Juice Goose RP 100-15RX 15-Amp Surge Protector and Filtration

Surge Protection and Filtration - Juice Goose RX Series protection circuitry uses multiple components in a hybrid circuit to limit AC line surges to 10 volts between line and neutral and 0.50 volts (500 millivolts) on the ground line. Other performance features include a bi-directional high frequency filtration that reduces EMI and RFI interference and power interruption in case of high voltage or facilities wiring fault.

Power Meter - The two function meter reports in easy-to-read LED numerals the status of your power supply and consumption. Toggle between volts and amps with a convenient push button on the front of the chassis. Voltage is measured to the nearest 0.10 VAC. Amperage is measured to the nearest 0.10 amperes in a range from 0.20A to 25.0A.

USB Ports - One USB port is provided on the front and one on the back of the chassis. These five-volt DC connections are usable for utility lighting or powering accessories. Connect an inexpensive, flexible USB light fixture for lighting in the front or back of the rack. Both USB ports can also be used to charge accessories including an iPhone or iPad.

AC Power Receptacles - One AC outlet is located on the front. Nine are on the back. The rear outlets are rotated to accommodate wall warts and include extra generous spacing between four of them.

Power Input - RP 100-15A features a seven-foot, fourteen-gauge power cord with a NEMA 5-15P plug.

Tour Class Chassis - This professional grade, seven inch deep enclosure is formed from a single piece of cold rolled steel. Reinforced mounting brackets and a flush mount top complete a package that's been used to rack mount other products weighing over 200 pounds. The extra chassis depth allows easy access to the rear receptacles while mounted in a rack.

Two Amperage Options - For the fifteen-amp model specify RP 100-15RX. For the twenty-amp model specify RP 100-20RX.

Key Features

• Tested and proven circuitry limits voltage surge energy between line and neutral and also, on the ground. The RP-100RX provides protection against AC power surges as well as high frequency line noise and external wiring faults
• The two function meter reports in easy-to-read LED numerals the status of your power supply and consumption. Toggle between volts and amps with a convenient push button on the front of the chassis
• One USB port is provided on the front and one on the back of the chassis. These five-volt DC connections are usable for utility lighting or powering accessories
• One AC outlet is located on the front. Nine are on the back. The rear outlets are rotated to accommodate wall warts and include extra generous spacing between four of them
• RP 100-15A features a seven foot, fourteen gauge power cord with a NEMA 5-15P plug
• This professional grade, seven-inch-deep enclosure is formed from a single piece of cold rolled steel. Reinforced mounting brackets and a flush mount top complete a package that's been used to rack mount other products weighing over 200 pounds.

Technical Specifications

Chassis
16 gauge “unibody” steel with 11-gauge rack mount brackets
Dimensions
1.75”H x19”W x 7”D
Weight
12 lbs
Current Overload Protection
breaker/power switch on the front of the chassis
RP100-15RX
15 amps with a technical current rating of 12 amps
RP100-20RX
20 amps with a technical current rating of 16 amps
Power Input
Seven feet (7’), three conductor power cord
RP100-15RX
14/3 SJT with NEMA 5-15P
RP100-20RX
12/3 SJT with NEMA 5-20P
Power Output (Rotated to fit AC adapters) (All switched)
Front
One NEMA 5/15R (15 amp)
Rear RP100-15RX
Nine NEMA 5/15R (15 amp)
Rear RP100-20RX
Eight NEMA5-15R (15 amp), One NEMA5-20R (20 amp)
Input Voltage
120 VAC @ 60Hz
Monitor Features
Voltage
Nominal 120 VAC scale. Reports to nearest 0.10 volts
Amperage
From 0.25 to 25.0 amps. Reports to nearest 0.10 amps
Surge Protection
LED indicator on front panel
Warranty
Three years