Electro-Voice TX1122FM 12-Inch Two-Way Full-Range Floor Monitor
Electro-Voice TX1122FM 12-Inch Two-Way Full-Range Floor Monitor
Free Shipping
Electro-Voice TX1122FM 12-Inch Two-Way Full-Range Floor Monitor
The Electro-Voice TX1122FM 12-Inch Two-Way Full-Range Floor Monitor is a compact, high output dedicated floor monitor for use on small to medium-sized stages where high quality vocal and instrument applications are required in a lightweight package.
The TX1122FM enclosure utilizes Signal Synchronized Transducers (patent pending), a design that aligns the woofer and compression driver by locating them on separate baffles, and integrates a low distortion port between the baffles. This offers tremendous advantages over traditional flat baffle construction: the acoustic centers of the woofer and compression driver are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint.
The TX1122FM utilizes the DH3, a high output 1.25” titanium compression driver, coupled to a Constant Directivity™ 90° x 50° horn. The SMX2121 12” woofer has an FEA optimized magnet structure and shorting ring for ultra low distortion. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and has a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover result in a compact floor monitor that is capable of very high output levels levels before feedback.
The TX1122FM has a variety of features that make it well suited as a dedicated floor monitor. The internally braced enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoatTM for maximum strength and durability. The unique grille design is very strong and dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1122FM in a variety of positions. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, which keeps the connectors hidden and away from the performers on stage.
Key Features
- 55 Degrees Compact Vertical Floor Monitor with Signal Synchronized Transducers
- 99dB Sensitivity, 132dB Maximum SPL
- DH3 1.25” (32mm) Diaphragm, 1” (25mm) Exit Pure Titanium Compression Driver
- SMX2121 12” (305mm) LF Transducer with Fully Symmtric Drive
- Integrated Crossover with Steep 24dB / Octave Slopes and HF Protection
- 90 Degrees x 50 Degrees Coverage Pattern
- 500W Continuous (2000W Peak) Power Handling
Technical Specs
Frequency Response (-3dB)
70Hz – 20kHz
Frequency Range (-10dB)
55Hz – 20kHz
Rec. Hipass Frequency
60Hz
Axial Sensitivity
99dB (1W/1m)
Max. Calculated SPL
132dB
Horizontal Coverage
90 Degrees
Vertical Coverage
50 Degrees
Power Handling
500W Continuous, 2000W Peak
LF Transducer
SMX2121, 12-in (305mm) Driver
HF Transducer
DM3, 1.25-in. (32mm) Diaphragm Compression Driver
Crossover Frequency
1600Hz
Nominal Impedance
8Ohms
Minimum Impedance
6.4Ohms
Connectors
2 x Neutrik Speakon NL4’s
Enclosure Material
Plywood and MDF with EVCoat
Grille
16GA Steel, Black Powdercoat, with Rotatable Logo
Dimensions (H x W x D)
17.3” x 14.3” x 22.6” (440mm x 364mm x 573mm)
Weight
43.7 lbs. (19.8kg)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
