Audio-Technica U853PMU UniLine Condenser Hanging Microphone, Black

Featuring Audio-Technica’s UniLine line-cardioid element, the U853PMU condenser hanging microphone comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone also offers UniGuard innovations that deliver unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.

Key Features

• Designed for suspension over choirs, instrumental groups and theater stages
• Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
• UniLine polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Low-profile design with low-reflectance finish for minimum visibility

Technical Specifications

ELEMENT
Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN
Line Cardioid
FREQUENCY RESPONSE
30-20,000 Hz
LOW FREQUENCY ROLL-OFF
80 Hz, 18 dB/octave
OPEN CIRCUIt'sENSITIVITY-
35 dB (17.7 mV) re 1V at 1 Pa
IMPEDANCE
200 ohms
MAXIMUM INPUT SOUND LEVEL
124 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
102 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
72 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS
11-52V DC, 4 mA typical
SWITCHES
Flat, roll-off;
0 dB/+10 dB gain setting
WEIGHT (MICROPHONE)
1.1 oz (30 g)
WEIGHT (POWER MODULE)
3.4 oz (97 g)
DIMENSIONS (MICROPHONE)
6.14" (156.0 mm) long,
0.48" (12.2 mm) diameter
DIMENSIONS (POWER MODULE)
2.80" (71.0 mm) W x
4.55" (115.5 mm) H x
1.42" (36.0 mm) D
OUTPUT CONNECTOR (POWER MODULE)
Screw terminals
CABLE
25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
OPTIONAL INTERCHANGEABLE ELEMENTS
UE-C cardioid (120°);
UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
ACCESSORIES FURNISHED
AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter
AUDIO-TECHNICA CASE STYLE
M32