JBL CONTROL 40CS/T 8" High Impact In-Ceiling Subwoofer (pair)

Control 40CS/T is a direct radiating, high impact, 8" subwoofer designed to produce powerful bass performance in an in-ceiling loudspeaker. Featuring high power handling and low distortion, the Control 40CS/T subwoofer is perfect for in-ceiling sound systems requiring higher fidelity and low end extension.

The Control 40CS/T also features a builtin passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42C, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance.

Featuring a large backcan along with a high powered driver, the Control 40CS/T provides extended bass response for a warm full-bodied tone. The system’s 200 mm (8 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity.

Ideal for small and large projects alike, the Control 40CS/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.

Key Features

• Extended Bass Response with Maximum Impact
• Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
• Switchable 70V/100V or Low-Z
• Elegant design fits any décor

Technical Specs

System
Frequency Range (-10 dB)
32 Hz - 300 Hz
Frequency Response (± 3 dB)
50 Hz - 180 Hz
Power Capacity
200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
Nominal Sensitivity (2.83V/1m)
95 dB (near corner), 89 dB (center of ceiling)
Rated Maximum SPL
109 dB @ 1 m (3.3 ft) average, 115 dB peak (center of ceiling)
115 dB @ 1 m (3.3 ft) average, 121 dB peak (near corner)
Rated Impedance
8 ohms (in bypass mode)
Transformer Taps
80 W 40 W, 20 W, (& 10 W @ 70V)
Transducer
Driver
200 mm (8 in) with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former.
Enclosure
Input Connectors
Six removeable locking 2-pin connectors with screwdown terminals. Max wire 12 AWG (2.5 mm)
Knockouts
Two (top and side)
Safety Agency
Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
Dimensions
332 mm Diameter x 338 mm Depth from back of baffle
(13.1 in x 13.3 in)
Cutout Size
307 mm Diameter (12.1 in)
Ceiling Thickness Range
Accommodates tiles/drywall up to 70 mm (2.75 inches) thick
Weight
8.1 kg (17.9 lbs)
Included Accessories
C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles), knockout strain relief, cutout template, paint shield.
Optional Accessories
MTC-19NC New Construction Bracket,
MTC-19MR Mud Ring Construction Bracket