JBL AWC82 Compact Two Way Coaxial Loudspeaker Gray Each

8 inch 2-Way All-Weather Compact Co-axial Loudspeaker. 120 x 120 deg broadband control, co-ax driver with 200 mm (8 in) Kevlar-reinforced woofer and 25 mm (1 in) compression driver with high-temp polymer diaphragm. Excellent clarity with extended frequency response. 250 Watt power handling (1000 Watt peaks), 80 Hz - 20 kHz frequency range, overload HF protection, 200 Watt 70V/100V multi-tap or direct 8 ohm low-impedance. Sold and packed as each.

Key Features

• Highly weather-resistant IP56 rating
• Consistent 120 x 120 deg broadband pattern control
• 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil
• 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm
• Extraordinary clarity for speech, with extended frequency response for music.
• Advanced high-slope crossover network for constant coverage and smooth, natural midrange
• 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability
• high-power passive crossover network
• Overload protection
• 80 Hz - 20 kHz frequency response
• 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8 ohm low-impedance

Technical Specifications

Color
Gray
Frequency Range (-10 dB)
80 Hz - 20 kHz
Frequency Response (±3 dB)
100 Hz - 20 kHz
Coverage Pattern
120 x 120 deg
Directivity Factor (Q)
8.1 (1 k - 16 kHz)
Directivity Index (DI)
8.4 dB (1 k - 16 kHz)
Long-Term System Power Rating (IEC)
250 W 2 hrs
200 W 100 hrs
Sensitivity (2.83V @ 1m)
94 dB (Ave. 100 Hz - 20 kHz)
Maximum SPL
Direct 8 ohm: 118 dB (peaks of 124 dB)
200 W Tap: 117 dB
Crossover Network
1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order
low-pass to LF
Nominal Impedance
8 ohms
Transformer Taps
70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Low Frequency Driver
Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil
High Frequency Driver
25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling
HF Driver Protection
Minimum audibility SonicGuard HF overload protection
Enclosure
ABS with Glass enclosure, heavily braced
Attachment
Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel
Grille
Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing
Input Connection
CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16 inch) and 9.0 mm (0.36 inch)
Environmental
IP56 per IEC529, with a minimum 5 deg downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs)
Dimensions
300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland nut
359 mm (14.2 in) including bracket extending to back
Net Weight
9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight
14.1 kg (31.0 lb)
Included Accessories
U-bracket, matches loudspeaker color (gray), zinc-rich extrathick powder coated, steel