Shure QLXD124/CVL Wireless Bodypack and Handheld Vocal Combo System with CVL-B/C-TQG

The Shure QLXD124/CVL Wireless Bodypack and Handheld Vocal Combo System with CVL-B/C-TQG is an exceptional wireless microphone system that belongs to the QLX-D wireless family. This system is perfect for mid-size events, business installations, hotels, government offices, schools, houses of worship, and live performance spaces. Combining a handheld and lavalier microphone setup, it offers versatility and convenience for a range of professional audio needs.

The QLXD124/CVL system features the Centraverse Lavalier (CVL) clip-on cardioid condenser microphone, designed for easy use and high performance. The lavalier microphone’s unidirectional pickup pattern ensures superior vocal reproduction and noise rejection. Its small size makes it ideal for presentations where visibility is crucial. Additionally, the system provides a seamless setup compatible with any Shure wireless system, ensuring years of reliable performance.

Key Features

• Miniature clip-on lavalier microphone for low visibility
• Permanently charged electret condenser element for clear vocal reproduction
• Unidirectional (cardioid) polar pattern rejects unwanted noise
• Included tie clip allows hands-free use, perfect for presenters
• TA4F (TQG) connector integrates with Shure wireless bodypack systems
• Included windscreen reduces plosive, wind, and breath sounds
• Tailored frequency response optimized for public speaking and presentations
• Legendary Shure precision engineering

Specifications

• Type: Electret Condenser
• Frequency Response: 50 to 20,000 Hz
• Polar Pattern: Unidirectional (Cardioid)
• Output Impedance @ 1 kHz, typical: 600
• Audio Output Level: -43.5 dBV/Pa
• Signal-To-Noise Ratio @ 1 kHz: 72 dB
• Maximum SPL 1000 load @ 3% THD: 139.0 dB
• Dynamic Range @ 1 kHz, 1000 load: 117.0 dB
• Equivalent Output Noise Typical, A-Weighted: 22 dB
• Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
• Cable: 1.3 m (50 in.)
• Connector: TA4F
• Net Weight: 25 g (0.88 oz.)
• Mic Offset Range: 0 to 21 dB (in 3 dB steps)
• Battery Type: Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V
• Battery Runtime @ 10 mW: Shure SB900: up to 10 hours, Alkaline: up to 9 hours
• Dimensions: 86 mm x 65 mm x 23 mm (3.38 in. x 2.57in. x 0.92 in.) H x W x D
• Weight: 138 g (4.9 oz.), without batteries
• Housing: Cast aluminum
• Audio Input Connector: 4-pin male mini connector (TA4M)
• Configuration: Unbalanced
• Impedance: 1 M ohm
• Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp)
• Preamplifier Equivalent Input Noise (EIN) System Gain Setting >= +20 120 dBV, A-weighted, typical
• RF Output Connector: SMA
• Antenna Type: 1/4 wave
• Impedance: 50 ohms
• Occupied Bandwidth: < 200 kHz
• Modulation Type: Shure proprietary digital
• Power: 1 mW or 10 mW
• Dimensions: 41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D
• Weight: 777 g (1.71 lbs), without antennas
• Housing: Steel
• Power Requirements: 12 V DC @ 0.4 A, supplied by external power supply (tip positive)
• RF Input Spurious Rejection: >80 dB, typical
• Connector Type: BNC
• Impedance: 50 ohms
• Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Configuration: 1/4 inch (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground), XLR: Balanced (1=ground, 2=audio +, 3=audio -)
• Impedance: 1/4 inch (6.35 mm): 100 OHM (50 OHM Unbalanced), XLR: 100 OHM
• Full Scale Output: 1/4 inch (6.35 mm): +12 dBV, XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection: 1/4 inch (6.35 mm): Yes, XLR: Yes
• Networking Network Interface: Single Port Ethernet 10/100 Mbps
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Ethernet Cable Length: 100 m (328 ft)
• Frequency Options: G50 (470 - 534 MHz), H50 (534 - 598 MHz), J50A (572 - 608 / 614 + 616 MHz), V50 (174 - 216 MHz), X52 (902 - 928 MHz)

Package Contents

• QLXD2/SM58
• CVL-B/C-TQG
• QLXD1
• QLXD4
• Microphone clip
• 2 zipper bags
• 4 AA batteries
• Power supply
• Two 1/2 wave antennas
• 2 BNC cables
• 2 BNC bulkhead adapters
• Rackmount kit
• User guide