Martin DMX PowerPort 375 Indoor Power and Data Unit for Creative LEDs

The DMX PowerPort 375’s versatile housing supports single- and dual-unit mounting in 19” racks, wall-mounting and truss-mounted hanging configurations. The robust connectors and built-in DMX/RDM compatible splitter facilitate easy daisy-chaining between units, while the local test-button provides quick system-check without running back to the console.

Key Features

• Rack-, truss- and wall-mountable
• Compact design
• DMX/RDM IN and THRU
• Built-in DMX/RDM splitter
• Hybrid power/data output port
• Local test button

Technical Specifications

Physical
Width
220mm (single or double unit 19” rack-mountable with included rackmount ears)
Height
44mm (rack mount 1U)
Depth
289mm
Weight
2.33 kg
Control and Programming
Control Protocols
DMX and RDM
DMX compliance
USITT DMX512-A
RDM compliance
ANSI/ESTA E1.20
DMX/RDM Transceiver IN/THRU
Opto-Isolated RS-485
DMX/RDM Transceiver OUT
Opto-Isolated RS-485
Setting and Addressing of connected fixtures
RDM
Firmware update
over DMX link using Martin Companion
Control/User Interface
Power output status
Green LED
Data Activity Status
Yellow LED
Fixture Test
Pushbutton to call up test pattern
Construction
Housing
Steel
Color
Matte Black
Protection rating
IP 20
RoHS
Compliant
REACH
Compliant
Installation
Orientation
Any
Single Unit 19-inch Rackmount
Using supplied short and long rack mounting ears
Dual Unit 19-inch Rackmount
Using supplied coupling plates and short rack mounting ears
Wallmount
Using supplied short rack mounting ears
Trussmount Vertical
Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
Trussmount Horizontal
Using halfcouplers in supplied short rack mounting ears
Connections
AC mains power IN
Neutrik powerCON TRUE1
AC mains power THRU
Neutrik powerCON TRUE1
DMX/RDM IN
Neutrik 5-pin male XLR socket
DMX/RDM THRU
Neutrik 5-pin female XLR socket
Combined power & data out
Neutrik 4-pin female XLR socket
All connections hot-plugging compatible
Electrical
AC mains power input
100-240 V (nominal), 50/60Hz
Power supply unit
Auto-ranging electronic switch mode
Maximum permitted total current draw from 48Vdc OUT at 100-120 V mains power: 5.0 A
Maximum permitted total current draw from 48Vdc OUT at 173-240 V mains power: 7.5 A
Mains fuses
Double-pole/neutral fusing, 2x T6.3 A (slow-blow), 250 VAC
Maximum total power consumption
450 W (including full load of connected fixtures)
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 9.6 A
Typical earth-leakage current
1.7 mA
Thermal
Cooling
Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.)
45 °C
Minimum ambient temperature (Ta min.)
-20 °C
Typical heat dissipation (calculated, +/- 10%)
300 BTU/hr. (not including connected fixtures, but with system at full load)
Approvals
EU safety
IEC/EN60950, IEC/EN62368-1
EU EMC
EN55032,EN55035, EN 61000-3-2, EN 61000-3-3
Australia/NZ
AS/NZS 62368.1:2018
Canadian / US Safety
CAN/CSA-C22.2 No. 62368-1/UL 62368-1
Canadian / US EMC
ICES-003,Class B / FCC 47 CRF § 15 Class B
Included Items
1 x Safety Cable Attachment Eyelet, incl. screws
2 x Short Rack Mounting Ears, incl. screws
1 x Long Rack Mounting Ear, incl. screws
1 x Coupling Plate, incl. screws
Please note that a power input cable is not supplied with the product and must be ordered separately
Supported Fixtures*
Martin VDO Sceptron Family
Martin VDO Fatron Family
Martin VDO Dotron Family
Martin Exterior PixLine Family
Martin Exterior Dot-HP Family
Martin VC-Grid Family
Martin VC-Strip Family
Martin VC-Dot Family (via Martin VC-Feeder)
Quantity of fixtures per DMX PowerPort 375 listed in Capacity