Transition Networks SGETF1013-110 1000Base-T Gigabit Ethernet to Fiber Media Converter, SC MM Duplex
Transition Networks SGETF1013-110 1000Base-T Gigabit Ethernet to Fiber Media Converter, SC MM Duplex
Migrate to Gigabit Ethernet in a cost-effective manner. Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of the higher costs. Transition Networks 1000BASE-T to SX/LX converters allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 125 km). 1000Base-T (RJ-45) <100 m/328 ft.> to 1000Base-SX 850nm multimode SC Duplex (62.5/125µm fiber OM1: 220 m/722 ft.)
Key Features
- Auto-Negotiation (802.3u) (Copper & Fiber)
- Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link
- Transparent Link Pass Through
- Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port-thus notifying the end device-while maintaining the fiber link between the two converters
- Automatic Link Restoration
- Transition Networks's converters will automatically re-establish link in all network conditions.
- Pause (IEEE 802.3xy)
- Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Remote Fault Detect
- Enable Remote Fault Detect on the remote device
- Local end-device will be notified of remote fiber RX loss
Technical Specifications
Standards IEEE Std. 802.3ab and IEEE Std. 802.3z
Fiber Optic Connector Specs
Multimode Min TX PWR
-10.0 dBm
Max TX PWR
-4.0 dBm
RX Sensitivity
-17.0 dBm
Max In PWR
0.0 dBm
Link Budget
7.00 dB
6-position Switch SW1
Remote Fiber Fault Detect (Down=Enabled)
SW2
Symmetric Pause
SW3
Asymmetric Pause
SW4
Transparent Link Pass Through (UP=Enabled)
SW5
Fiber Auto-Negotiation (Down=Enabled)
SW6
Loopback (Down=Enabled)
Status LEDs PWR (Power)
Steady green LED indicates connection to external AC power
RXF (Fiber receive)
Flashing LED indicates reception of data on fiber link
LKF (Fiber link)
Steady LED indicates fiber link connection
RXC (Copper receive)
Flashing LED indicates reception of data on copper link
LKC (Copper link)
Steady LED indicates copper link connection
Dimensions Width
3.25" <82 mm>
Depth
4.8" <122 mm>
Height
1.0" <25 mm>
Power External AC/DC required; 12V DC, 1.5A; unregulated; standard
Environment
0 - 50° C operating; 5% - 95% humidity non-condensing; 0 - 10,000 feet altitude
Shipping Weight
2 lbs. <0.90 kg>
Safety Compliance Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
Regulatory Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty Lifetime
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.