Bolin Technology KBD-1010-RNV RS232/RS422 and IP PTZ Camera Controller/Keyboard

The ergonomically designed Bolin KBD-1010-RNV controller has a direct-access panel interface with full preset store and recall for easy-to-find camera functions, dedicated knobs for PTZ variable speed control and for fine control with auto/manual toggle, illuminated push buttons for camera selection and a three-axis joystick for smooth precise camera movements.

Combining traditional serial control and IP network control, KBD-1010 PTZ camera controller comes equipped with many precision controls for the most demanding camera operation environments. It is an ideal partner for multi-PTZ-camera producer, creating a baseband video and a complete IP streaming solution for a wide range of content production applications, remote studio, education, state-of-the-art broadcast system, video conferencing, house of worship, etc.

Quick Access Control
Delicate knobs for Quick Access features include the control of Exposure, Shutter Speed, Iris, Compensation, White Balance, Focus, PT Speed, Zoom Speed.

Image Parameter Control
Via Visca protocol, either serial Visca or Visca Over IP, the KBD-1010 has image color and exposure related settings - including black levels, white balance, auto/manual exposure level, iris, gain and shutter speed - can be adjusted directly without using the camera menus. Quick, Simple, Direct IP PTZ Camera Assignment and Use IP control, without using PC, automatically search available IP cameras in the network. Assign IP addresses and IP camera registration easily.

Selectable ASSIGN Items
ASSIGN item is selectable, additional functions can be assigned to ASSIGN keys to have One-Key quick action of the camera's Flicker, Status Display, AE level, SRZ, Tele Convert mode, Trace Memory, ND filter, Picture Profile settings, Rain wiper on/Off, Camera Power etc. Functionalities can be assigned. Available function depends on camera specification.

Key Features

• Cross Protocol Mix-control with RS232/RS422 and IP in one single system.
• Protocol support: Visca, Visca-Over-IP, Pelco D/P, Onvif IP
• Multiple controllers control up to total 255 IP/VISCA/PELCO cameras on a single system.
• Supports any brand of Visca Over IP cameras in a same system.
• 3-Way simultaneous joystick control.
• Supports video router camera switching with PTZ camera control
• Power:12VDC, Independent power over control, POE.
• Wide range power voltage tolerance: 5V - 48V, provides longer distance power run and suitable for vehicle use.

Technical Specifications

Inputs/Outputs
Control Input/Output
RS232: RJ45 x1 RS422: RJ45 x2; LAN: RJ-45 x 1, 10BASE-T/100BASE-TX automatically detected. Tally In/Contact Out*
9pin x1; USB2.0*: Type A x1 (For Firmware Upgrade Only)
Control Signal Format
Baud Rate: 2400/4800/9600/19200/38400 (For RS232 - RS422) VISCA over IP communication
Power Connector
JEITA type 4 (12VDC), RJ45x1 for POE (IEEE 802.3af), RJ45x3 for Power Over Control
Firmware Upgrade
USB2.0: Type A x1, for FW Upgrade Only
Interface
Display
LED
Speed Control
2 Knobs (Pan/Tilt, Zoom)
Zoom Seesaw Lever
Yes
Zoom Ring of Joystick
Yes
ASSIGN Button
6
3-Way Simultaneously Control
Pan+ Tilt+ Zoom
Camera Control
Maximum Camera Control
Allow to control up to total 255 cameras with combining multiple protocols use in a single system.
Maximum IP Connections
Onvif Only: 255; CGI: TBD, Onvif/VISCA Over IP Only: 255
Maximum Serial Connections
RS232: 7(VISCA), RS422: 2x7 (VISCA), RS485:255(Pelco P/D)
Control Protocol
Pelco P/D over RS485, Visca over RS232/RS422, Onvif, VISCA over IP
Max Controller Qty/System
Unlimited
Key/Button Illumination
multi-color LED indicators
Third-Party Device Support
Black Magic SDI router/switch, Control type: RS422, Control Method: Camera switching with PTZ control
Configuration File
File of PTZ camera configuration and keyboard setting Export/Import via IP
Buttons/Knobs
Exposure Model Selection
Button + Knob, Full Auto, Iris Priority, Shutter Priority, Manual Iris Gain, Manual Shutter Gain, Black Level.
OPW Auto Adjustment
Button
BLC
Button
Display the Status of WB, Iris, Gain, Shutter, Focus
Yes
WB Model Selection
Button
R, B Gain Adjustment
Knob
Iris Value Adjustment
Knob
Shutter Speed Adjustment
Knob
Focus Model Selection
Button
One-Push Auto Focus
Button
Manual Focus
Knob
General
Power/Input & Voltage
Independent power input 12VDC voltage tolerance 5V~48V, POE(IP), Power using RS422/232 port via Junction Box included.
Current Consumption
5W
Operation Temperature
32 Degrees F to 104 Degrees F
Storage Temperature
4 Degrees F to 140 Degrees F
Dimensions
278 mm x 132 mm x 99.5 mm (Without Base Bracket)
Weight
1kg
Supplied accessories
Power Adapter and power core (110VAC~220VAC to 12VDC/2A) x1, Junction Box and Control Cable x 1, Magnetic Base Bracket x1, Tally Phoenix connectorX1
Optional accessories
RJ45 Adapter for RS232 + RJ45 Coupler, RJ45 Adapter for RS422 + RJ45 Coupler
Notes
Available functions/specifications depend on camera specification
Notes
Functions may differ based on different version of the firmware.
Notes
* USB2.0 for firmware upgrade only.
Item Includes
1x Keyboard/Controller
1x Power Supply & Cord
1x RJ-45 to Phoenix Breakout
1x RJ-45 Coupler
1x Junction Box
1x Tally Light Terminal Contact
1x Key Assign Label Sheet
1x Manual