Shure QLXD124/83-G50 Wireless Bodypack and Handheld Vocal Combo System with WL183

The QLXD124/83 Handheld and Lavalier Combo Wireless Microphone System is part of the QLX-D wireless systems family. QLX-D delivers outstanding wireless functionality ideal for mid-size events and installations in businesses, hotels, and government offices with conferencing spaces; schools, houses of worship, and live performance spaces.

Note: Bodypack and handheld transmitters cannot be used simultaneously.

WL183 (Omnidirectional): Recommended for general purpose sound reinforcement, recording, or remote monitoring applications. Low handling noise. Pickup angle: 360 degrees. Models WL183, WL184 and WL185 are lavalier electret condenser mics designed for use with a wireless body-pack transmitter. Each mic has a 1.2-meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90-degree intervals for placement flexibility. All models feature CommShield Technology, which guards against interference from cellular RF devices and digital bodypack transmitters.

Technical Specifications

Type
Condenser (electret bias)
Frequency Response
50 to 17,000 Hz
Impedance
1800 ohms
Output Level
WL183: -40.0 dBV/Pa
Includes
QLXD2/SM58, WL183, QLXD1, QLXD4, microphone clip, 2 zipper bags, 4 AA batteries, power supply, two 1/2 wave antennas, 2 BNC cables, 2 BNC bulkhead adapters, rackmount kit, and user guide

Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime @ 10 mW
Shure SB900: up to 10 hours
Alkaline: up to 9 hours
Dimensions
86 mm x 65 mm x 23 mm (3.38 in. x 2.57in. x 0.92 in.) H x W x D
Weight
138 g (4.9 oz.), without batteries
Housing
Cast aluminum
Audio Input Connector
4-pin male mini connector (TA4M)
Configuration
Unbalanced
Impedance
1 M ohm
Maximum Input Level
1 kHz at 1% THD
8.5 dBV (7.5 Vpp)
Preamplifier Equivalent Input Noise (EIN) System Gain Setting >= +20
120 dBV, A-weighted, typical-
RF Output Connector
SMA
Antenna Type
1/4 wave
Impedance
50 ohms
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW

Dimensions
41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D
Weight
777 g (1.71 lbs), without antennas
Housing
Steel
Power Requirements
12 V DC @ 0.4 A, supplied by external power supply (tip positive)
RF Input
Spurious Rejection
>80 dB, typical
Connector Type
BNC
Impedance
50 ohms
Audio Output
Gain Adjustment Range
-18 to +42 dB in 1 dB steps
Configuration
1/4 inch (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance
1/4 inch (6.35 mm): 100 OHM (50 OHM Unbalanced)
XLR: 100 OHM
Full Scale Output
1/4 inch (6.35 mm): +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Mic/Line Switch
30 dB pad
Phantom Power Protection
1/4 inch (6.35 mm): Yes
XLR: Yes
Networking
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Ethernet Cable Length
100 m (328 ft)