Electro-Voice FM6.2 Dual 6-Inch Flush Mount In-Wall Speaker System

Electro-Voice FM6.2 Dual 6-Inch Flush Mount In-Wall Speaker System

The Electro-Voice FM6.2 Dual 6-Inch Flush Mount In-Wall Speaker System is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 6.5” two-way loudspeaker coupled with a 6.5” passive radiator and an internal line-matching transformer. The loudspeaker features 6.5” low-frequency cone and high-temperature voice-coil assembly along with a 6.5” long excursion passive radiator and titanium coated dome tweeter. The EVID FM6.2 loudspeaker utilizes a crossover network, centered at 3,300 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the FM6.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels.

The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.

The perforated grille is finished in semi-gloss white powder-coat­ed enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensur­ing extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was opti­mized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4” deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM6.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installa­tion, and wide-range reproduction of music or voice.

Key Features

• 6.5” two-way system with polypropylene diaphragm for reliable long-term operation.
• 6.5” passive radiator coupled to the woofer dramatically extends and smoothes the low frequency response.
• Extremely compact depth fits into tight spaces including walls and tight ceiling spaces.
• Titanium coated tweeter gives even uniform high fre­quency coverage
• Full bandwidth overload protection
• Front baffle wattage tap adjustment allows for easy level matching after installation.
• Easy 4 pin phoenix style terminals for quick installation
• Integrated low loss matching transformer allows for either 70v/100v or 8 ohm operation.

Technical Specs

Frequency Response (-3dB)

60Hz – 20kHz

Frequency Range (-10dB)

52Hz – 20kHz

Sensitivity

90dB (SPL 1W/1M)

Maximum SPL

115dB

Coverage

120°

Nominal Impedance

8 ohms (transformer bypass)

Crossover Frequency

3.3kHz

Rec. Highpass Frequency

60Hz

Power Handling

75W Cont. Prog. / 300W Peak

HF Transducer

1 in. (25.4mm)

LF Transducer

6.5 in. (165.1mm)

Passive Radiator

6.5 in. (165.1mm)

Transformer Taps

70V: 7.5, 15, 30, or 60W

100V: 15, 30, or 60W

Bypass: 8 ohms nominal

Connectors

4 pin phoenix style terminals

Enclosure Material

Baffle: UL 94V-O rated ABS

Backcan: Zinc plated steel

Grille

Perforated powdercoated steel with safety tether

Mounting System

Integrated toggle anchors

Support Hardware

Cutout Template, Paint Shield

Dimensions

465.4mm x 256.4mm x 100.3mm (18.32” x 10.09” x 3.95”)

Net Weight (each)

5.8 kg (12.7 lb.)