DPA 4011-DF-G-B01-015 4011 8-Inch Full Gooseneck Microphone, XLR, Black

Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources.

A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.

Due to its modular nature, the 4011 Cardioid Microphone Boom can be combined with different lengths of podium booms - 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) make a high-quality stage voice mic together with our dedicated accessories.

4011-DF-G-B01-120 (4011F120): 4011 Cardioid Mic, Black, XLR, 122 cm (48 in) Boom, top and bottom Gooseneck
4011-DF-G-B01-015 (4011F15): 4011 Cardioid Mic, Black, XLR, 20 cm (8 in) Boom, full Gooseneck
4011-DF-G-B01-030 (4011F30): 4011 Cardioid Mic, Black, XLR, 32 cm (13 in) Boom, top and bottom Gooseneck
4011-DF-G-B01-045 (4011F45): 4011 Cardioid Mic, Black, XLR, 47 cm (18 in) Boom, top and bottom Gooseneck
4011-DF-G-B01-075 (4011F75): 4011 Cardioid Mic, Black, XLR, 77 cm (30 in) Boom, top and bottom Gooseneck

Technical Specifications

Directional pattern
Cardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency response
20 Hz - 20 kHz
Effective frequency range, +/-2 dB, at 30 cm (11.8 in)
40 Hz - 20 kHz
Sensitivity, nominal, +/-2 dB at 1 kHz
10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 18 dB(A) re. 20 Pa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 25 dB
Distortion, THD < 1%
136 dB SPL RMS, 139 dB SPL peak
Dynamic range
Typ. 121 dB
Max. SPL, THD 10%
144 dB SPL peak
Rated output impedance
100 OHM
Minimum load impedance
2 k OHM
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing
Common mode rejection ratio (CMRR)
> 40 dB
Power supply (for full performance)
P48 (Phantom Power)
Current consumption
3.5 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Microphone diameter
19 mm (0.75 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
Maximum output voltage, RMS
2.2 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40C to 45C (-40F to 113F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
+/-1 dB
Phase deviation for kit
< 10