MuxLab 500762-TX 1080p HDMI to H.264/H.265 Over IP Transmitter with PoE
Authorized Dealer
Free Shipping
Estimated Shipping Widget will be displayed here!
Orders placed between Monday - Friday before
1:00 PM PST will most likely ship out the same day. We work hard to process and ship your items quickly so you can start enjoying them as soon as possible.
Found a lower price? Contact us and we'll see if we can match it! Price match will only be applied to products sold and shipped by authorized retailers of the brand.
No restocking fee will be charged when you opt for store credit. Exclusions apply.
Condition: New
Description
MuxLab 500762-TX 1080p HDMI to H.264/H.265 Over IP Transmitter with PoE
The Muxlab MUX-500762-TX HDMI over IP H.264/H.265 PoE transmitter, when used in combination with the MUX-500762-RX (receiver, sold separately), allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems.
Key Features
- Receiver supports up to 4K @ 60Hz (4:4:4) video streams
- Receiver up-scales 1080p @ 60Hz video streams from Transmitter and other devices up to 4K @ 60Hz
- Transmitter supports up to 1080p @ 60Hz video
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of Transmitters & Receivers depending on network bandwidth
- Supports Multicast (LAN), and RTSP / RTMP / HLS (LAN & Internet)
- USB 3.0 port for storing and playback of local content from an external USB drive (RX)
- Supports SPDIF (TosLink) Audio Out (RX)
- 2CH audio insert (TX), and 2CH audio extract (RX)
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed remotely via Pro Digital Network Controller (500811)
Technical Specifications
Environment
HDMI 1.3a
Devices
Blu-Ray, Set Top Boxes, Media Players/Streamers, projectors, monitors, TVs, PCs, supporting HDMI.
Signal Protocol/Standard: HDMI 1.3a and HDCP 1.3
Video Bandwidth
225MHz
Network Bandwidth
30Mbps (max)
Protocols
Supports Multicast, RTSP, RTMP (H.264), HLS, FLV (H.264) & TS
Maximum Distance
Cat5e/6: 330ft (100m) from Ethernet Switch. Unlimited over the Internet
RJ45 Pin Configuration: RJ45 Link: Pin 1 ®, Pin 2 (T), Pin 3 ®, Pin 6 (T), Pin 4 ®, Pin 5 (T), Pin 7 ®, Pin 8 (T)
Power Source
This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
PoE
IEEE 802.3af
Power Consumption
4.5W
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity
Up to 95% non-condensing
Dimensions
4.4" x 3.6" x 1.0"
Weight
0.9lbs
Compliance Regulatory
FCC, CE, RoHS Flammability: 94V0
Warranty
3 years
