Cobalt Digital 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync openGear Card

Cobalt Digital 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync openGear Card

The Cobalt Digital 9904-UDX-4K UHD Up/Down/Cross Converter/Frame Sync/Embed/De-Embed Audio Processor is Cobalt's next generation of advanced scaler/frame synchronizers for the openGear platform.

The 9904-UDX-4K upconverts 12G/6G/3G/HD/SD to either UHD1 3840x2160 Square Division Multiplex (SDM) or Two-Sample Interleave (2SI) quad 3G-SDI based formats, or can output ST 2082 12G-SDI for single-wire 4K transport. With both 12G-SDI and quad 3G-SDI inputs, the 9904-UDX-4K can down convert 12G and quad UHD. The 9904-UDX-4K provides an HDMI 2.0 output for economical 4K video monitoring. The 9904-UDX-4K offers numerous options, including SDR-to-HDR conversion and color correction.

The 9904-UDX-4K-IP model offers the same functionality as the Cobalt Digital 9904-UDX-4K SDI-based model, but also provides dual 10GigE ports providing support for the emerging uncompressed video/audio/data over IP standards.

The Cobalt Digital 9904-UDX-4K-DSP model provides the same functionality as the 9904-UDX-4K model, and additionally also offers a DSP-based platform that supports multiple audio DSP options, including Dolby Real-Time Loudness Leveling automatic loudness processing, Dolby E/D/D+ encode/decode, and Linear Acoustic UPMAX automatic upmixing. Embedded audio and metadata are properly delayed and re-embedded to match any video processing delay, with full adjustment available for audio/video offset.

The high-density openGear design allows for up to five 9904-UDX-4K to be installed in one 2RU openGear frame. Card control/monitoring is available via DashBoard user interface, integrated HTML5 web interface, SNMP, or Cobalt's RESTful-based Reflex protocol.

Key Features

• High-density openGear comprehensive UHD UDX solution
• Full up/down conversion between HD/3G, ST 2082 12G-SDI single-wire, and SDM/2SI quad 3G-SDI based formats, with ST 2082
• 12G-SDI single-wire and quad 3G UHD available at both input and output
• Supports Square Division Multiplex (SDM) and Two-Sample Interleave (2SI) quad UHD formats
• 12G-SDI and quad 3G frame sync and user delay
• Supports SNMP and Cobalt's Reflex (JSON) Protocols
• Full embedded audio processing with user delay offset and AES I/O
• Noise Reduction and Detail Enhancement provide image quality optimization
• Remote control/monitoring via Dashboard software, OGCP-9000 remote control panels, integrated HTML5 web interface, SNMP, or
• Cobalt's RESTful-based Reflex protocol
• Five-year warranty

Technical Specifications

12G/6G/3G/HD/SD-SDI Input/Outputs
(6) 75O inputs (max)
(8) 75O outputs (max)
SDI Formats Supported
SMPTE ST2082-1,10, 424M, 292M, SMPTE 259M-C. All inputs/outputs 12G compliant and SDQS/2SI quad 3G compliant.
Return Loss
> 15 dB up to 1.485 GHz
> 10 dB up to 3 GHz
> 7 dB up to 6 GHz
> 5 dB up to 12 GHz
Input Cable Length
60m Belden 1694A cable at 11.88 Gbps
120m Belden 1694A cable at 2.97 Gbps
240m Belden 1694A cable at 1.485 Gbps
400m Belden 1694A cable at 270 Mbps
Output Signal Level
800 mV ±10%
DC Offset
0 V ± 50 mV
Rise and Fall Time @ 11.88 Gbps
< 45 ps
Alignment Jitter (12G/3G/HD/SD)
< 0.3/0.3/0.2/0.2 UI
Frame Sync Audio/VIdeo Delay
Max offset
20 frames
Latency (min)
1 frame
User Audio Delay Offset from Video
Bulk delay control
-33 msec to +3000 msec.
Per-channel delay controls
-800 msec to +800 msec
HDMI Output
HDMI 2.0 Output; type A standard connector
Frame Reference Input
(2) reference from frame bus. SMPTE 170M/318M “Black Burst”, SMPTE 274M/296M “Tri-Level”
Frame Loading (Max. recommended number of 9904 cards supported (by Frame Model)
OG3 Frame
(5) cards
HPF-9000 Frame
(5) cards
oGx Frame
(7) cards
Note
In all cases, it is recommended to leave a 1RU gap above the frame and set frame Network Controller Card to run the frame cooling fans at full (max.) speed.