{"product_id":"toa-m-01m-male-xlr-microphone-preamp-module-for-900-series-amplifiers","title":"TOA M-01M Male XLR Microphone Preamp Module for 900 Series Amplifiers","description":"\u003cp\u003eSome installations need the microphone preamp to present a male XLR rather than a female one - a tie-line panel wired the other way round, a wall plate feeding the rack, a fixed gooseneck assembly with a female cable end, or an existing loom that nobody wants to re-pin. The TOA M-01M answers that requirement. It is the male-connector counterpart to TOA's standard 900 Series mic preamplifier module, delivering the same transformer-balanced 600-ohm front end, the same switchable +22 V phantom supply for condenser capsules, and the same low- and high-cut tone shaping, all terminated on a male XLR (XLR-3-32 equivalent) jack.\u003c\/p\u003e\u003cp\u003eThe M-01M gives the installer more setup range than the female version: input sensitivity is rated at -60 dB for -20 dB output but is adjustable across -72 to -52 dB, with 32 to 52 dB of gain on tap. That headroom makes it straightforward to level-match a hot dynamic handheld and a quiet lavalier on adjacent channels of the same amplifier. Response covers 25 Hz to 20 kHz within 2 dB, distortion stays at or below 0.05 percent at 1 kHz, and input-equivalent noise is specified at -126 dB, so the channel stays clean at high gain.\u003c\/p\u003e\u003cp\u003eLike the rest of the 900 Series module range, the M-01M is powered from the host frame's 24 V DC rail and installs from the front panel. It fits the eight input ports of the A-903MK2, A-906MK2 and A-912MK2 mixer power amplifiers and the M-900MK2 mixer preamplifier, the W-906A and W-912A in-wall mixer power amplifiers, the pair of 900 Series module slots on the 800D Series digital mixer amplifiers A-812D, A-824D and A-848D, and TOA's 9000M2 Series amplifiers, which are specified to accept existing 900 Series input modules. Order the M-01F instead if the channel needs a female XLR jack.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMale XLR microphone input module for TOA 900 Series mixer\/amplifiers\u003c\/li\u003e\n\u003cli\u003eTransformer-isolated 600-ohm balanced input for low-impedance microphones\u003c\/li\u003e\n\u003cli\u003eMale XLR connector (XLR-3-32 equivalent) for tie-lines and looms wired to a female cable end\u003c\/li\u003e\n\u003cli\u003eSelectable +22 V DC phantom power for condenser microphones\u003c\/li\u003e\n\u003cli\u003eHigh-cut and low-cut filters for on-module tone control\u003c\/li\u003e\n\u003cli\u003eAdjustable input sensitivity, -72 to -52 dB, plus 32 - 52 dB gain range\u003c\/li\u003e\n\u003cli\u003eOperates on 24 V DC drawn from the host amplifier frame\u003c\/li\u003e\n\u003cli\u003eCompatible with A-903MK2, A-906MK2, A-912MK2, M-900MK2, W-906A, W-912A, the A-812D \/ A-824D \/ A-848D module slots, and 9000M2 Series amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModule type: Balanced microphone preamplifier input module (900 Series)\u003c\/li\u003e\n\u003cli\u003ePower supply: 24 V DC (supplied from the main frame)\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: 9 mA\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: -60 dB (0 dB = 1 V), rated output -20 dB; adjustable -72 to -52 dB\u003c\/li\u003e\n\u003cli\u003eInput impedance: 600 ohms, balanced, transformer-isolated\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 Hz - 20 kHz, ±2.0 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.05% or less (1 kHz, output 0 dB)\u003c\/li\u003e\n\u003cli\u003eNoise level: -86 dB (20 Hz - 20 kHz BPF); input-equivalent noise -126 dB\u003c\/li\u003e\n\u003cli\u003eGain: 32 - 52 dB\u003c\/li\u003e\n\u003cli\u003eTone control: 100 Hz, 0 to -10 dB; 10 kHz, 0 to -10 dB\u003c\/li\u003e\n\u003cli\u003ePhantom power: +22 V DC (active or disabled, selectable)\u003c\/li\u003e\n\u003cli\u003eConnector: Male XLR (XLR-3-32 equivalent)\u003c\/li\u003e\n\u003cli\u003eModule dimensions: 35 (W) x 78 (H) x 88 (D) mm \/ 1.38\" x 3.07\" x 3.46\"\u003c\/li\u003e\n\u003cli\u003eModule weight: Max. 110 g (0.24 lb)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.2646 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 3.54\" x 3.74\" x 1.57\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x TOA M-01M microphone input module with male XLR connector\u003c\/li\u003e\n\u003cli\u003eNo additional accessories are specified by TOA for this module\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TOA Electronics","offers":[{"title":"Default Title","offer_id":46588276277445,"sku":"TOA-M01M","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0630\/3085\/3829\/files\/M-01M_Angle.jpg?v=1784921303","url":"https:\/\/avlgear.com\/products\/toa-m-01m-male-xlr-microphone-preamp-module-for-900-series-amplifiers","provider":"AVLGEAR","version":"1.0","type":"link"}