Ikan OTT-CONTROLLER-V2 OTTICA IP PTZ Camera Controller

Ikan OTT-CONTROLLER-V2 OTTICA IP PTZ Camera Controller

The Ikan OTT-CONTROLLER-V2 is a compact PTZ controller that allows you to control up to 5 cameras using either IP or analog control protocols. The large LED screen displays menu settings and network information, whereas the smaller LED screens allows you to control various exposure and color parameters.

CONTROLLER INTERFACE
The OTT-CONTROLLER-V2 has ports for RJ45, RS232 (DB9), RS422 & RS485 (Terminal Connector), 12v Barrel Connector, and USB micro (for firmware upgrade).

PRECISE CONTROLS
This compact camera controller features a high‐quality 2-axis joystick for smooth control of pan & tilt, and a zoom rocker. Two separate knobs allow for control of Focus & PTZ/Focus Speed. The speed knob provides 7 levels of adjustment. Pressing and holding the Fn button will move the camera back into the default position.

QUICK CAMERA PARAMETER ADJUSTMENT
By pressing either AE Mode or WB Mode buttons, the three smaller LED screens will display different settings combinations that correlate to the mode you select. Each screen has a designated knob for adjusting the value of the parameter displayed on the LED screen. These parameters include focus, gain, iris, gain limit, brightness, exposure compensation, shutter, red gain, blue gain, and color temperature.

SIMULTANEOUS PROTOCOL CONTROL
The OTT-CONTROLLER-V2 gives you flexibility when operating different cameras with different control protocols. Other controllers might only allow you to control using one protocol at any given time, whereas this controller enables you to mix & match different control protocols simultaneously. Compatible protocols include: IP VISCA, VISCA, PELCO D/P.

PRESET POSITIONS
To create a camera preset, simply press and hold one of the preset buttons for 2 seconds. When you want to call that preset, tap the same button and your camera will move to the desired preset position.

Key Features

• Supports IP VISCA, Serial Port VISCA, PELCO‐D/P Protocols Simultaneously
• RJ45, RS422, RS232, RS485 Control Interfaces
• Control up to 5 Cameras
• 3 Knobs Control Camera Parameters Displayed on Designated LED Screens
• Streamlined Camera Preset Configuration

Technical Specifications

Controllable Cameras
5
Communication Protocol
VISCA, PELCO P/D, UDP
Number of LED Displays
4 Color LED Display Screens
Number of Camera Channels
5
Variable Knobs
4
Joystick
2-Axis
Zoom Mode
Tele-Wide Bridge Keys
Buttons
17 Silicon Buttons
Presets Short Keys
5 Presets or Max 10 Presets for selection per Each Channel
Focus Modes
Auto/ Manual/ OPT
Pan/Tilt Rotation Speed
7-Level Adjustment
Zoom In/Out Speed
7-Level Adjustment
Baud Rate
2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Data Bits
8 Bit
Stop Bit
1 Bit
Parity Bit
None
Internet Protocol
UDP / IP VISCA
Rated Voltage
DC 12V
Rated Current
0.3A max
Max Power Consumption
3.6W
Password Privacy Protection
Yes
Security Lock
Kingston’s Security Lock
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ +60°C / -4°F ~ 140°F
Working Environment
Indoors
Dimensions (L x W x H)
9.6" x 6.4 x 1.8" / 244 x 164 x 48mm"
G.W
2.4 lbs. / 1.1 kg
RS422/RS485 Interface
Phoenix Contact 4 pin 3.81mm Terminal
RS232C Interface
DB9 Male Interface
LAN Interface
RJ45 Female Interface
Power Supply
12V 100-240VAC 50-60Hz
Firmware Upgrade
Via Micro USB
What's Included
1 x PTZ Controller
1 x Phoenix Contact 4 pin 3.81mm Terminal
1 x Power Adapter
1 x User Manual