DPA FIOF56-M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom Beige
DPA FIOF56-M Single-Ear Omnidirectional Mic with a TA-5F Connector ...
Free Shipping
DPA FIOF56-M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom Beige
The DPA FIOF56M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom | Beige features a 90mm boom arm that has wind and pop protection integrated into the microphone design. The boom and earhook can be rotated for use on your left or right ear and have a lightweight 0.30-ounce design for minimal visual impact. The d:fine Headset Microphone has a maximum sound pressure level (SPL) of 144dB, allowing it to be used for both speaking and singing applications. It can be used in scenarios when hands-free miking is desired, such as corporate presentations, lectures, or in houses of worship.
Key Features
- Omnidirectional Polar Pattern
- Condenser Element
- 144dB Max SPL
- 90mm Boom Length
- TA-4F Connector
- 3 x Windscreens
- Wearable on Left/Right Ear
- Minimal Visual Impact
Technical Specs
Transducer
Pre-polarized condenser
Polar Pattern
Omnidirectional
Principle of Operation
Pressure or pressure gradient
Frequency Response
20 Hz to 20 kHz
3 dB boost at 8 to 15 kHz
Maximum SPL
144 dB
Dynamic Range (Typical)
97 dB (typical)
Signal-to-Noise Ratio
68 dB A typical, A-weighted @ 1 kHz @ 1 Pa (94 dB SPL)
Power Requirements
5 to maximum 50 V through DPA adapter for wireless systems
Total Harmonic Distortion
< 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Output Impedance
30 to 40 Ī©
Output Connectors
TA-5F Connector for Lectrosonics Wireless Transmitters
CMRR
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Current Consumption
1.5 mA (microphone, typical)
Sensitivity
6 mV/Pa; -44 dB @ 1 V/Pa (nominal, Ā± 3 dB @ 1 kHz)
Noise Level
A-weighted: 26 dB A @ 20 ĀµPa (maximum 28 dB A, typical)
ITU-R BS.468-4: 38 dB (maximum 40 dB, typical)
Cable
Length: 4.3' (1.3 m)
Diameter: 0.06" (1.60 mm)
Boom
Length: 3.5" (90 mm)
Capsule Diameter
0.2" (5.4 mm)
EMC Compatibility
Fully compatible
Temperature Range
-40 to 113Ā°F (-40 to 45Ā°C)
Relative Humidity
ā¤ 90%
Microphone Head Size
0.37 x 0.21 x 0.11" (9.50 x 5.30 x 2.90 mm)
Weight
Microphone boom: 0.03 oz (0.8 g)
Earhook: 0.04 oz (1.1 g)
Cable: 0.23 oz (6.6 g)
Total weight: 0.3 oz (8.5 g)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
