on top of the standard pole mount hardware, plus eight cable ties for dressing the Ethernet cable neatly along the rod.\u003c\/p\u003e\n\u003cp\u003eThe VESA bracket set screw locks rotation, so the mute status LED bar can be aimed at the room during commissioning and stays there. White cover and white microphone body keep the drop quiet under light-toned ceilings. Threaded rod and its ceiling anchor are not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes the A901W-R-PM-3\/8IN pole mount kit in white for mounting the array on 3\/8-inch threaded rod\u003c\/li\u003e\n  \u003cli\u003eThreaded rod gives the slimmest rigid drop for this microphone and suits plenums already hung with rod\u003c\/li\u003e\n  \u003cli\u003e3\/8-inch adapter and jam nut supplied in addition to the standard pole mount hardware\u003c\/li\u003e\n  \u003cli\u003eVESA bracket set screw locks rotation so the mute status LED bar faces the direction you choose\u003c\/li\u003e\n  \u003cli\u003eEight cable ties supplied to dress the Ethernet cable along the rod; M4 hex key included\u003c\/li\u003e\n  \u003cli\u003eWhite threaded rod cover conceals the rod termination and matches the white microphone body\u003c\/li\u003e\n  \u003cli\u003eSingle-Zone Automatic Coverage picks up the whole room with no setup, and adjusts from 10 x 10 ft (3 x 3 m) up to 20 x 20 ft (6.1 x 6.1 m) to match the seating\u003c\/li\u003e\n  \u003cli\u003eSteerable coverage mode places up to 8 independent pickup lobes when automatic coverage is switched off\u003c\/li\u003e\n  \u003cli\u003e85 MEMS microphone elements in a next-generation array for natural, directional speech capture\u003c\/li\u003e\n  \u003cli\u003eOnboard IntelliMix DSP: acoustic echo cancellation, noise reduction, automatic mixing, automatic gain control, compressor, delay and 4-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eDante and AES67 audio networking over a single Cat 5e or better cable, powered by PoE\u003c\/li\u003e\n  \u003cli\u003eCertified for Microsoft Teams and Zoom Rooms, and compatible with leading collaboration platforms\u003c\/li\u003e\n  \u003cli\u003eStandards-based security including 802.1x, secure boot and storage, and AES encryption of control and audio data\u003c\/li\u003e\n  \u003cli\u003eConfigurable LED status bar with adjustable color and brightness, plus command strings for third-party camera and room control integration\u003c\/li\u003e\n  \u003cli\u003eSet up and managed with Shure Designer software or the microphone's embedded web application\u003c\/li\u003e\n  \u003cli\u003eUL2043 plenum rated and IP5X dust protected for air-handling spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: Shure MXA901-R Microflex Advance ceiling array microphone\u003c\/li\u003e\n  \u003cli\u003eMicrophone elements: 85 MEMS\u003c\/li\u003e\n  \u003cli\u003eCoverage area: 20 x 20 ft (6.1 x 6.1 m), single-zone automatic; adjustable down to 10 x 10 ft (3 x 3 m)\u003c\/li\u003e\n  \u003cli\u003eSteerable lobes: up to 8 independent lobes in steerable coverage mode\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 100 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003eSensitivity (at 1 kHz): -4.4 dBFS\/Pa\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL (relative to 0 dBFS overload): 98.4 dB SPL\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio: 67.1 dB A-weighted (ref. 94 dB SPL at 1 kHz)\u003c\/li\u003e\n  \u003cli\u003eSelf noise: 26.9 dB SPL-A\u003c\/li\u003e\n  \u003cli\u003eDynamic range: 71.5 dB\u003c\/li\u003e\n  \u003cli\u003eLatency: 33.5 ms (excluding Dante latency)\u003c\/li\u003e\n  \u003cli\u003eDigital output: Dante or AES67, 2 total channels (1 automix output, 1 AEC reference input)\u003c\/li\u003e\n  \u003cli\u003eSampling rate \/ bit depth: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eAcoustic echo cancellation tail length: up to 250 ms\u003c\/li\u003e\n  \u003cli\u003ePower: Power over Ethernet (PoE) Class 0, 10.1 W maximum\u003c\/li\u003e\n  \u003cli\u003eConnector: RJ45; Cat 5e or higher (shielded cable recommended)\u003c\/li\u003e\n  \u003cli\u003eControl software: Shure Designer or embedded web application\u003c\/li\u003e\n  \u003cli\u003ePlenum rating: UL2043 (suitable for air handling spaces)\u003c\/li\u003e\n  \u003cli\u003eDust protection: IEC 60529 IP5X\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -6.7 C (20 F) to 40 C (104 F)\u003c\/li\u003e\n  \u003cli\u003eMicrophone dimensions: 13.5 in (342.9 mm) diameter x 1.64 in (41.66 mm) high\u003c\/li\u003e\n  \u003cli\u003eMicrophone weight: 5 lb (2.3 kg)\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended mounting height: 12 ft (3.7 m)\u003c\/li\u003e\n  \u003cli\u003eMount supplied: A901W-R-PM-3\/8IN pole mount kit, white cover\u003c\/li\u003e\n  \u003cli\u003eRod compatibility: 3\/8 in diameter threaded rod (rod not included)\u003c\/li\u003e\n  \u003cli\u003eMicrophone attachment: VESA MIS-D, 75 mm square hole spacing, M4 thread (hole depth 9.15 mm)\u003c\/li\u003e\n  \u003cli\u003eMicrophone finish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eShure MXA901-R Microflex Advance ceiling array microphone (white)\u003c\/li\u003e\n  \u003cli\u003eRPM901-R-Install Kit: network port cover, surface mount, round VESA bracket and 4 M4 screws\u003c\/li\u003e\n  \u003cli\u003eA901W-R-PM-3\/8IN pole mount kit (white), containing:\u003c\/li\u003e\n  \u003cli\u003e1 x threaded rod cover (white)\u003c\/li\u003e\n  \u003cli\u003e1 x VESA bracket with set screw\u003c\/li\u003e\n  \u003cli\u003e4 x thumb screws\u003c\/li\u003e\n  \u003cli\u003e1 x M4 hex key\u003c\/li\u003e\n  \u003cli\u003e1 x 3\/8 in adapter\u003c\/li\u003e\n  \u003cli\u003e1 x jam nut\u003c\/li\u003e\n  \u003cli\u003e8 x cable ties\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":46588872491205,"sku":"SHU-MXA901WRPM38V","price":3514.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/838f4ffb386833b9aec846c275dbd247_758cf65b-1caf-4200-9a64-9b421943897d.jpg?v=1784936071","url":"https:\/\/avlgear.com\/products\/shure-mxa901w-r-pm-3-8-v-white-ceiling-array-mic-3-8-in-rod-mount-kit","provider":"AVLGEAR","version":"1.0","type":"link"}