Bolin Technology D10H Dante AV RS422 to HDMI Decoder

The Bolin D10H(HDMI) decoder is part of Bolin DanteAV camera systems. Over standard Gigabit network, a single-channel networked AV decoder outputs baseband video HDMI 2.0, which not only works with Bolin DanteAV PTZ camera but also works with standard DanteAV video device within Dante eco system.

It transports up to UHD/4K60 4:4:4 video output with ultra-low latency and lossless quality. It'supports HDCP, plus IP PTZ camera control and embedded audio and RS-RS422/IR control pass-through.

As part of Dante Audio over IP eco family, using standard Gigabit Ethernet network switches and CAT5e UTP wiring, D Series decoder delivers a high-performance virtual video matrix routing solution for presentation of multimedia, and live camera images, Dante 4k video content application such as demanding conference room and classroom applications.

Powered By DanteAV Module
Pair with Bolin D412/D220 DanteAV PTZ camera, Powered by DanteAV module, D Series decoder video output achieves lossless video and extremely low latency with video and audio synchronization. Designed to seamlessly integrate into an existing Dante audio ecosystem, the D Series decoder is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues.

100% Synchronized video and audio
D Series DanteAV decoder integrated Dante's sub-microsecond synchronization to video and audio, a Dante single network clock keeps the camera video in sync regardless of the number of endpoints, making Lip-Sync problem a thing of the past.

HDMI output EDID supported
The D10H provides decoded image to output via HDMI 2.0 which supports EDID. Integrated high-performance scaling engine provides upscaling and downscaling to the encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.

Remote Control & Monitoring
The D Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial Over IP control running Visca protocol. Also has IR over IP to control connected display or other devices.

Key Features

• 4K60 4:4:4 video over standard Gigabit Ethernet
• Ultra-low latency real-time video performance over the network
• 32-bit wide video interface capable of processing code streams 200-800 Mbps
• HDMI 2.0 and/or 12G-SDI output
• Eight audio channels from 44.1 kHz to 192 kHz
• Bit depths: 24, 16 and 32 bits per audio sample
• Tunable audio delay to facilitate lip-sync control
• Dante Audio over IP, AES67 RTP audio transport format
• Support unicast and multicast for 8 audio flow and 1 video flow
• Full support of Dante audio and video protocols
• Supported by Dante Controller
• Instant compatibility with over 2000 existing Dante-enabled audio products
• Fully time-aligned and separately routable audio and video streams

Technical Specifications

Decoding
Video Codec
Optimized implementation of JPEG2000 codec in FPGA, Licensed by IntoPIX
Video Resolutions
Up to 4096x2160@60Hz; RGB 4:4:4 @ 8-bit YCbCr 4:4:4 @ 8-bit YCbCr 4:2:2 @ 8/10/12 bit
Color Depth
8-bit, 10-bit, 12-bit
Audio Formats
Dante Audio over IP
Bit Rates
200 to 800 Mbps
Copy Protection
HDCP 2.2, HDCP 2.3 for network,
Latency
0.5 frame (e.g., 2160p @ 60 Hz latency is < 8 ms between encoder and decoder), Note: Overall latency may increase depending on network configurations
Dante Ecosystem Friendly
Instant Dante Ecosystem compatibility with existing Dante-enabled products; Unified control of audio and video using Dante tools - Dante Controller
HDMI Output
Format
HDMI 2.0: HDCP 2.2, EDID
Supported resolutions
4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
Frame rates (Hz)
23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Color space
RGB, YCbCr
Component bit width
8-bit, 10-bit, 12-bit
Color sub-sampling
4:4:4, 4:2:2, 4:2:0
EDID
YES, Only with D10H
Audio
Audio transport formats
Up to eight channels at 44.1, 48, 88.2 or 96kHz. HDCP sourced audio channels limited to 48kHz. HDMI 7.1 embedded audio.
Bit depths
24, 16 and 32 bits per audio sample
Embedded audio over HDMI output
2 channels from DANTE
Output sample rate
48K and 96K, PCM24(24, 16 and 32 bits)
Connections
Ethernet 1 POE
IEEE 802.3ab compliant 1000BASE-T Ethernet port, IEEE 802.3bt Type 3 compliant, PoE++ Class 4 (60W)
Ethernet 2
IEEE 802.3ab compliant 1000BASE-T Ethernet port
HDMI Output
HDMI Type A connector, female; HDMI digital video/audio output
SDI Output (D20S)
BNC, 75O,
USB 1, USB 2
USB Type-A connector, female; USB 2.0 host port; USB signal extender port for connection to a mouse, keyboard; Available Power: 500 mA at 5 VDC.
USB OTG (On the Go)
Host computer Mouse (Dante AV transmitter)
Serial Control
RJ45, RS-422 compatible with Visca control PTZ camera
IR TX, IR RX
2-pin 3.5 mm, Carrier frequency:38 kHz; Supply voltage: 3.3V to 5V.
LED Indicator
Power, Codec, System, Error, Sync, HDCP
Network Interface
Standard 1Gbps Ethernet
Audio Channels x8, Flow x15 (unicast or multicast)
Video Flow x1 (unicast or multicast)
Hardware time-stamping, supporting sample-accurate playback
General
Power Consumption
Power input @ 4K60: 38W (D20S); 25W (D10H)
PoE (D10H)
PoE+, IEEE 802.3at Type 3 class 5 compliant
PoE (D20S)
PoE++, IEEE 802.3bt Type 3 class 5 compliant
Power Adaptor
Input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz, Output: 4A @ 12 VDC. 12V DC IN has priority over Ethernet 1 POE. Ethernet 1 POE will become active a fraction of a second after 12V DC IN is disconnected.
Storage Temperature
-40 to 100 Degrees C
Operating Temperature
32 Degrees to 104 Degrees F
Humidity
10% to 90% (non-condensing)
Heat Dissipation
Cooling fan speed adjustable, 3 Level
Acoustic Noise
NC35 or less, variable with cooling fan speed adjustment
Regulatory compliance
CE, IC, FCC Part 15 Class B digital device
Body Color
Metallic Black
Mounting (Included)
HDMI cable secure mount, surface mount for TV display, base mount.
Mounting (Optional)
19-inch single rack mount, 19-inch dual rack mount, Din rail mount
Dimension
216.5x148.35x44mm (LxWxH)
Weight
2.5 lb (Net weight)
Item Includes
1x Dante AV Decoder
1x Power Adaptor
3x Power Cord
1x RJ45 to RS422 Control Cable
1x Desktop Mounting Kit
1x VESA and Velcro Mount Kit
8x M2 Screws
2x M3 Screws
4x M4 Screws
4x M5 Screws
1x Mini Pole Bracket
4x Cable Ties
1x HDMI Cable Mount