NUX PDI-1G Guitar Direct Box – Phantom/9 V Powered DI | NUX
More finance options:
Last 1
Estimated Shipping Widget will be displayed here!
Condition: New
Additional Description: Direct box with cab simulation, ground-lift and phantom/9 V power.
NUX PDI-1G Guitar Direct Box
Convert instrument-level signals to balanced mic level with studio-grade clarity—on stage, in rehearsal, or in the studio.
Key Features & Benefits
- High-impedance ¼″ input optimised for guitar, bass or line signals, preserving tone before conversion.
- Selectable speaker-cabinet simulation lets you send amp-like character direct to FOH or recording interface—no microphone needed.
- 48 V phantom or 9 V DC power for maximum flexibility with mixers, audio interfaces or pedalboards.
- Ground-lift switch eliminates hum and buzz caused by ground loops in complex stage rigs.
- Parallel (thru) output feeds your backline amplifier while the balanced XLR feeds the console.
- Input level switch (–20 / 0 / +20 dBu) matches everything from passive pickups to hot amp outputs without clipping.
- Wide 10 Hz – 40 kHz bandwidth and THD+N below 0.06 % ensure transparent, high-fidelity signal transfer.
- Rugged steel chassis measuring only 121 × 80 × 55 mm and weighing 350 g—built for daily gig abuse.
- Low-noise design with –110 dBu noise floor keeps recordings clean even at high-gain mixer settings.
Overview
The NUX PDI-1G is an active direct-injection box created for guitarists, bassists and audio technicians who need consistent, studio-quality signal conversion in a durable, travel-ready package. It converts your instrument’s high-impedance, unbalanced output to a low-impedance, balanced XLR feed—ideal for long cable runs and noise-sensitive environments. A front-panel cabinet-simulation switch can emulate a miked 4×12 enclosure, giving engineers a ready-to-mix tone without stage microphones.
Performance & Connectivity
A three-position input-level selector accommodates everything from passive single-coils to powered amp heads, while the thru jack preserves your onstage backline sound. The balanced XLR output is powered either by console phantom power or a standard 9 V pedal-supply, making the PDI-1G equally at home on silent stages and traditional rigs.
Design & Construction
The enclosure is fabricated from powder-coated steel for optimal shielding and road-worthy resilience. Recessed switches resist accidental knocks, and the compact footprint slots neatly between pedals or at the foot of your amp.
Use Cases & Applications
• Silent stage setups where cab simulation replaces loud amplifiers.
• Home-studio re-amping: run an amp head into the PDI-1G, capture the balanced output and monitor through the parallel speaker cab.
• Touring rigs needing ground isolation between backline and front-of-house mixers.
• Live-stream guitar performances requiring direct, low-noise feeds into audio interfaces.
• Bassists converting instrument output to mic level for FOH while retaining cabinet monitoring.
What's Included
• NUX PDI-1G Guitar Direct Box
• Quick-start leaflet
• Limited one-year warranty card (manufacturer)
Complete Technical Specifications
Electronics
- Input Impedance: 1 MΩ (Hi-Z)
- Input-Level Switch: –20 dBu / 0 dBu / +20 dBu
- Max Input Level: +48 dBu
- Frequency Response: 10 Hz – 40 kHz (–1 dBu)
- THD+N: 0.055 % @ 100 Hz
- Noise Floor: –110 dBu
Power
- Power Options: 48 V phantom or 9 V DC (centre-negative)
- Current Draw: 6.5 mA
I/O
- Input: ¼″ TS
- Parallel Out: ¼″ TS
- Balanced Out: XLR male
- Controls: Ground-Lift switch; Cab-Sim switch; Input-Level selector
Physical
- Dimensions: 121 × 80 × 55 mm (L × W × H)
- Weight: 350 g
- Housing: Powder-coated steel
Why Choose the PDI-1G?
Many entry-level DI boxes lack cabinet simulation or require phantom power exclusively. The PDI-1G offers both phantom and 9 V options, adds selectable cab-sim, and provides an input-level switch normally found only on higher-priced units. At just over fifty dollars, it outperforms simple passive DIs and rivals premium models at double the cost.
Frequently Asked Questions
Is the PDI-1G truly passive or active?
The signal path is transformer-isolated, but active buffering requires either 48 V phantom power or a 9 V adapter to enable the cabinet-simulation circuit.
Can I run an amplifier head’s speaker output into the PDI-1G?
Yes—use the input-level selector at –20 dBu and route the parallel out to your cabinet while the XLR feeds the mixer.
Does the cab-sim affect the parallel output?
No. The cab-sim is applied only to the balanced XLR output; the thru jack remains unaffected.
Will 24 V phantom power operate the unit?
No. The minimum phantom-power requirement is 48 V for full functionality.
Is a power supply included?
A 9 V adapter is not included; most users rely on console phantom power or an existing pedalboard supply.
Payment security
Advanced Encryption Technology
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
