JBL C67P/T Extended Range Full Range Pendant Speaker BLACK (pair)
The JBL Control 67P/T is a high output, full-range, two-way pendant-type loudspeaker (Black) that provides superb sound reproduction and very consistent, wide coverage for rooms with open architecture ceilings and other locations where a pendant form factor is desired.
JBL's patent-pending Radiation Boundary Integrator (RBI) technology, adapted from the groundbreaking VERTEC Series of line array loudspeakers, delivers consistent coverage of the listening area. Combining an extra-large 280 mm (11 in) diameter waveguide with low-frequency projection apertures, the two coaxially-mounted drivers provide a seamless integration of coverage, resulting in extremely even pattern control and coverage where all listeners hear a consistent, high-fidelity sound quality. The wide 120Deg. coverage pattern allows for the use of fewer speakers, reducing the cost of the installed system without sacrificing performance.
Excellent sound quality coupled with stylish design and easy installation makes the Control 67P/T ideal for a wide variety of open-ceiling applications. The Control 67P/T includes a single-point mounting system for easy and secure suspension in open-ceiling applications. Two complete hanging cable systems are included, providing both main and safety suspension cables.
The system's 165 mm (6.5 ") low-frequency driver features a polypropylene-coated cone and 25 mm (1 in) copper voice coil with vented fiberglass resin coil-former for high power handling and improved long-term reliability. The coaxially-mounted 25 mm (1") textile soft dome high frequency driver features internal damping for smooth extended response, along with an aluminum voice coil former and neodymium magnet assembly with ferro fluid cooling, for high-fidelity sound quality with enhanced long-term sound level capability.
The Control 67P/T contains a high-quality 60 Watt multi-tap transformer for use on 70V/100V distributed loudspeaker lines and is switchable for 8-ohm voice-coil direct operation. Euro-style clip-in connectors allow for easy wiring. For protected outdoor applications, rubber boots are included to cover the input connectors and an optional terminal cover is available for harsher locations.
Key Features
- JBL's exclusive conical Radiation Boundary Integrator (RBI) technology provides consistent and wide 120Deg. coverage of the listening area
- Coaxial design featuring 165 mm (6.5 in) woofer and 25 mm (1 in) soft-dome tweeter
- Hanging hardware with 4.5 m (15 feet) galvanized steel cable and easy to adjust clamp
- UL listed (speaker and hanging cable system)
- 8 ohm and 70V/100V operation
Technical specs
Frequency Response (-10 dB)
58 Hz - 18 kHz
Frequency Range (±3 dB)
78 Hz - 16 kHz
Power Capacity
75 Watts Continuous Pink Noise Power (with 300 Watts peaks)
150 Watts Continuous Program Power
Nominal Sensitivity
90 dB
Nominal Coverage Angle
120Deg. (+20Deg./-15Deg.)
Directivity (Q)
5.7
Directivity Index (DI)
7.5 dB
Rated Maximum SPL @ 1m
109 dB continuous pink noise, 115 dB peak
Rated Impedance
8 ohms
Transformer Taps
70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
Transformer Insertion Loss
0.5 dB @ 7.5 W, 0.5 dB @ 15 W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
Transducer LF Driver
165 mm (6.5 in) polypropylene-coated paper with pure butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil-former
Transducer HF Driver
25 mm (1.0 in) textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
Enclosure Material
High impact polystyrene
Grille
Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
Environmental
Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV
IP44 capability per IEC 529 - splash proof rating
Termination
Two removable locking euro-block 2-pin connectors with screw down terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included
Suspension
Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
Safety Agency Ratings
Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple-brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 & Class 3426-81
Dimensions
312 mm (12.3 in) diameter x 330 mm (13.0 in) height to top of cabinet. 350 mm (13.8 in) to top of suspension bracket
Weight
5.2 kg (11.5 lbs)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.