DPA d:fine CORE 4066 Omni Headset Mic, Beige, TA4F Mini-XLR
DPA d:fine CORE 4066 Omni Headset Mic, Beige, TA4F Mini-XLR
Free Shipping
DPA d:fine CORE 4066 Omni Headset Mic, Beige, TA4F Mini-XLR
The d:fine 4066 Omnidirectional Headset Microphone offers clean and transparent sound quality with lots of headroom. For years, this has been the chosen headset mic for broadcasters as well as theaters on Broadway and London's West End. This is due to its pristine sound and durability
The headset construction is unique. You can detach the mic boom from the headset mount to switch it to either the left or right side and then reattach it. Humidity, often an issue in theatrical applications is not a problem. This microphone is constructed with a double-vent protection system and a drop stopper on the microphone boom. Also, the materials inside the mic are water resistant. These design elements make it very difficult for the microphone to fail due to humidity. In addition, the headset surface is matte-gold plated and the ear hooks are covered with a silicone hose.
The microphoneās sensitivity is 6 mV/Pa. This matches the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly, the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs.
Technical Specifications
Directional Pattern
Omnidirectional
Principle of Operation
Pressure
Cartridge Type
Pre-polarized condenser
Frequency Range
20 Hz - 20 kHz
Frequency Range, Ā±2 dB
Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, Nominal, Ā±3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent Noise Level, A-Weighted
Typ. 26 dB(A) re. 20 ĀµPa (max. 28 dB(A))
Equivalent Noise Level, ITU-R BS.468-4
Typ. 38 dB (max. 40 dB)
S/N Ratio (A-Weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 68 dB(A)
Total Harmonic Distortion (THD) CORE
< 1% THD up to 137 dB SPL peak
Dynamic Range CORE
Typ. 111 dB
Max. SPL, Peak Before Clipping
144 dB
Output Impedance
30 - 40 ohm
Cable Drive Capability
Up to 300 m (984 ft)
Power Supply (for Full Performance)
For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power Ā±4 V for full performance
Weight
14 g (0.5 oz)
Microphone Diameter
5.4 mm (0.21 in)
Cable Length
1.2 m (3.9 ft)
Cable Diameter
1.6 mm (0.06 in)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
