JBL CONTROL 28-1L-WH Low Impedance 8 Ohm Background Speaker White Pair

JBL CONTROL 28-1L-WH | Low Impedance 8 Ohm Background Speaker White Pair

The JBL Control 28-1L-WH is the ultimate solution for crystal-clear audio in any environment. This pair of low impedance, 8-ohm background speakers is designed to meet the high demands of both indoor and outdoor applications. With a two-way 8'' speaker system, the JBL Control 28-1L-WH delivers rich sonic character and wide coverage that remains consistent across diverse installations. Whether you're outfitting a retail store, a bustling restaurant, a serene health club, or a vibrant theme park, these speakers ensure top-quality high-output audio for both foreground and background music, as well as paging systems.

Engineered with a contemporary, high-design look, these speakers effortlessly blend into any setting while providing unmatched performance. The Control 28-1L-WH includes built-in InvisiBall mounting hardware for versatile and seamless installation. Additionally, its weather-resistant enclosure and transducers make it ideal for challenging environments. From educational facilities to hospitality settings, music cafes to leisure venues, the JBL Control 28-1L-WH ensures your audio needs are met with excellence.

Key Features

• 8'' woofer with woven fiberglass cone
• 1'' PEI diaphragm tweeter with fluid cooling
• Contemporary, high-design appearance
• Built-in InvisiBall mounting hardware with optional U-bracket
• Weather-resistant enclosure and transducers
• Wide 100 degrees x 100 degrees coverage
• 120 Watt power handling (240 Watt program)
• High fidelity sound character
• Frequency response of 45 Hz - 20 kHz

Specifications

• Frequency Range (-10 dB): 45 Hz to 20 kHz
• Frequency Response (+/-3 dB): 62 Hz - 16 kHz
• Power Rating: 240 W Continuous Program (2 hrs)
• Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peak
• Maximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)
• Sensitivity: 91 dB, 1W/1m (ave. 100 Hz - 10 kHz)
• Coverage Angle: 100 degrees x 100 degrees
• Directivity Factor (Q): 7.3 (averaged 1kHz - 16kHz)
• Nominal Impedance: 8 ohms
• Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shaping
• Recommended Protective High-Pass: 45 Hz high-pass (24 dB/oct)
• Low Frequency Driver: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
• High Frequency Driver: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.
• Enclosure Material: High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
• Grille: Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing.
• Installation: InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
• Environmental: IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments.
• Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6 #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
• Agency Rating: ROHS-compliant
• Colors: Black (RAL9004) or white (-WH, RAL9016)
• Dimensions (H x W x D): 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
• Net Weight: 6.2 kg (13.5 lbs)
• Shipping Weight: 13.4 kg (29.5 lbs) pair-packed (for 2 speakers)

Package Contents

• Pair of JBL Control 28-1L-WH speakers
• InvisiBall wall-mounting system
• 6 mm x 180 mm hex key