Clear-Com ARCADIA-X5-16P Arcadia Central Station with 16 Ports and 5-Pin XLR-Female

Clear-Com ARCADIA-X5-16P Arcadia Central Station with 16 Ports and 5-Pin XLR-Female

Arcadia Central Station is the centerpiece of a scalable IP networked intercom platform with support for more than 100 wired and wireless intercom user stations of various form factors, frequencies and connectivity.

Key Features

• Flexible Dante and Analog Interfacing
• Easy to use CCM™ browser configuration
• Scalable capacity licensing
• Fast front panel color touch screen with tactile encoders for control and configuration
• Plug-and-go with central discovery and pairing
  Capacity
• FreeSpeak Wireless Intercom
• (10) E1 Transceivers (1.9(1), 2.4 GHz)
• (16) IP Transceivers (1.9(1), 5 GHz)
• (40) Beltpacks(2) (1.9(1), 2.4, 5 GHz)
• HelixNet Wired Intercom
• (24) Enabled Channels(2)
• (64) Endpoints (HRM, HKB, HXII-BP)
• Dante Audio Network Interfaces
• (64) Dante Ports(2)
  Connectivity
• (8) 4-Wire - 1 for PGM/SA
• (4) 2-Wire - 550mA per pair
• (2) GPI Optically Isolated
• (4) GPO Relay
• (2) FreeSpeak E1 - RJ45/SFP switchable
• (4) LAN - 2 x RJ45, 2 x SFP; Assignable to Management/HelixNet, AES67, Dante Primary and Secondary
  (1)1.9 GHz beltpack cannot roam between E1 and IPT transceivers. 1.9 GHz E1 and IPT transceivers should not overlap on the same system.
  (2)Requires Arcadia with sufficient number of Licensed Ports.

Technical Specifications

Capacity
FreeSpeak Wireless Intercom
(10) E1 Transceivers (1.9(1), 2.4 GHz)
(16) IP Transceivers (1.9(1), 5GHz)
(40) Beltpacks(2) (1.9(1), 2.4, 5GHz)

HelixNet Wired Intercom
(24) Enabled Channels(2)
(64) Endpoints (HRM, HKB, HXII-BP)

Dante Audio Network Interfaces
(64) Dante Ports(2)
Configuration
(128) Licensed Ports(2)
- FreeSpeak Beltpack
- HelixNet Enabled Channel
- Dante Port
(100) Channels
(100) Groups
(200) Roles for FreeSpeak & HelixNet
Licenses
Delivery: License Ticket, may include multiple licenses
License Host: Arcadia
Activation: Via CCM, Online (recommended) or Offline
Transferable: No, fixed to Arcadia
Recovery: Yes, by Clear-Com Support or Service Center
Connectors
Headset: 4-pin XLR-M (X4), 5-pin XLR-F (X5)
Gooseneck Microphone: ¼” TRS Threaded
2-Wire I/O: (4) XLR-3F
4-Wire I/O: (8) RJ45
Audio Crossover Mode: Software selectable
Program input/ Stage output: XLR-3F, XLR-3M
Special use of Port #8 using provided cable
GPIO: (2) DB9F
FreeSpeakII E1 TCVR/SPL Ports: 2 x RJ45, 2 x SFP (RJ45 or SFP)
FSII DECT Synchronization: 2 x RJ45 (Input and Output)
LAN: 2 x RJ45, 2 x SFP (Function assignable)
AC Power Connector: IEC-C14
DC Power Connector: KPJX-4S-S
Grounding Screw: Terminal
Microphone Input
Input Type: Dynamic/Electret - Selectable
Headset Mic Voltage: 5V
Input Level (nominal): -45dBu
Input Level (max): -10dBu
Frequency Response: 200Hz to 12kHz ±3dB
Mic Limiter Threshold: -35dBu ±3dB
Mic Limiter Range: >= 20dB
Loudspeaker and Amplifier
Speaker: 1.6 x 2.8”
Load: 4O
Max Speaker Level: 87dB ± 2dB SPL A at 3ft/1m
Frequency Response: 100Hz - 10kHz
Max Output Level before 1% Distortion: 18dBu ± 2dB
Total Harmonic Distortion (THD): < 0.5% THD at 1kHz
4-Wire Line Level Interfaces
Transformer balanced input and output
Input: Nominal Level: 0dBu (selectable)
Maximum Level: +18dBu
Frequency Response: 80Hz to 20kHz ±3dB
Impedance: >= 10KO
Output: Nominal Level: 0dBu (selectable)
Maximum Level: +18dBu
Frequency Response: 80Hz to 20kHz ±3dB
Impedance: 200O + 10%
2-Wire Partyline Interfaces
Unbalanced High-Impedance bridging
Compatibility: Clear-Com, RTS-TW with Call and Remote Mic Kill
Termination: Optional per pair (A/B or C/D)
Nulling: User initiated Auto-Calibration
Null Depth: >60dB at 1kHz
Nominal Level: -18dBu (CC), -12dBu (RTS-TW)
Headroom: 18dB
Frequency Response: 200Hz to 12kHz. ±3dB
Impedance: >= 10KΩ bridging
Total Harmonic Distortion (THD): < 0.1% THD @ 1 kHz
Power: 560mA optional per pair (A/B or C/D)
Voltage: 25-28V DC
Logic Inputs - GPI
Assignable to activation of audio crosspoints
Input: 2
Style: Optically isolated
Input Voltage Range: 4 - 30V DC or AC
Input Current: >=1.2mA required
Logic Outputs - GPO/Relay
Assignable to talk, call keys and audio crosspoints
Outputs: 4
Style: SPDT / Power Relay
Normalized: Open or Closed, separate pins
Switching Voltage (Max): 30V DC
Switching Current (Max): 1A
Power
AC Internal Power Supply:
Input Frequency Range: 100 - 240V AC
Input Frequency Range: 50 - 60Hz
Input Power (Max): 160W
BTU (Max): 545BTU/h
Input Power Connector: IEC-C14
DC Power Input:
Voltage: 12V DC ± 5%
Current (Max): 12A
Power (Max): 144W
BTU (Max): 491BTU/hr
Input Power Connector: KPJX-4S-S
Environmental
Operating: 32° to 113°F (0° to 45°C)
Storage: 86° to 158°F (30° to 70°C)
Humidity: 20-90% Non-Condensing
Dimensions
1RU 19 x 1.7 x 13.9in (WxHxD)
(482.6 x 43.2 x 353.1mm)
Weight
7.3lbs (3.3kg)
Footnotes
(1)1.9 GHz beltpack cannot roam between E1 and IPT transceivers. 1.9 GHz E1 and IPT transceivers should not overlap on the same system.
(2)Requires Arcadia with sufficient number of Licensed Ports.