Free shipping on most orders above $99* Details

Same-day Shipping for most orders before 10AM PST

Trusted by Professionals Since 1991

Clear-Com FSE-BASE FreeSpeak Edge IP Base Station

Clear-Com | SKU: CLE-FSEBASE
$10,92000

Free Shipping

Estimated Shipping Widget will be displayed here!

Condition: New


Clear-Com FSE-BASE FreeSpeak Edge IP Base Station

The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks.

*Note
A 1.9 GHz beltpack cannot roam between and E1 1.9 GHz transceiver and an IP 1.9 GHz transceiver. Beltpacks on each system can communicate through the base station.

Key Features

  • Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
  • Supports up to 100 channels
    Base Station
  • Standard 1 rack unit (RU) device
  • High quality 12kHz audio to FS Edge beltpacks
  • 2 large full-color touch screen TFT displays
  • 4 rotary encoders for gain and menu operation
  • Headset connection
  • Stage Announce and Prog. Audio cable included
  • Functions as PTP Leader Clock
    Connectivity
  • Wireless 5GHz Edge transceivers and beltpacks
  • Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks
  • Dante enabled audio devices
  • AES67 devices via Dante controller
  • 4-wire ports (8 ports RJ45)
  • 2-wire ports (4 XLR-3F)
  • GPIO (D-type 9 pin)
  • LAN - 2 x RJ45, 2 x SFP
    Configuration
  • CCM browser-based configuration tool
  • Direct management with encoders and display

Technical Specifications

Beltpacks per Base Station
16 BPs (FSII or FSE)
Transceivers/Antennas Supported by Base
6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4GHz)

Headset Microphone Input
Input Type
Dynamic /Electret - Selectable
Frequency Response
Headset Mic - Partyline: 200Hz - 12kHz + 3dBu
Frequency Response
Headset Mic - Line Out: 200Hz - 20kHz + 3dBu
Mic Limiter Threshold
-50dBu +/-3dB
Mic Limiter Range
>= 20dB
Max Input Level
-25dBu
Input Level
-60dBu nominal; -25dBu MAX
Headset Mic Voltage
5V (Electret selectable)

Headset Output
Load Impedance
> 32 OHM
Output Impedance
33 OHM
Max Output Level before Distortion
> 13dBu
Total Harmonic Distortion (THD)
< 0.1% THD at 1kHz
Headset Mic - Partyline
-78dBu (Clear-Com mode)
Headset Mic - Line Out
-60dBu
Frequency Response
Partyline - Headset Out: 200Hz - 10kHz + 3dBu

Audio/Radio
4-wire I/O
Output Impedance >10k OHM, Input Impedance 200 OHM + 10%, transformer isolated balanced input and output.
4-wire Operating Levels
0dBu Nominal, 18dBu headroom
2-wire I/O
Selectable RTS or Clear-Com mode, Software controlled auto-null, null depth >60dB at 1kHz
2-wire Operating Levels
-18dBu nominal (Clear-Com Mode), -12dBu nominal (RTS Mode), Headroom 18dB
Freespeak Edge Beltpack
200Hz - 12kHz
Freespeak II Beltpack
200Hz - 7.1kHz

Partyline I/O
2W Power On/Off
A/B, C/D paired- software controlled
2W Output Voltage
25 - 28V DC, 560 mA per pair (A/B or C/D)
2W Impedance
>10k OHM
2W Frequency Response
200 to 12kHz. +/-3dB
2W Total Harmonic Distortion (THD)
< 0.1% THD at 1 kHz

Relay Contacts or GPIO
Connector Type
2 x DB9
Relay Contact Type
SPDT
Relay Quantity
4
Relay Contact Voltage Rating
30V DC
Relay Contact Current Rating
1A
Input Type
Opto-Isolated
Input Quantity
2
Input Voltage Range
4 - 30 volts DC or AC
Input Current
>=1.2mA required

Connectors
4-wire I/O
(8) RJ45
2-wire I/O
(4) XLR-3F
Program Input
XLR-3M, provided using cable assembly CAB-RJ45-PGM-SA
Stage Announce Output
XLR-3F, provided using cable assembly CAB-RJ45-PGM-SA
Headset
Freespeak Edge Base: 4-pin XLR-M, auto headset detect
USB
USB type A Receptacle
Number of E1 antenna ports
2 x RJ45, 2 x Fiber (2 active at any time)
DECT Radio frequency sync
Rear RJ45 input and output RF sync connectors

Indicators and Function
Displays: (2) 480 x 128 color TFT LED Touch Screen displays
Front Panel Indicators & Function:
(2) Power Supply Status LEDs
(1) Status LED (Edge)
(1) Three Color Level Control LED Array
Power:
AC Mains input: 100-240V AC, 50-60Hz, 160W Max, IEC60320 C14 inlet.
DC Low Voltage Input: 12V DC +/- 5%, 12A
External AC/DC Power Supply (453G020-1 Supplied)
Input: 100-240V AC, 50-60Hz, 2.2A Max, IEC60320 C14 inlet.
Output: 12V DC +/- 5%, 12.5A
Environmental
IP53 water and dust resistance
Operating: 32 to 113F (0 to 45C)
Storage: 86 to 158F (30 to 70C)
Humidity: 20-90% Non-Condensing
Dimensions
1RU
19 x 1.72 x 13.929in (WxHxL)
(43.6 x 482.6 x 353.8mm)
Depth: 260mm
Weight
7.25lbs (3.29kg)

Network Specifications
AoIP Interfaces
Protocols: RTSP/SAP, AES67, Dante
Audio Sampling
24 bit Linear 48KHz
IP Addressing
Static, DHCP
Network Compatibility
Layer 2 & 3 LAN only
Quality of Service
DiffServ RFC2474
IGMP
On (AoIP)
Multicast
On (AoIP)
Network Timing
PTPv2 (AoIP) / PTP v1 (Dante)
Minimum Network Bandwidth Required
Perduplex Connection
1 x FS II IPT bandwidth usage: ~7 Mbps.
1 x FS Edge IPT: ~ 9.6 Mbps
Network Protocols
Ethernet IPv4 Unicast Audio and Control
mDNS-Multicast Device Discovery

Network Ports
Unicast:
Port 80 TCP-Web Interface, System Management, Expansion
Port 443 for HTTPS
Port 6001 UDP-AES67 Data
Port 15000 - 15256 UDP - AES67 Audio
Multicast
Port 5353 UDP-mDNS, Names, Discovery, Linking, Expansion, Dante (through various ports)
Network Jitter Tolerance
< 1us required for RF Syncing of Transceivers
Recommended Ethernet Switches
Managed Ethernet Switch - Layer 3
100/1000 Base-T ports for endpoints
1000 Base IP Trunks between switches
QoS Configuration
Energy Efficient Ethernet bypass option
IGMP Snooping bypass option

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Clear-Com

Clear-Com FSE-BASE FreeSpeak Edge IP Base Station

$10,92000

Free Shipping

Clear-Com FSE-BASE FreeSpeak Edge IP Base Station

The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks.

*Note
A 1.9 GHz beltpack cannot roam between and E1 1.9 GHz transceiver and an IP 1.9 GHz transceiver. Beltpacks on each system can communicate through the base station.

Key Features

Technical Specifications

Beltpacks per Base Station
16 BPs (FSII or FSE)
Transceivers/Antennas Supported by Base
6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4GHz)

Headset Microphone Input
Input Type
Dynamic /Electret - Selectable
Frequency Response
Headset Mic - Partyline: 200Hz - 12kHz + 3dBu
Frequency Response
Headset Mic - Line Out: 200Hz - 20kHz + 3dBu
Mic Limiter Threshold
-50dBu +/-3dB
Mic Limiter Range
>= 20dB
Max Input Level
-25dBu
Input Level
-60dBu nominal; -25dBu MAX
Headset Mic Voltage
5V (Electret selectable)

Headset Output
Load Impedance
> 32 OHM
Output Impedance
33 OHM
Max Output Level before Distortion
> 13dBu
Total Harmonic Distortion (THD)
< 0.1% THD at 1kHz
Headset Mic - Partyline
-78dBu (Clear-Com mode)
Headset Mic - Line Out
-60dBu
Frequency Response
Partyline - Headset Out: 200Hz - 10kHz + 3dBu

Audio/Radio
4-wire I/O
Output Impedance >10k OHM, Input Impedance 200 OHM + 10%, transformer isolated balanced input and output.
4-wire Operating Levels
0dBu Nominal, 18dBu headroom
2-wire I/O
Selectable RTS or Clear-Com mode, Software controlled auto-null, null depth >60dB at 1kHz
2-wire Operating Levels
-18dBu nominal (Clear-Com Mode), -12dBu nominal (RTS Mode), Headroom 18dB
Freespeak Edge Beltpack
200Hz - 12kHz
Freespeak II Beltpack
200Hz - 7.1kHz

Partyline I/O
2W Power On/Off
A/B, C/D paired- software controlled
2W Output Voltage
25 - 28V DC, 560 mA per pair (A/B or C/D)
2W Impedance
>10k OHM
2W Frequency Response
200 to 12kHz. +/-3dB
2W Total Harmonic Distortion (THD)
< 0.1% THD at 1 kHz

Relay Contacts or GPIO
Connector Type
2 x DB9
Relay Contact Type
SPDT
Relay Quantity
4
Relay Contact Voltage Rating
30V DC
Relay Contact Current Rating
1A
Input Type
Opto-Isolated
Input Quantity
2
Input Voltage Range
4 - 30 volts DC or AC
Input Current
>=1.2mA required

Connectors
4-wire I/O
(8) RJ45
2-wire I/O
(4) XLR-3F
Program Input
XLR-3M, provided using cable assembly CAB-RJ45-PGM-SA
Stage Announce Output
XLR-3F, provided using cable assembly CAB-RJ45-PGM-SA
Headset
Freespeak Edge Base: 4-pin XLR-M, auto headset detect
USB
USB type A Receptacle
Number of E1 antenna ports
2 x RJ45, 2 x Fiber (2 active at any time)
DECT Radio frequency sync
Rear RJ45 input and output RF sync connectors

Indicators and Function
Displays: (2) 480 x 128 color TFT LED Touch Screen displays
Front Panel Indicators & Function:
(2) Power Supply Status LEDs
(1) Status LED (Edge)
(1) Three Color Level Control LED Array
Power:
AC Mains input: 100-240V AC, 50-60Hz, 160W Max, IEC60320 C14 inlet.
DC Low Voltage Input: 12V DC +/- 5%, 12A
External AC/DC Power Supply (453G020-1 Supplied)
Input: 100-240V AC, 50-60Hz, 2.2A Max, IEC60320 C14 inlet.
Output: 12V DC +/- 5%, 12.5A
Environmental
IP53 water and dust resistance
Operating: 32 to 113F (0 to 45C)
Storage: 86 to 158F (30 to 70C)
Humidity: 20-90% Non-Condensing
Dimensions
1RU
19 x 1.72 x 13.929in (WxHxL)
(43.6 x 482.6 x 353.8mm)
Depth: 260mm
Weight
7.25lbs (3.29kg)

Network Specifications
AoIP Interfaces
Protocols: RTSP/SAP, AES67, Dante
Audio Sampling
24 bit Linear 48KHz
IP Addressing
Static, DHCP
Network Compatibility
Layer 2 & 3 LAN only
Quality of Service
DiffServ RFC2474
IGMP
On (AoIP)
Multicast
On (AoIP)
Network Timing
PTPv2 (AoIP) / PTP v1 (Dante)
Minimum Network Bandwidth Required
Perduplex Connection
1 x FS II IPT bandwidth usage: ~7 Mbps.
1 x FS Edge IPT: ~ 9.6 Mbps
Network Protocols
Ethernet IPv4 Unicast Audio and Control
mDNS-Multicast Device Discovery

Network Ports
Unicast:
Port 80 TCP-Web Interface, System Management, Expansion
Port 443 for HTTPS
Port 6001 UDP-AES67 Data
Port 15000 - 15256 UDP - AES67 Audio
Multicast
Port 5353 UDP-mDNS, Names, Discovery, Linking, Expansion, Dante (through various ports)
Network Jitter Tolerance
< 1us required for RF Syncing of Transceivers
Recommended Ethernet Switches
Managed Ethernet Switch - Layer 3
100/1000 Base-T ports for endpoints
1000 Base IP Trunks between switches
QoS Configuration
Energy Efficient Ethernet bypass option
IGMP Snooping bypass option

View product