EtherWAN EL200CB-2 10/100 to 100BASE-BX WDM Media Converter, TX1550/RX1310

The EtherWAN EL200CB-2 is the 1550 nm transmit / 1310 nm receive half of a single-strand fiber pair, converting a 10/100BASE-TX copper port to a 100BASE-BX WDM link of up to 2 km on multimode fiber through one SC connector.

Because the link runs both directions on one strand, the far end needs a converter with the opposite wavelengths: pair this unit with the EL200CA-2. DIP switches select store-and-forward or converter mode, Link Fault Pass Through, and full or half duplex on the copper and fiber ports. The copper port is Auto MDI/MDIX.

The aluminum-cased converter runs from the included 12VDC power adapter and can be wall mounted or installed in an EtherWAN EMC1600 chassis, sold separately. It is a commercial-grade unit for indoor use at 0 to 45 C.

Features

• 1x 10/100BASE-TX RJ45 port and 1x 100BASE-BX single-strand SC fiber port
• WDM over one multimode fiber: TX 1550 nm / RX 1310 nm, up to 2 km
• Link Fault Pass Through, DIP-switch selectable
• Store-and-forward or converter mode, DIP-switch selectable
• Full or half duplex selectable on both ports; Auto MDI/MDIX
• Wall mount or EMC1600 chassis (chassis sold separately)
• 12VDC power adapter included

Technical Specifications

• Ports: 1x 10/100BASE-TX (RJ45), 1x 100BASE-BX (single SC)
• Fiber: multimode, SC, single strand WDM
• Wavelength: TX 1550 nm / RX 1310 nm
• Distance: 2 km
• Standards: IEEE 802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3x
• Power input: 12VDC
• Power consumption: 1.92 W max (0.16 A at 12VDC)
• Casing: aluminum
• Dimensions: 80.3 x 109.2 x 23.8 mm (3.16 x 4.30 x 0.94 in)
• Weight: 0.15 kg (0.33 lb)
• Operating temperature: 0 to 45 C (32 to 113 F)
• Safety: UL 62368-1
• Emissions: CE Class A, FCC Part 15B Class A, VCCI Class A
• Pairs with: EL200CA-2
• Manufacturer Part Number: EL200CB-2

What's Included

• (1) EL200CB-2 media converter
• (1) 12VDC power adapter
• (1) Quick install guide