JBL AWC62 Compact 2 Way Coaxial Loudspeaker White Single Unit

The AWC62 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.

Key Features

• Highly weather-resistant IP56 rating.
• Consistent 110 degrees x 110 degrees broadband pattern control.
• Components: 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil. 25 mm (1 in) exit compression driver
• Extraordinary clarity for speech, with extended frequency response for music.
• Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
• 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
• High-power passive crossover network.
• Overload protection.
• 70 Hz - 18 kHz frequency response.
• 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8 OHM low-impedance.

Technical Specifications

Frequency Range (-10 dB)
70 Hz - 18 kHz
Frequency Response (-,+3 dB)
100 Hz - 16 kHz
Coverage Pattern
110 degrees x 110 degrees
Directivity Factor
7.2 (1 k - 16 kHz)
Directivity Index (DI)
7.9 dB (1 k - 16 kHz)
Long-Term System Power Rating (IEC)
175 W 2 hrs.
120 W 100 hrs
Sensitivity (2.83V @ 1m)
92 dB (Ave. 100 Hz - 18 kHz)
Maximum SPL
Direct 8 OHM: 114 dB (peaks of 120 dB)
120 W Tap: 112 dB
Crossover Network
1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF
Nominal Impedance
8 ohms
Transformer Taps
70V: 120W, 60W, 30W, 15W
100V: 120W, 60W, 30W
Low Frequency Driver
Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil.
High Frequency Driver
25 mm (1 in) diaphragm and voice coil diameter
HF Driver Protection
Minimum audibility SonicGuard HF overload protection
Enclosure
ABS with Glass enclosure
Attachment
Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille
Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection
CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36").
Environmental
IP56 per IEC529, with a minimum 5 degrees downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
Dimensions
259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet
288 mm (11.4 in) including gland nut
309 mm (12.2 in) including bracket extending to back
Colors
Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight
6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket
Shipping Weight
8.8 kg (19.5 lb)
Included Accessories
U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel.