Audio-Technica ATND1061DAN Beamforming Microphone with Dante

The Audio-Technica ATND1061DAN is a cutting-edge beamforming ceiling array microphone designed for seamless integration into modern conference rooms, boardrooms, and meeting spaces of all sizes. Its sleek, low-profile design—comparable in size to a wireless access point—allows for discreet installation, either flush-mounted or surface-mounted on various ceiling types, including drop ceilings and open architecture environments. This microphone ensures clear, natural audio capture from every participant in the room, significantly reducing distracting environmental noises.

Equipped with advanced onboard digital signal processing (DSP), the ATND1061DAN offers features such as automix, acoustic echo cancellation, noise reduction, automatic gain control, and a 4-band EQ. These features work in tandem to deliver superior audio quality. The user-friendly Digital Microphone Manager software facilitates easy configuration of single or multiple microphones, allowing for up to six individual output channels and 32 user-defined microphone pickup zones. This flexibility ensures optimal coverage for a wide variety of room sizes and meeting types.

Key Features:

• Ideal for conference rooms, boardrooms, and meeting spaces of all sizes
• Advanced onboard DSP: automix, acoustic echo cancellation, noise reduction, automatic gain control, and 4-band EQ
• User-friendly Digital Microphone Manager software for easy configuration
• Six individual output channels with up to 32 user-defined microphone pickup zones
• Output Channel 1 supports up to 16 user-defined Coverage Zones for nonpriority participants
• Output Channels 2–6 support up to 16 user-defined Priority Zones for known participant locations
• Proprietary voice activity detection (VAD) technology distinguishes between speech and unwanted noises
• Configurable exclusion zones to avoid known sources of unwanted noise
• Dual network ports with Single Cable and Split modes for Dante audio and microphone control data
• Mounts flush or on the surface of various ceiling types; compatible with VESA mounts
• UL 2043 compliant for installation in plenum spaces
• Low-reflective white finish blends with most ceiling tiles
• Powered via network PoE (IEEE 802.3af Class 0)

Technical Specifications:

Power Requirement: PoE (IEEE 802.3af Class 0)
Power Consumption: Max. 7 W
Operating Temperature Range: 0°C to 40°C (32°F to 104°F)
Operating Humidity Range: 25% to 85% (Non-condensing)
Dimensions: 227.5 mm (9.0") × 227.5 mm (9.0") × 30 mm (1.2") (W × D × H)
Weight: 1,250 g (44 oz)
Plenum Rating: UL 2043
Beam Width: 90°
Polar Pattern: Beam pattern
Frequency Response: 60 Hz to 18,000 Hz
Sensitivity: -8 dBFS (1 kHz, 94 dBSPL)
Dynamic Range: 89 dB (A-weighted)
Signal-to-Noise Ratio: 61.5 dB (A-weighted)
Self-Noise: 25 dBSPL (A-weighted)
Maximum Input Sound Level: 102 dBSPL
Analog Audio Frequency Response: 20 Hz to 20 kHz (+1.0/-2.0 dB)
Analog Audio Dynamic Range: 100 dB (A-weighted)
Analog Audio Signal-to-Noise Ratio: 80 dB (A-weighted)
Headroom: 20 dB
Residual Noise: -75.8 dBu (A-weighted)
Total Harmonic Distortion (T.H.D.): <0.1% (1 kHz, unity)
Analog Input: MIC Maximum: -30 dBu; MIC Unity: -50 dBu; LINE Maximum: +12.2 dBu; LINE Unity: -10 dBV (Switchable)
Analog Output: OUTPUT Maximum: +19.2 dBu; OUTPUT Unity: +4 dBu / -10 dBV / -33 dBV (Switchable)
Network: Dante: 1 Gbps; IP Control: 100 Mbps
Digital Audio: Sampling Rate: 48 kHz; Bit Depth: 24-bit
Latency: Microphone (CH1 to CH6): 18 ms; Auto Mix CH in voice lift mode: 33 ms; Auto Mix CH in AEC mode: 50 ms; Dante: Min. 250 µs, Max. 5 ms
I/O Connectors: Network/Dante: RJ-45; Analog Input: Euroblock 3-pin; Analog Output: Euroblock 3-pin; GPI: Euroblock 3-pin
Phantom Power: Analog Input: 12 V

Package Contents:

• Beamforming Ceiling Array Microphone ATND1061
• IR Remote Controller
• Surface Mount Adapter
• 4 × Screw (M4 × 50 mm)
• Flush Mount Adapter
• Flush Mount Cover
• 12 × Screw (M4 × 10 mm)
• Hole Cover
• 4 × Nut
• 2 × Snap Bushing
• 2 × Tile Bridge A
• 2 × Tile Bridge B
• 4 × Tile Bridge C
• Seismic Cable
• Zip Tie
• Safety Belt
• 3 × Euroblock Connector
• Installation Template