Free shipping on orders above $99* Details

Same-day Shipping for most orders before 10AM PST

Trusted by Professionals Since 1991

Limited time 5% off* code: LIMITED5OFF
Radial  |  SKU: RAD-XAMP500-R7000130

Radial X-AMP 500 Class-A Reamp

$34999
Shipping calculated at checkout.

Condition: New



Description

Radial X-AMP 500 Class-A Reamp

The Radial X-Amp is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit. The advantages of Reamping are many: when recording, the guitarist need only concentrate on the performance. Working out specific sounds and optimal mic placement can be done later. This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves. Using the X-Amp is 'plug and play' easy to use. The design begins with an XLR balanced line level input located on the 500 series rear panel that feeds the X-Amp. To ensure the very highest fidelity, 100% discrete class-A circuitry is employed. The X-Amp unbalances and buffers the pre-recorded signal where it then feeds two transformer isolated hi-Z guitar level outputs. The ¼" jacks are front mounted for desk-top convenience and equipped with ground lifts to help eliminate hum and buzz caused by ground loops. Independent level controls enable you to adjust the drive going to each amp for optimal tone. Should one of the amps be out of phase, depressing the 180º quickly brings both in line.

Key Features

  • Active Reamp designed for 500 series racks
  • 100% discrete class-A electronics for best tone
  • Transformer isolated to eliminate hum and buzz
  • Easy access front panel jacks & controls

Technical Specifications

Audio circuit type
Class-A discrete, transformer coupled
Frequency response
20Hz~20kHz (adjusted for guitar signals -5dB@20kHz) w 100K load
Total harmonic distortion
<0.002% @ 0dBu (20Hz~20kHz)
Intermodulation Distortion
<0.04% @ 0dBu input
Input Impedance
XLR: 1.2k Ohms
Output Impedance
XLR: 600 Ohms
Noise
-114dB below 0dBu
Maximum Input
+26dBu
Voltage Gain
XLR to XLR: 0dB ±0.5dB | Omniport to XLR: -3dB ±0.5dB | XLR to 1/4": -0.6dB ±0.5dB
Data Compression
40mA, ±16VDC
Input Connectors
XLR
Output Connectors
XLR, 1/4"
Extras
OmniPort configured as Hi-Z guitar input
General
Size (L x W x D)
Standard 500 series rack format
Shipping weight
1.5lbs (0.7kg)
Conditions
For use in dry locations only between 5°C and 40°C
Warranty
Radial 3-year, transferable

Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Radial

Radial X-AMP 500 Class-A Reamp

$34999

Radial X-AMP 500 Class-A Reamp

The Radial X-Amp is a 500 series module that lets you take a pre-recorded guitar track and send it back to amplifiers and effects so that you can tailor the sound to suit. The advantages of Reamping are many: when recording, the guitarist need only concentrate on the performance. Working out specific sounds and optimal mic placement can be done later. This eliminates hours of tiresome repetition while allowing the producer to adjust the character of the track as the production evolves. Using the X-Amp is 'plug and play' easy to use. The design begins with an XLR balanced line level input located on the 500 series rear panel that feeds the X-Amp. To ensure the very highest fidelity, 100% discrete class-A circuitry is employed. The X-Amp unbalances and buffers the pre-recorded signal where it then feeds two transformer isolated hi-Z guitar level outputs. The ¼" jacks are front mounted for desk-top convenience and equipped with ground lifts to help eliminate hum and buzz caused by ground loops. Independent level controls enable you to adjust the drive going to each amp for optimal tone. Should one of the amps be out of phase, depressing the 180º quickly brings both in line.

Key Features

Technical Specifications

Audio circuit type
Class-A discrete, transformer coupled
Frequency response
20Hz~20kHz (adjusted for guitar signals -5dB@20kHz) w 100K load
Total harmonic distortion
<0.002% @ 0dBu (20Hz~20kHz)
Intermodulation Distortion
<0.04% @ 0dBu input
Input Impedance
XLR: 1.2k Ohms
Output Impedance
XLR: 600 Ohms
Noise
-114dB below 0dBu
Maximum Input
+26dBu
Voltage Gain
XLR to XLR: 0dB ±0.5dB | Omniport to XLR: -3dB ±0.5dB | XLR to 1/4": -0.6dB ±0.5dB
Data Compression
40mA, ±16VDC
Input Connectors
XLR
Output Connectors
XLR, 1/4"
Extras
OmniPort configured as Hi-Z guitar input
General
Size (L x W x D)
Standard 500 series rack format
Shipping weight
1.5lbs (0.7kg)
Conditions
For use in dry locations only between 5°C and 40°C
Warranty
Radial 3-year, transferable

View product