Sheeran Looper+ Dual-Track Looper Pedal with 4 Loop Modes and USB Audio

Ed Sheeran's stadium rig shrunk onto a pedalboard. The Looper+ runs two independent tracks through custom DSP built by the HeadRush team, recording at 32-bit PCM / 44.1 kHz, so layers stack without the generational mush that kills long loops. Four modes cover the way people actually build a song: Single for limitless layers on one track, Multi for two tracks on a shared loop length, Sync for two tracks that lock to each other automatically, and Song for two tracks that run completely independently. The footswitches are die-cast aluminium - the same parts used in Sheeran's touring looper - and a 360-degree navigation wheel ringed with an RGB loop-status LED tells you where you are without looking down for long. 128 loops and over three hours of onboard storage mean a set lives on the pedal, and USB Type-B mounts it as plug-and-play storage so loops drag straight on and off a Mac or PC. It will run on 9 V DC, on USB bus power, or on four AA cells for six hours when there is no outlet in reach.

Features

• Dual-track looping with custom HeadRush-developed DSP, 32-bit PCM 44.1 kHz recording and 24-bit A/D-D/A conversion
• Four loop modes - Single, Multi, Sync and Song - covering limitless layering through two fully independent tracks
• 128 loops and over 3 hours of onboard storage; USB Type-B mounts as plug-and-play storage for drag-and-drop loop transfer
• Die-cast aluminium footswitches with hold functions, a 1.8-inch colour TFT display and a 360-degree wheel with RGB loop-status ring
• Runs on 9V DC, USB bus power, or 4 x AA cells for 6+ hours of untethered playing

Technical Specifications

• Tracks: 2 independent, with Single / Multi / Sync / Song modes
• Audio: 32-bit PCM at 44.1 kHz, 24-bit A/D and D/A, 2-in / 2-out
• Storage: 128 loops, 3+ hours total
• Display: 1.8 in full-colour TFT with 360-degree navigation wheel and RGB status ring
• Mic input: combo XLR + 1/4 in mono
• Instrument inputs: 2 x 1/4 in (stereo)
• Outputs: 2 x 1/4 in (stereo, mono or split loop-dry)
• Also: 1/4 in footswitch input, 1/8 in MIDI in, USB Type-B class-compliant audio interface
• Power: 9V DC 500 mA centre-negative 2.1 mm, USB, or 4 x AA
• Shipping box: 12.00 x 9.24 x 6.12 in, 5.51 lb

What's Included

• 4 x AA alkaline batteries
• 5-pin to 1/8 in MIDI adapter