DPA 4017B Shotgun Microphone
DPA 4017B Shotgun Microphone
Free Shipping
DPA 4017B Shotgun Microphone
The DPA 4017B Shotgun Microphone is a professional, versatile microphone designed for demanding sound capturing in film, video, sound reinforcement and even music recording. The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.
The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction. Two onboard filters eliminate noise and artifacts with a 4dB shelf at 8kHz and a first-order bass roll-off below 120Hz. The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.
Wide Frequency Response and Excellent Clarity The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction. Superb Off-Axis Rejection The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise, etc. Short and Lightweight Profile The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.
Key Features
- Excellent Off-Axis Rejection
- Immune to RFI
- Short and Lightweight
- Remarkable Clarity
Technical Specs
Transducer
Pre-Polarized Condenser
Polar Pattern
Supercardioid with Interference Tube
Frequency Response
70Hz - 20kHz, permanent third order high pass filter at 50Hz (+/-2dB)
Sensitivity
nominal Ā± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
EIN
A-weighted: Typ. 14 dB(A) re. 20 ĀµPa (max. 15 dB(A))
Noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)
Dynamic Range (Typical)
Typ. 119 dB
Signal-to-Noise Ratio
Typ. 80dB (A)
THD
< 1 % up to 133 dB SPL peak
Common Mode Rejection
> 40dB
Maximum Input Sound Level
152dB
Power Requirements
48V Phantom Power
Current Consumption:
4.5mA
Output Voltage:
> 1.8V
Output Impedance
> 150 ohms
Output Connectors
3-pin XLR Cable Drive: 328' (100m)
Pad
No
Low Frequency Roll-Off
Permanent third order high pass filter at 50Hz
Temperature
-40 Ā° to 45 Ā°C (14 Ā° to 113 Ā°F)
Operating Relative Humidity
Up to 90%
Dimensions
8.3 x 0.75" (212 x 19mm) (Length x Diameter)
Weight
68g (2.4 oz)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
