Intelix INT-USB3-H USB 3.2 Gen 1 Extender Host over HDBaseT

Intelix INT-USB3-H USB 3.2 Gen 1 Extender Host over HDBaseT

The Intelix INT-USB3-H USB 3.2 Gen 1 Extender Host transmits a USB 3.2 Gen 1 signal up to 100 meters (328 feet) over a single CAT6a cable using HDBaseT VS6320 technology. The host-side transmitter delivers full 5Gbps performance with one USB Type-B host port, two USB Type-A device ports, RS-232 pass-through, FSYNC pass-through, and bidirectional 24V Power over Cable (PoC).

Engineered for integrators searching for the best USB 3.2 extender for conference room PTZ cameras, the INT-USB3-H pairs with the companion INT-USB3-C client device (sold separately) to relocate USB peripherals well beyond the standard 3-meter USB cable limit. It is purpose-built for long distance USB extension in huddle rooms, lecture halls, training centers, broadcast suites, and unified communications spaces where webcams, USB microphones, touch displays, and capture devices must be positioned far from the host PC.

Built on the HDBaseT VS6320 chipset, the INT-USB3-H supports isochronous and bulk transfer modes for reliable performance with bandwidth-sensitive devices including 4K USB cameras, USB audio interfaces, and DisplayLink peripherals. The unit is plug-and-play, backwards compatible with USB 2.0 and USB 1.1, TAA Compliant for government and education procurement, and ships with both USB-C to USB-B and USB-A to USB-B 2-meter cables for connection to host computers with either connector type.

Key Features of the Intelix USB 3.2 Gen 1 HDBaseT Extender Host

• USB 3.2 Gen 1 Extension to 328 ft: Delivers full 5Gbps USB data transfer up to 100 meters over a single U/FTP CAT6a or higher cable run, eliminating the need for fiber or active USB cables.
• HDBaseT VS6320 Transport: Uses proven HDBaseT signaling for stable, low-latency USB extension over standard structured cabling already installed in most commercial AV deployments.
• Reliable USB Type-B Host Connection: The locked USB Type-B host port provides a more secure connection at the wall or rack than USB-C, and includes a USB-C to USB-B cable for modern laptops.
• Two USB Type-A Device Ports: Local USB-A passthrough at the host end enables a flash drive, keyboard, or mouse to share the same extender without an extra hub, with up to 5V/1.5A output per port.
• RS-232 and FSYNC Pass-Through: Carries serial control and frame-sync signals alongside USB data for integrated room control systems and synchronized camera deployments.
• Bidirectional 24V PoC: Supports power-over-cable in either direction, reducing the number of local power supplies required at the remote endpoint and simplifying wall plate installations.
• Backward Compatible with USB 2.0 and 1.1: Supports legacy peripherals alongside USB 3.2 devices, including isochronous and bulk transfer types for cameras, audio interfaces, and storage.
• TAA Compliant Metal Enclosure: Black rugged metal chassis meets Trade Agreements Act requirements for federal, state, and education procurement contracts.

Technical Specifications

• Part Number: INT-USB3-H
• Device Type: Host (Local) Side Extender, Box Format
• USB Standard: USB 3.2 Gen 1 (5Gbps), backward compatible with USB 2.0 and 1.1
• Maximum Extension Distance: 100 m / 328 ft over U/FTP CAT6a or higher
• HDBaseT Chipset: VS6320
• Host Input: 1 x USB Type-B (9-pin female)
• Local USB Output: 2 x USB Type-A (9-pin female), 5V/1.5A per port
• HDBT Output: 1 x RJ45 connector with 24V PoC
• Control Ports: 1 x RS-232 (3-pin 3.5mm Phoenix), 1 x FSYNC (1-pin 3.5mm Phoenix)
• Firmware Port: 1 x USB Type-C
• Power Input: AC 100-240V, 50/60Hz
• Power Output: DC 24V / 2.7A
• PoC Power Supply: 48W (Max)
• Transfer Modes Supported: Isochronous, Bulk, Interrupt, Control
• Enclosure: Metal
• Color: Black
• Operating Temperature: 32 to 104 degrees F (0 to 40 degrees C)
• Compliance: TAA Compliant
• Weight: 0.13 lbs (60 g)
• Dimensions (W x D x H): 2.95" x 5.51" x 0.91" (75 x 140 x 23 mm)

What's Included

• 1 x INT-USB3-H Host Extender Unit
• 1 x USB 3.x Type-C to Type-B Cable (2 meters)
• 1 x USB 3.x Type-A to Type-B Cable (2 meters)