{"product_id":"shure-mxa901w-r-tb-v-white-ceiling-array-mic-ceiling-tile-bridge-kit","title":"Shure MXA901W-R-TB-V White Ceiling Array Mic Ceiling Tile Bridge Kit","description":"\u003cp\u003eThe Shure MXA901-R brings 85 MEMS microphone elements, IntelliMix DSP and Dante networking together in a 13.5-inch round disc only 1.64 inches deep, powered and connected by one PoE Ethernet run. Single-Zone Automatic Coverage handles a room up to 20 x 20 feet with no setup, adjusts down to 10 x 10 feet to keep an adjacent space out of the mix, and can be replaced with up to eight hand-steered pickup lobes when the room calls for it.\u003c\/p\u003e\n\u003cp\u003eThis order code is Shure's factory bundle of the \u003cstrong\u003ewhite MXA901W-R\u003c\/strong\u003e array microphone with the \u003cstrong\u003eA901-R-TB tile bridge kit\u003c\/strong\u003e, the option for installing the array \u003cstrong\u003einto a standard suspended tile grid ceiling\u003c\/strong\u003e. The tile bridge rests on the grid's T-bars above the tile and carries the weight of the microphone off the ceiling tile itself, and the ceiling mount then installs into the bridge so the array finishes nearly flush with the tile. It fits both 24-inch and 60 cm tile grids, and the bridge position is adjustable horizontally and vertically so the microphone can be centred properly in the tile.\u003c\/p\u003e\n\u003cp\u003eThis is the most common architectural install for corporate meeting rooms, training rooms and classrooms, where a flush white disc in a white tile ceiling is far less conspicuous than a suspended or pole-mounted array. The mount's trim is white to match the white MXA901W-R and can be painted. Confirm the tile is between 0.375 and 1.25 inches thick with at least 2.5 inches of clear space above it before ordering; for a solid drywall ceiling, use the A901-R-HCM hard ceiling mount instead.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes the A901-R-TB tile bridge kit for installing the array in a standard suspended tile grid ceiling\u003c\/li\u003e\n  \u003cli\u003eTile bridge rests on the ceiling grid T-bars so the microphone's weight is carried by the grid, not the tile\u003c\/li\u003e\n  \u003cli\u003eFits both 24 in and 60 cm tile grids, with horizontal and vertical adjustment to centre the microphone in the tile\u003c\/li\u003e\n  \u003cli\u003eMicrophone finishes nearly flush with the ceiling tile for a discreet architectural appearance\u003c\/li\u003e\n  \u003cli\u003eSeismic tie-off point provided for a safety tether where local regulations require one\u003c\/li\u003e\n  \u003cli\u003eWhite trim matches the white MXA901W-R and can be painted to suit the ceiling\u003c\/li\u003e\n  \u003cli\u003eSingle-Zone Automatic Coverage picks up the whole room with no setup, and adjusts from 10 x 10 ft (3 x 3 m) up to 20 x 20 ft (6.1 x 6.1 m) to match the seating\u003c\/li\u003e\n  \u003cli\u003eSteerable coverage mode places up to 8 independent pickup lobes when automatic coverage is switched off\u003c\/li\u003e\n  \u003cli\u003e85 MEMS microphone elements in a next-generation array for natural, directional speech capture\u003c\/li\u003e\n  \u003cli\u003eOnboard IntelliMix DSP: acoustic echo cancellation, noise reduction, automatic mixing, automatic gain control, compressor, delay and 4-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eDante and AES67 audio networking over a single Cat 5e or better cable, powered by PoE\u003c\/li\u003e\n  \u003cli\u003eCertified for Microsoft Teams and Zoom Rooms, and compatible with leading collaboration platforms\u003c\/li\u003e\n  \u003cli\u003eStandards-based security including 802.1x, secure boot and storage, and AES encryption of control and audio data\u003c\/li\u003e\n  \u003cli\u003eConfigurable LED status bar with adjustable color and brightness, plus command strings for third-party camera and room control integration\u003c\/li\u003e\n  \u003cli\u003eSet up and managed with Shure Designer software or the microphone's embedded web application\u003c\/li\u003e\n  \u003cli\u003eUL2043 plenum rated and IP5X dust protected for air-handling spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: Shure MXA901-R Microflex Advance ceiling array microphone\u003c\/li\u003e\n  \u003cli\u003eMicrophone elements: 85 MEMS\u003c\/li\u003e\n  \u003cli\u003eCoverage area: 20 x 20 ft (6.1 x 6.1 m), single-zone automatic; adjustable down to 10 x 10 ft (3 x 3 m)\u003c\/li\u003e\n  \u003cli\u003eSteerable lobes: up to 8 independent lobes in steerable coverage mode\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 100 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003eSensitivity (at 1 kHz): -4.4 dBFS\/Pa\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL (relative to 0 dBFS overload): 98.4 dB SPL\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio: 67.1 dB A-weighted (ref. 94 dB SPL at 1 kHz)\u003c\/li\u003e\n  \u003cli\u003eSelf noise: 26.9 dB SPL-A\u003c\/li\u003e\n  \u003cli\u003eDynamic range: 71.5 dB\u003c\/li\u003e\n  \u003cli\u003eLatency: 33.5 ms (excluding Dante latency)\u003c\/li\u003e\n  \u003cli\u003eDigital output: Dante or AES67, 2 total channels (1 automix output, 1 AEC reference input)\u003c\/li\u003e\n  \u003cli\u003eSampling rate \/ bit depth: 48 kHz \/ 24-bit\u003c\/li\u003e\n  \u003cli\u003eAcoustic echo cancellation tail length: up to 250 ms\u003c\/li\u003e\n  \u003cli\u003ePower: Power over Ethernet (PoE) Class 0, 10.1 W maximum\u003c\/li\u003e\n  \u003cli\u003eConnector: RJ45; Cat 5e or higher (shielded cable recommended)\u003c\/li\u003e\n  \u003cli\u003eControl software: Shure Designer or embedded web application\u003c\/li\u003e\n  \u003cli\u003ePlenum rating: UL2043 (suitable for air handling spaces)\u003c\/li\u003e\n  \u003cli\u003eDust protection: IEC 60529 IP5X\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -6.7 C (20 F) to 40 C (104 F)\u003c\/li\u003e\n  \u003cli\u003eMicrophone dimensions: 13.5 in (342.9 mm) diameter x 1.64 in (41.66 mm) high\u003c\/li\u003e\n  \u003cli\u003eMicrophone weight: 5 lb (2.3 kg)\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended mounting height: 12 ft (3.7 m)\u003c\/li\u003e\n  \u003cli\u003eMount supplied: A901-R-TB tile bridge kit (white trim, paintable)\u003c\/li\u003e\n  \u003cli\u003eGrid compatibility: 24 in and 60 cm ceiling tile grids\u003c\/li\u003e\n  \u003cli\u003eTile opening required: 13.85 in (352 mm) diameter\u003c\/li\u003e\n  \u003cli\u003eCompatible tile thickness: 0.375 to 1.25 in (9.5 to 31.75 mm)\u003c\/li\u003e\n  \u003cli\u003eClearance required above ceiling: minimum 2.5 in (63.5 mm)\u003c\/li\u003e\n  \u003cli\u003eInstallation tools required (not included): tile cutting tool, Torx T20 screwdriver, Ethernet cable\u003c\/li\u003e\n  \u003cli\u003eMicrophone finish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eShure MXA901-R Microflex Advance ceiling array microphone (white)\u003c\/li\u003e\n  \u003cli\u003eRPM901-R-Install Kit: network port cover, surface mount, round VESA bracket and 4 M4 screws\u003c\/li\u003e\n  \u003cli\u003eA901-R-TB tile bridge kit, containing:\u003c\/li\u003e\n  \u003cli\u003e1 x tile bridge\u003c\/li\u003e\n  \u003cli\u003e1 x ceiling mount\u003c\/li\u003e\n  \u003cli\u003e1 x round VESA bracket\u003c\/li\u003e\n  \u003cli\u003e4 x M4 screws\u003c\/li\u003e\n  \u003cli\u003e3 x support arms\u003c\/li\u003e\n  \u003cli\u003e3 x M4x40 screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":46588873081029,"sku":"SHU-MXA901WRTBV","price":3559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/838f4ffb386833b9aec846c275dbd247_61a2cbf8-3289-4e53-b50d-3337ba3a9df4.jpg?v=1784936161","url":"https:\/\/avlgear.com\/products\/shure-mxa901w-r-tb-v-white-ceiling-array-mic-ceiling-tile-bridge-kit","provider":"AVLGEAR","version":"1.0","type":"link"}