Parasound Halo Series A 51 Power Amplifier | 400W x 5 Channels

Parasound Halo Series A 51 Power Amplifier | 400W x 5 Channels

The Parasound Halo A 51 is a five-channel power amplifier built for high-performance home theater systems requiring substantial power across all channels simultaneously. Fitted in a 4U chassis measuring 17.25 by 5.25 by 20 inches and weighing 55 lbs net, it outputs 180 watts RMS per channel into 8 ohms and 255 watts RMS per channel into 4 ohms with all five channels driven. It is well suited to anchor a surround sound system around demanding multi-channel speaker arrays.

The amplifier supplies 45 amps peak current per channel and maintains total harmonic distortion at 0.05 percent RMS continuous across the full audio band. Frequency response extends from 5 Hz to 100 kHz within 3 dB. Signal-to-noise ratio exceeds 112 dB IHF A-weighted. Both balanced XLR and unbalanced inputs are accepted with a 29 dB gain stage. Standby power draw is 1 watt, rising to a maximum of 1,500 watts at full output. An external trigger accepts 9-12 Vdc.

Key Features

• 180W RMS x 5 into 8 ohms, all channels driven
• 255W RMS x 5 into 4 ohms, all channels driven
• 45 amps peak current per channel
• THD 0.05% RMS continuous, full audio band
• SNR greater than 112 dB, IHF A-weighted
• Balanced XLR and unbalanced inputs
• 4U chassis, net weight 55 lbs

Specifications

• Rack Spacing: 4U
• Channels: 5-Channel
• Watts Per Channel: 201-300W
• Power Output @ 8 ohm: 180W RMS x 5, 20 Hz - 20 kHz, 8 Ω, all channels driven
• Power Output @ 4 ohm: 255W RMS x 5, 20 Hz - 20 kHz, 4 Ω, all channels driven
• Power Output Bridged @ 8 ohm: n/a
• Power Consumption: Standby: 1W Idle: 125W Maximum: 1500W
• Current Rating: 45 amps peak, per channel
• Total Harmonic Distortion (THD): 0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz)
• Power RMS: Yes
• Frequency Response: 5 Hz - 100 kHz, +0/-3 dB 20 Hz - 20 kHz, +0/-0.3 dB
• Audio Crosstalk: > 78 dB at 1 kHz > 63 dB at 20 kHz
• Impedance Input: Unbalanced: 47 kΩ Balanced: 94 kΩ, 47 kΩ per leg
• Audio Gain: 29 dB
• Sensitivity Input: Unbalanced: 1 V Balanced: 1 V per leg
• Signal to Noise Ratio: > 112 dB, input shorted, IHF A-weighted > 102 dB, input shorted, unweigh
• Amplifier Requirements: Audio Trigger: 2 mV - 10 mV
• External Trigger Voltage: +9 Vdc to +12 Vdc, 2 mA
• Connectors: XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return)
• Dimensions (W x H x D): 17.25" x 5.25" x 20" (437 x 133 x 508mm) (without feet)17.25" x 5.88" x 20" (437 x 149 x 508mm) (with feet) Depth with cables: 21.25" (540mm)
• Weight: Net Weight: 55 lbs (25 kg)Shipping Weight: 69 lbs (31.3 kg)