Key Digital KD-IP922DEC-II 4K AV over IP System Decoder with PoE

Key Digital KD-IP922DEC-II 4K AV over IP System Decoder with PoE

Key Digital’s 4K AV over IP system may be scaled to fit any installation need. Add an Encoder per video source or Decoder per video display and use a verified network switch as the central point of this HDMI AV routing and distribution system. The Key Digital 4K AV over IP system is completely integrated, with Encoder and Decoder product options including video wall, control, audio pre-amp, app-ready user interface capabilities, and more.

Key Features

• AV Over IP: Utilizes a managed gigabit network switch to enable HDMI video distribution, matrix switching, and signal extension
• Mix and match system: Mix and match KD-IP822 and KD-IP922 encoders and decoders to optimize connectivity and overall price point
• Video Wall Processing: Encoder + Decoder systems create video walls with up to 16x16, 256 total maximum displays
• Control: 3 multi-function ports may be used as Compass Control Pro master controller, by IP control systems via KeyCode open API, or as a third-party control interface
• Key Digital App Ready: Network scan & detect populates pre-built GUI including optional image preview, finger drag video wall management, source and display control of popular devices via IR
• KDMS Pro Ready: PC software for unit & system setup and control UI with clean End-User mode option including optional image preview, mouse-drag video wall management, source and display control of popular devices via IR and PJ Link
• HDMI Pass-through: Tx unit HDMI Pass-through to connect local monitor, HDMI Audio systems
• Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog phoenix terminal to enable external audio connectivity with audio systems and amplifiers
• Audio Pre-Amp: Volume, muting, 3-band EQ, and lip-sync delay controllable on audio de-embed port
• USB 2.0: Routing follows AV source / display selection with maximum of 4 USB keyboard or mouse devices simultaneously routed to a single host computer / encoder. 1.5Mbps maximum bandwidth.
• Webcams not supported.
• 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit (10.2Gbps max bandwidth)
• 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
• Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4) into network switch or or point-to-point
• Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
• Redundant Power Connection: Added reliability for non-PoE integration
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• Latency: <40ms at 4K. Less at lower resolution
• Installation: Use KD-SMS16 to cleanly install up to twelve ENC/DEC units in rack
• RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
• Surround Audio: Support for Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, and DTS-HD Master Audio
• Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API
• HDMI and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:4:4
• EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder
• Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
• Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
• HDR (High Dynamic Range): HDR is achieved with AppleTV source at 4K/30 <4:2:2> 12bit deep color, enabling more life-like images through a greater range of luminance levels
• IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
• RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector

Technical Specifications

Inputs
1 TCP/IP
Outputs
1 HDMI, 3 Multifunction Control (IR, Bi-Directional RS-232, Trigger), 2 TCP/IP, 2 USB-A
DDC Signal (Data)
5 Volts p-p (TTL)
HDMI Video/Audio Signal
Input Video Signal: 1.2 Volts p-p
HDMI Connector
Type A, 19 Pin Female
Audio Connector
Balance/Unbalanced 6-Pin Phoenix, 3.5mm Stereo
RJ45 Connector
Shielded TCP/IP 1G/100 BaseT, PoE
Control Connectors
3-Pin Phoenix
Regulation
CE, RoHS, WEEE
Enclosure
Black Metal
Power Supply
12V/1A, 20W, desktop type
Product Dimensions
6.25” x 1.1” x 3.1”
Packaging Dimensions
9.8” x 4.5” x 3.35”
Product Weight
0.9 lb
Shipping Weight
1.5 lb
BTU
30.7 per hour
Operating Temperature
150 Degrees F (65.5 Degrees C)
Surface Temperature
104 Degrees F (40 Degrees C) at 77 Degrees F (room temperature)
ACCESSORIES
Power Supply
12V/1A, 20W, desktop type
USB Data Cable 6ft, A to Micro (qty 1)
3-pin phoenix terminal (qty 3)
IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal (qty 1)
IR Emitter with stripped wire. Stripe = IR Signal, Solid = Ground. Model KDIRE3501F1 (qty 1)
L-Bracket Mount (qty 2)
Screws for L-Bracket (qty 4)
Operation User Manual (qty 1)