Panamax M8-AV-PRO Home Theater Power Management Device

AC power, telephone and coax lines can provide direct pathways for surges and spikes to enter and damage expensive audio/video equipment. M8-AV-PRO eliminates voltage irregularities & protects your AV system.

REDUCES CROSS-CONTAMINATION BETWEEN COMPONENTS
The M8-AV-PRO is designed to provide noise isolation between the two isolated outlet banks so that any noise created by an A/V component in one bank cannot contaminate the power to the equipment that is plugged into the other outlet bank.

MONITORS INCOMING LINE VOLTAGE
Panamax's patented AVM circuitry continuously monitors the incoming line voltage and disconnects your equipment in the event of an over voltage or undervoltage (brownout). Power is automatically reconnected when voltage returns to a safe level, eliminating service calls or system downtime

IMPROVES PICTURE AND SOUND QUALITY
The M8-AV-PRO's Power Cleaning and Premium Filtration eliminate common symptoms of contaminated power (including loss of detail, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Key Features

• PREMIUM FILTRATION
  Improves Picture and Sound. Provides clean power by filtering out noise common to household power.
• SURGE PROTECTION
  Exclusive Protect or Disconnect circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment
• COAX/SAT PROTECTION
  Protects equipment from electrical surges that travel over Cable, Satellite, and Antenna lines.
• 12 VOLT TRIGGER
  Allows source equipment to activate or deactivate outlets 5-8 on the M8-AV-PRO.
• TELEPHONE/LAN LINE PROTECTION
  Protects equipment from electrical surges that travel over Telephone and network lines.
• 8 OUTLETS
  More outlets for all of your power needs
• AVM (AUTOMATIC VOLTAGE MONITORING)
  Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns.
• HI DEF READY
  Hi-Def Designed to work with your High Definition system.

Technical Specifications

Weight
3.5 lbs.
Dimensions
12 in. L x 5 in. W x 1.75 in H (12.5 in. L Including brackets)
Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)
500V
UL991 Electronic Safety Circuit
Yes
Thermal Fusing
Yes
Single Pulse Energy Dissipation
1875 Joules
Response Time
< 1n
Protection Modes
L-N, L-G, N-G
Protect or Disconnect Circuitry
Yes
Power Cord
8 ft fixed
Plug Type
Right angle, 45 degree offset
Peak Impulse Current
65,000 Amps
Patented Power Management Circuit
Yes
Number of Isolated Banks of Outlets
2
Maximum Current Rating
15 A (1800W)
Line Voltage
120VAC, 50/60Hz
Initial Clamping Level
200V
Filter Circuits
1 Common Mode
Auto-Resetting Under-Voltage Shutoff
90V ± 6V
Auto-Resetting Over-Voltage Shutoff
142V ± 8V
1 Normal Mode
1 High-Current Inductorless
EMI/RFI Noise Filtration
High-Current Outlet: 50 dB(100KHz - 1MHz)
Filtered Outlet Bank: 53 dB (100KHz - 1MHz)
LAN Circuits
Wires Protected: Pins 1, 2, 3, & 6
Connectors: RJ-45 Shared with Telco
Connectors: Differential & Common Ground
Compatibility: 10/100bT
Clamping Level: 7V
Telco Protection
Wires Protected: 2 wire, 1 pair (4,5)
Suppression Modes: Metallic & Longitudinal
Fuseless / Auto-reseting: Yes
Connectors: RJ-45 Shared with LAN
Clamping Level: 260V
Capacitance: 30pf (approx.)
Universal Coaxial Protection
Shielded: Yes
Insertion Loss: < 0.5 dB
HD 1080 i/p Ready: Yes
Frequency Range: 5MHz - 2 GHz
Connections: Female "F", Gold Plated
Clamping Level: 75V
Bidirectional: Yes