KanexPro VGAEXTX1 VGA 1x1 Extender over CAT5e/6

The KanexPro VGA extender over a single CAT5e/6 cable is designed for routing high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances.
The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTV’s to projectors. In addition, each output performs a separate buffering to maintain signal integrity and reject noise interference.

Key Features

• Extend high-resolution VGA signal with audio over a single Cat5E/6 cable up to 1,000 feet (300m)
• Adjust GAIN and PEAK levels to adapt for variable lengths of UTP cable on the receiver
• Supports maximum resolutions up to WUXGA (1920x1200@60Hz)
• Stereo Audio Input through 3.5mm jack
• CAT5e/6 Output via RJ-45 Jack
• Transmitter includes Local VGA Monitor Output w/ 3.5mm jack
• EDID Compliant
• Rack or under-desk mountable
• 5VDC external power supply included

Technical Specifications

Interface:
Transmitter (1)
Input: VGA x1/3.5mm Stereo x1
Output: Cat 5e/6 x1/VGA Output (Local) x1/3.5mm Stereo x1
Receiver (1)
Input: Cat 5e/6 x1
Output: VGA x1/3.5mm Stereo x1
Vertical Frequency Range: 60/75/85Hz
Resolutions (PC): VGA-WUXGA (1920x1200@60Hz)
Power Supply: 5V DC@2A, 5W
Operating Temperature: 0°C to +70°C
Operating Humidity: 10% to 85 % RH (no condensation)
Storage Temperature: -10°C to +80°C
Storage Humidity: 5% to 90 % RH (no condensation)
Dimensions:
VGA Extender: 4”x2.6”x1” (102x66x25.5mm)
Receiver: 3.25”x1.4”x0.8” (82.6x35.6x20mm)
Total Weight:
VGA Extender: 0.47lbs (215g)
Receiver: 0.25lbs (115g)