Shure AD610 Wireless ShowLink Access Point for Transmitters and Receivers

Shure AD610 Wireless ShowLink Access Point for Transmitters and Receivers

Introducing the Shure AD610 Wireless ShowLink Access Point, the ultimate solution for seamless wireless coordination of Axient transmitters and receivers. The AD610 is designed to establish a reliable wireless connection, known as ShowLink, between your linked transmitters and receivers. This connectivity offers unparalleled remote control and monitoring capabilities, ensuring that you can effortlessly coordinate clean and usable frequencies, no matter the RF environment you're operating in.

With the AD610 ShowLink access point, remote control of all ShowLink-enabled Axient transmitters, including ADX and AXT series models, becomes a reality. Utilizing 2.4 GHz (IEEE 802.15.4) wireless communication, this access point allows comprehensive management of transmitter parameters directly from the receiver or with the assistance of Wireless Workbench. Changes to parameters, such as adjusting gain or changing frequencies, occur without interrupting the performer, ensuring a smooth and flawless performance.

Extend your ShowLink network by adding multiple AD610 access points to increase the number of supported transmitters or expand the operational range. This versatile access point features true diversity antenna inputs and mounting points suitable for 1/4"-20 and M6 x 1.0 thread, making it adaptable to any setup. Experience the future of wireless coordination with the Shure AD610 ShowLink access point.

Key Features

• Wireless connection between linked transmitters and receivers
• Remote control of up to 24 transmitters in real-time
• Adjust gain, change frequencies, mute signals, and more via ShowLink feature
• True Diversity antenna ensures a strong 2.4GHz connection
• Automatic channel selection scans 2.4GHz range for the best channel

Specifications

• Antenna Type: 2 Omnidirectional 2.4 GHz
• Capacity: 24 Axient ShowLink devices (AXT or ADX models)
• Mounting Type: WA371 Mic Clip or 1/4-20 thread mount
• Operating Temperature Range: -18°C (0°F) to 60°C (140°F)
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
• Dimensions: 190 mm x 102 mm x 47 mm (7.48 in. x 4 in. x 1.85 in.) H x W x D, without antennas
• Weight: 464 g (16.3 oz.), without antennas
• Housing: Extruded Aluminum
• Power Requirements: Power over Ethernet (PoE) Class 1: 36 to 57 V DC/V AC; External Power Supply (if PoE is unavailable): 15 V DC (600 mA), double insulated
• Ingress Protection Rating: IPX3
• Network Type: IEEE 802.15.4
• Frequency Range: 2.40 to 2.4835 GHz (16 channels)
• RF Output Power: 10 dBm ERP / 20 dBm ERP (dependent on applicable country regulations)
• Working Range: Typical conditions: 150 m (500 ft); Line of Sight, outdoors for a single system: 500 m (1600 ft)
• Connectors: 2 SMA (Shell=Ground, Center=Signal)
• Impedance: 50 Ω
• Scanner RF Sensitivity: -106 dBm, typical (integrated antenna)
• Network Interface: Ethernet 10/100 Mbps
• Network Addressing Capability: DHCP or Manual IP address (configurable using Wireless Workbench)

Package Contents

• 1 WA371 Wireless microphone clip for mounting on a microphone stand
• 1 C825 Shielded 25-foot Ethernet cable for ShowLink access point, RJ45-to-EtherCon connector
• 1 31A1856 Euro thread adapter for WA371