DPA d:fine CORE 4266 Omni Flex Earset Mic, 110 mm Boom, Beige, 3-pin LEMO
DPA d:fine CORE 4266 Omni Flex Earset Mic, 110 mm Boom, Beige, 3-pi...
Free Shipping
DPA d:fine CORE 4266 Omni Flex Earset Mic, 110 mm Boom, Beige, 3-pin LEMO
The d:fine 66 Headset Microphone combines the legendary sound of the 4066 Omnidirectional Capsule with the lightweight and flexible d:fine Headset system. This condenser mic is easy and fast to adjust and it offers clean and transparent sound quality with lots of headroom.
Like all of the microphones in the range, the d:fine 66 Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities. Users can both speak and sing into the mic with no hint of distortion. The microphone capsule is also optimized for low distortion as well as humidity resistance.
The d:fine 66 Omnidirectional Headset Microphone is available with single- or dual-ear mounts. Single-ear mount variants are the quickest to put on and often the best choice when miking needs to be fast and easy. Dual-ear mount variants sit more securely around the head and are ideal for active performance situations.
Technical Specifications
Directional Pattern
Omnidirectional
Principle of Operation
Pressure
Cartridge Type
Pre-polarized condenser
Frequency Range
20 Hz - 20 kHz
Frequency Range, ±2 dB
Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, Nominal, ±3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent Noise Level, A-Weighted
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent Noise Level, ITU-R BS.468-4
Typ. 38 dB (max. 40 dB)
S/N Ratio (A-Weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 68 dB(A)
Total Harmonic Distortion (THD) CORE
< 1% THD up to 137 dB SPL peak
Dynamic Range CORE
Typ. 111 dB
Max. SPL, Peak Before Clipping
144 dB
Output Impedance
From MicroDot: 30 - 40 OHM. From DAD6001: 100 OHM
Cable Drive Capability
Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output Balance Principle
Signal balanced with DAD6001-BC XLR Adapter
Common Mode Rejection Ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power Supply (for Full Performance)
Min. 5 V to max. 50 V through DPA adapter for wireless systems
Current Consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Microphone Diameter
5.4 mm (0.21 in)
Microphone Length
12.7 mm (0.5 in)
Cable Length
1.25 m (4.1 ft)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
