Allen & Heath M-DL-AOUT-A 8-Channel Analog Line Output Module for DX32

Send eight balanced line feeds from wherever a DX32 expander is placed. The M-DL-AOUT-A analog output module provides eight line level XLR outputs for amplifiers, powered loudspeakers, monitors, recorders or broadcast feeds.

Outputs run at a nominal +4dBu with a maximum level of +22dBu, and each one is relay protected to prevent thumps when the system is powered on or off.

Because the DX32 is modular, this card can occupy any of the four 8-channel slots alongside analog input, AES3 digital and PRIME modules. To install, switch the expander off, remove the blank panel, slide the module into the mating connector and tighten the two thumb screws.

Features

• 8 line level, balanced XLR outputs
• Relay protected to prevent power on/off thumps
• +4dBu nominal level, +22dBu maximum
• Fits any of the 4 slots in a DX32 expander
• Mix and match with analog input, AES3 and PRIME modules
• Works in DX32 expanders used with dLive, Avantis, SQ, AHM and 96kHz Qu systems

Technical Specifications

• Module Type: 8-channel analog output
• Connectors: 8 XLR, balanced, relay protected
• Output Impedance: <75 ohm
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise: -92dBu (muted, 20Hz-20kHz)
• DAC: 24-bit Delta-Sigma
• Host: Allen & Heath DX32 modular expander (4 module slots)
• Sample Rate: 96kHz system
• Manufacturer Part Number: AH-M-DL-AOUT-A
• UPC: 6938122244016

What's Included