Dracast DRDRINTKBV Pro Series Bi-Color 3-Light Interview Kit with V-Mount Battery Plates

Dracast DRDRINTKBV Pro Series Bi-Color 3-Light Interview Kit with V-Mount Battery Plates

Ideal for location shooters, Dracast Pro Series Bi-Color 3-Light Interview Kit with V-Mount Battery Plates and Stands is comprised of 2 LED500 Pro Bi-Color lights, each with a multi-voltage power adapter, soft case, an 8.7’ light stand, V-mount battery plate, and battery. A dual charger is included for the batteries. An LED160A Bi-Color light is also included with a power supply, built-in Sony NP-F series battery plate, battery, charger, and soft case. And, this kit has two filter frames and two filter packs for use with the LED500 lights.

The Bi-Color LED160A employs 160 LEDs, with a CRI rating of 95, providing 3200-5600K output with precise, accurate color rendering and a beam spread of 45 degrees. It features an aluminum chassis for strength and durability but weighs only 1/2 pound. A built-in dimmer controls light output from 0 to 100% without flicker at any frame rate. A separate knob controls the color temperature balance of the LEDs. The light runs on AC via an adapter or on NPF-type camera batteries that mount to its built-in battery plate.

At just 4.0 lb the LED500 Pro Bi-Color LED Light is an ideal choice for location work, interviews and small sets where color accuracy, control and flicker-free output are of major importance. Variable color temperature from 3200-5600K or anywhere in between means that you can quickly match the prevailing ambient or artificial light balance with a simple twist of a knob while others are still applying filters. Dimming is equally convenient via another knob that adjusts the light intensity from 0-100% with negligible color shift. The LED500 outputs the hot light equivalent of 500W but you won’t have to be concerned about the talent’s comfort - the panel runs barely warm to the touch. And the low electrical draw of just 30W means a timely return on your investment.

The durable anodized aluminum frame is supported by an oversized, U-shaped yoke with locking knobs on each side and a standard 5/8” receiver. The LED500 can be used worldwide, powered by a 100-240 VAC adapter or by optional 12 VDC batteries.

LED500 Pro Bi-Color LED Light with V-Mount Battery Plate
At just 4.0 lb the LED500 Pro Bi-Color LED Light from Dracast is an ideal choice for location work, interviews and small sets where color accuracy, control and flicker-free output are of major importance. Variable color temperature from 3200K-5600K or anywhere in between means that you can quickly match the prevailing ambient or artificial light balance with a simple twist of a knob while others are still applying filters. Dimming is equally convenient via another knob that adjusts the light intensity from 100-0% with negligible color shift. The low electrical draw of just 30W means a timely return on your investment.

The durable anodized aluminum frame is supported by an oversized, U-shaped yoke with locking knobs on each side and a standard 5/8” receiver. The LED500 can be used worldwide, powered by the included 100-240 VAC adapter in the studio, or by V-Mount batteries in the field. Four-way barndoors for contouring and control of the LED500’s 45-degree beam angle are available separately. For protection during transport and storage, a carry case is included.

LED160 3200-5600K Variable Color On-Camera Light with Battery and Charger (Aluminum, Blue)
This is a 3200-5600K variable-color Dracast LED160 On-Camera Light, housed in an aluminum, blue case and measures a compact 6 x 4”. It features a high, 160W equivalent light output with a 45 flood beam angle. It’ll give you approximately 20 ft effective distance.

Battery and Dual Charger Kit (V-Mount)
This Battery and Dual Charger Kit from Dracast is comprised of two V-mount lithium-ion batteries and a portable dual V-mount battery charger for refreshing up to two batteries simultaneously. Each of the 14.8V batteries have an 89Wh capacity, built-in power tap, and an integrated five LED status indicator for quickly gauging the power level. The included charger is fitted with dual V-mount plates for charging one or two batteries at a time. The unit incorporates a 4-pin XLR DC input as well as a capacity management system to ensure fast charging speeds.

Filter Frame for LED500 Light
The Dracast Filter Frame for LED500 allows the use of Dracast or other brand diffusion, CTO, CTB or effects filters with the fixture. Constructed of lightweight aluminum, the frame drops into the fixture’s accessory channel. It has a frame lock to prevent filter slippage.

Filter Set for LED500 Light (5-Piece)
The Dracast 5 Filter Set for LED500 Light contains rigid light modifiers that measure approximately 12 x 6” to match the fixture. Included in the kit are one each: 1/4, 1/2, and Full CTO filters to change the light’s daylight balance to tungsten. A Half White Diffusion and an Opal Frost Diffusion Filter are also included to soften the light’s output.

In the Box - Bundle Items
2 x LED500 Pro Bi-Color LED Light with V-Mount Battery Plate
-Carry Case
-AC Power Adapter for LED500 Light
-Limited 1-Year Warranty
LED160 3200-5600K Variable Color On-Camera Light with Battery and Charger (Aluminum, Blue)
-Nylon Soft Case
-Shoulder Strap
-Hot-Shoe Mount
-P-Tap to DC Connector Cable
-Power Supply 2-Prong U.S.
-NP-F990 L Series Battery
-Charger
-Limited 1-Year Warranty
Battery and Dual Charger Kit (V-Mount)
-2 x 89W/h Lithium-ion Battery (V-Mount)
-Dual Battery Charger (V-Mount)
2 x Filter Frame for LED500 Light
-Limited 1-Year Warranty
2 x Filter Set for LED500 Light (5-Piece)
-CTO Filter (Full)
-CTO Filter (1/2)
-CTO Filter (1/4)
-Half White Diffusion Filter
-Opal Frost Diffusion Filter
Also Includes
-Sony NP-F Battery with Charger
-2 x Barndoors
-2 x 8.7” Light Stands
-Hard Carrying Case

Technical Specifications

LED500 Pro Bi-Color LED Light with V-Mount Battery Plate
Light Fixture
Beam Angle: 45
Color Temperature: 3200 to 5600K
Color Accuracy Standard: CRI 95
Cooling System: None
Dimming: Yes, 0 to 100%
Display: None
Housing Material: Aluminum
Fixture Dimensions: 12.0 x 6.0 x 2.0" / 305.0 x 152.0 x 51.0 mm
Fixture Weight: 4 lb / 1.8 kg
Connectors
Battery Plate: 1 x V-Mount
Mounting
Yoke Mount: TVMP/ Hex Bolt
Fixture Mount: 5/8" Receiver
Accessory Mount: None
Power
AC Input Power: 100 to 240 VAC, 50 / 60 Hz
DC Input Power: 12 VDC
Power Source: AC Adapter, External Battery
Max Power Consumption: 30 W
Physical
IP Rating: IP20
Packaging Info
Box Dimensions (LxWxH): 18.11 x 11.654 x 8.268"

LED160 3200-5600K Variable Color On-Camera Light with Battery and Charger (Aluminum, Blue)
Light Fixture
Beam Angle: 45
Color Temperature: 3200 to 5600K
Color Accuracy Standard: CRI 95
Expected Lamp Life: 50000 Hours
Number of LEDs: 160
Effective Distance: 20.0' / 6.0 m
Power
Battery Plate: 1 x Sony L-Series
DC Input Power: 7.2 to 8.4 VDC
Max Power Consumption: 9.5 W
Physical
Mount Type: 1/4"-20 Female Thread
Dimensions: 6 x 4 x 2" / 15 x 10 x 5 cm
Weight: 0.5 lb / 227 g