Parasound Halo Series A 23+ Stereo Power Amplifier | 240W x 2 Channels | Black

Parasound Halo Series A 23+ Stereo Power Amplifier | 240W x 2 Channels | Black

The Parasound Halo A 23+ is a two-channel stereo power amplifier sized for installations where rack space and weight are considerations without sacrificing output capability. Occupying 3U of rack space in a chassis measuring 17.25 by 3.5 by 15.25 inches and weighing 27 lbs net, it delivers 160 watts per channel into 8 ohms and 240 watts per channel into 4 ohms with both channels driven, and 500 watts in bridged mono configuration into 8 ohms.

Peak current delivery is 45 amps per channel. Total harmonic distortion is rated at 0.06 percent. Signal-to-noise ratio exceeds 112 dB IHF A-weighted with the input shorted. Channel crosstalk is greater than 85 dB at 1 kHz and greater than 70 dB at 20 kHz. Both balanced XLR and unbalanced inputs are provided with a shared 29 dB gain stage. Power consumption ranges from under 1 watt in standby to a maximum of 800 watts, and the unit accepts 110-125 or 220-250 VAC selectable on the rear panel.

Key Features

• 160W x 2 into 8 ohms, 240W x 2 into 4 ohms, both channels driven
• Bridged mono: 500W into 8 ohms
• 45 amps peak current per channel
• THD 0.06% at rated output
• SNR greater than 112 dB, IHF A-weighted
• Balanced XLR and unbalanced inputs, 29 dB gain
• Selectable 110-125V / 220-250V operation

Specifications

• Rack Spacing: 3U
• Channels: 2-Channel
• Watts Per Channel: 201-300W
• Power Output @ 8 ohm: 160W x 2, 8 Ω both channels driven
• Power Output @ 4 ohm: 240W x 2, 4 Ω both channels driven
• Power Output Bridged @ 8 ohm: 500Wx 1, 8 Ω Bridged; 4 Ω operation is not recommended
• Power Consumption: Standby: <1W Idle (no music playing): 75W Typical Listening levels: 125W Maximum: 800W 110-125 VAC 60 Hz or 220-250 VAC 50 Hz AC mains voltage is set on rear panel
• Current Rating: 45 amps peak, per channel
• Total Harmonic Distortion (THD): 0.06% THD
• Power RMS: Yes
• Frequency Response: > 85 dB at 1 kHz > 70 dB at 20 kHz
• Audio Crosstalk: > 85 dB at 1 kHz > 70 dB at 20 kHz
• Impedance Input: for 28.28 V Output into 8 Ω Unbalanced: 1 V Balanced: 1 V per leg
• Audio Gain: 29 dB
• Sensitivity Input: for 28.28 V Output into 8 Ω Unbalanced: 1 V Balanced: 1 V per leg
• Signal to Noise Ratio: > 112 dB, input shorted, IHF A-weighted > 107 dB, input shorted, unweighted
• Amplifier Requirements: Audio Trigger: 2 mV - 10 mV
• External Trigger Voltage: +9 Vdc to +12 Vdc, 5 mA
• Connectors: XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return)
• Dimensions (W x H x D): 17.25" x 3.5" x 15.25" (437 x 89 x 388mm) (without feet) 17.25" x 4.13" x 20" (448 x 105 x 508mm) (with feet) Depth with cables: 17" (432 mm)
• Weight: Net Weight: 27 lbs (12.2 kg) Shipping Weight: 34 lbs (14.4 kg)