Shure A15HP | In-Line High Pass Filter

The Shure A15HP In-Line High Pass Filter is an essential accessory for any audio professional looking to enhance their sound quality by eliminating unwanted low-frequency noise. This high-performance filter is designed to pass mid and high frequencies while effectively reducing those pesky low frequencies that can interfere with your audio clarity. Whether you're dealing with the 60Hz hum from AC power lines, low-frequency rumbles caused by wind noise, or the myriad stage and floor noises transmitted to a microphone through its stand, the Shure A15HP has got you covered. With its impressive ability to reduce low frequencies by 12dB per octave below 100 Hz, this filter ensures that your recordings and live sound setups are crystal clear and free from unwanted noise.

The A15HP is particularly effective when connected to the microphone input on a typical mixer with 800 ohms impedance or higher. Its slender, in-line XLR configuration boasts a female XLR to male XLR connector, making it easy to integrate into your existing audio setup. The device's design ensures that it not only performs exceptionally well but also blends seamlessly into your professional gear with a full magnetic shield, steel case, and sleek gray enamel finish.

Ideal for a range of applications from studio recording to live sound engineering, the Shure A15HP In-Line High Pass Filter is a reliable and invaluable tool for achieving superior audio quality. Whether you're a seasoned audio engineer or a budding enthusiast, this high pass filter is an investment in perfect sound.

Key Features

• Provides low-end roll-off of 12 dB per octave below 100 Hz
• Reduces unwanted low-end rumble in microphone signals
• Slender, in-line XLR (F) to XLR (M) configuration

Specifications

• Frequency Response: Flat above roll-off point; -0.5 dB maximum at 1 kHz
• Impedance: Designed for 150 ohm rated microphones and inputs
• Distortion: 2.5% maximum (100 mV input, open circuit output)
• Connectors: Input: XLR female, Output: XLR male
• Case: Full magnetic shield, steel with gray enamel finish
• Dimensions: 19 mm (3/4 in.) diameter; 114 mm (4 1/2 in.) long
• Weight: 0.25 lb

Package Contents

• Shure A15HP In-Line High Pass Filter
• Product Documentation